3 ways to use a Patch Bay // Why they're amazing but not necessary.

Рет қаралды 183,838

3 жыл бұрын

I often get asked for a breakdown on how my patchbay is setup, but there isn't too many ways to setup a patch bay. So i figured i'd make a video showcasing how to use a patchbay! There are 3 main reasons you'd use a patchbay. One of course is simple routing for your studio. It gives you easy access to your audio interface without having to rewire much of anything. Another is being able to Split an audio signal and send it elsewhere. With that you can multitrack FX and dry signals at the same time. Lastly would be to plug-in any new gear you might have just picked up without having to ruin your studio routing!
Best Patchbay - amzn.to/3h2Smk2
My Patchbay - amzn.to/3i3DOlh (bought mine used for $40)
Patch Cables - amzn.to/2GxJmXz
Once upon a synth video - • Why PATCHBAYS are AWESOME
See You Later Oscillator HAT - www.SynthShit.com
// Let's Connect
Instagram - / ricky_tinez
My Music (Most is free!) - rickytinez.bandcamp.com/
Spotify - open.spotify.com/artist/43aZ5...
open.spotify.com/artist/2DvaN...
What i use to get my music EVERYWHERE - distrokid.com/vip/rickytinez
Where i get most Samples - bit.ly/2EQK0im
// Everything I Film With
My Main Camera - amzn.to/3kpGhs6
My Lens - amzn.to/3kerS1z
My Mic - amzn.to/2WPiRQO
Free Video Editing Software - bit.ly/bmdr-rt
If i was stuck on an island i'd take this..
amzn.to/2VGs0gH
//Contact
EnriqueMMusic at gmail dot com

Пікірлер: 435

@RickyTinez 3 жыл бұрын

OnceUponASynth vid here - kzfaq.info/get/bejne/f8tofcKJz7XFdqs.html As well as the Samson patchbay I was talking about - amzn.to/3h2smk2

@toastyghosty489 3 жыл бұрын

Dope video but that link is dead for me.

@seanspartan2023 3 жыл бұрын

@@toastyghosty489 The link works for me

@elpotato198 3 жыл бұрын

What if you wanna hookup 5 synths to this and then depending on whatever one you want to route into your audio interface, you just patch it to there? so no bottom plug on the output for each synth, but a single output and no input on the channel for the audio interface?

@zenkomusic 3 жыл бұрын

Can confirm that the Samson one is very good!

@l1fef0rm 3 жыл бұрын

Are you familiar with the BoredBrain Patchulator 8000? Never knew I needed, couldn't live without.

@JamesReedy 3 жыл бұрын

Other big benefit Ricky is that it really reduces wear and tear on gear IO’s; better to clap out a $100 patchbay than an expensive or vintage piece of gear.

@RickyTinez 3 жыл бұрын

Yeah, I never thought about it that way! That is a completely valid point

@Morne555 3 жыл бұрын

my analog keys headphone output has a broken tip from a jack plug stuck in it, that was a major reason why i bought a patch bay.

@LeslieDugger 3 жыл бұрын

Even just moving the gear around to get to the output will cause wear and tear

@burprobrox9134 3 жыл бұрын

Leslie Dugger or could drop a heavy keyboard or something.

@LeslieDugger 3 жыл бұрын

Burp Robrox totally! I have a Jupiter 8 I’d hate see crash on the floor or on my foot!

@WillisZzz 3 жыл бұрын

I think what can add to the confusion sometimes, is our choice of words when describing connections, like "plug the input of your sampler/intertace IN to the output of the patch bay". If we instead describe things in terms of the signal flow, starting at the beginning of the signal chain and ending at the end of the chain, I think that would make more sense to more people. In that case we'd say "plug the output of your synth INTO the input of the patch bay and the output of the patch bay INTO the input of the interface/sampler"; to me that just naturally makes more sense. Does this make sense to anyone else? Personally, when I plug a cable into an output I don't think of it as plugging IN, I think of it as plugging OUT... By the way, great video, as always, thanks Ricky.

@stealthyBLK 3 жыл бұрын

you are right yes .

@sebhamel 3 жыл бұрын

Yeah exactly, the flow goes as a waterfall on the front of the patchbay, from top to bottom. Coming out of the top connectors to the ones on the bottom.

@Brokeninc 2 жыл бұрын

YES!!!!

@phxphy 2 жыл бұрын

I would agree. ❤️🤘🏼

@mrfender5001 2 жыл бұрын

I do the same so I understand my own routing better bc I lose myself easily on stage and hooking up rack gear in the home studio

@bentdmusic 3 жыл бұрын

You have such a gentle, kind way of relaying your knowledge. Such a refreshing video after seeing so many people shouting at me and not really making any sense while they're doing it. Showing your flaws and mistakes just makes it all the more relatable. Legend.

@hdslave 6 ай бұрын

Best explanation of normal half normal patch bay on the whole internet

@kennynyc15153 3 жыл бұрын

Finally a plug in play tutorial .. I dont know wh ypeople do tutorials with literature explanations instead of just physically showing ! TY

@someoneanonymous1 3 жыл бұрын

I don't know many KZfaq channels that get 27% of their subscriber base to watch videos 5 days since they are released. Just a testament to how being real, saying what you think, having a voice and sharing the love can create a strong community. Thanks Ricky.

@bahutu802 2 жыл бұрын

Truly a game changer! I find myself quite often depressed about the limited and inflexible routing capabilities of hardware mixers, like limited amount of channels, sends, receives etc., especially with regards to using FX or quickly sampling something into (or from) a device or DAW. I always thought I had to step up the game and go for a bigger mixer with more channels, with the 'perfect' routing etc... Just to browse gear websites and to find out that you can spend hundreds or thousands on mixers, and would _still_ be stuck with a relatively inflexible routing. And after all, for the typical (home) production use cases there is no need at all to mix together 16 signals or so at the _same_ time. Well, good to learn from that video that I just need a patch bay instead, and probably all routing dreams will be leveraged forever ❤

@J1M0TEE Жыл бұрын

I saw a badass routing trick in a video by the guy who made the Minibay. Let’s say you have a sound maker with a stereo output, for example a Volca Sample. Then you plug just the right channel on the patch bay into an fx input, eg a reverb. Now you can pan dry tracks on the Sample to the left and wet tracks to the right! So you can treat tracks differently in one box with one fx input. (The Minibay has a summed feature where you can sum up to three signals, so that you can separate wet from dry, but they’re still going into one input on a mixer, for example).

@ksutton1207 2 жыл бұрын

This is great man, thank you. I've been researching a patch bay and how it could simplify my studio setup. I've watched other videos, but yours is the most clear. I love that you go through live routing examples and also admit the "beginner" mistakes you made (hell, I would have done the same!). Huge help.

@Wraithan 3 жыл бұрын

I’m a few months into my synthdiy journey, this video was great for me as someone who’s never really been in someone else’s studio. I had no idea about what patch bays were, now I’m excited about them and going to make one for myself! Thanks, you got a new sub.

@kellymerrill8024 3 жыл бұрын

This just took me back to 2003 when I took an audio engineering class. Using the patchbay to route the school's buchla 200 through a gold plate reverb and record to digital performer, wish I saw this video then I hardly knew what I was doing.

@theFloxie 3 жыл бұрын

What a bro! when i've been trying to find info about patchbays otherwise they've always been the pure technical explanation of them (as i study audio production @uni this is no surprise) but i don't think i've ever found an explanation as concise as this. Straight 10/10.

@KozmykJ 3 жыл бұрын

We used to call that "Sniff & Break" Top row are Un-normalised outputs and Botom row are Normalised inputs as you have shown. So you can take a 'Sniff' of the signal IN/OUT from the Top or 'Break' the Path when you plug something into the Input on the bottom. That's fine for In/Out or Insert Points BUT then if you just want to present individual jacks from the back of equipment you 'Usually' just Flip the card around and the permanently plugged in rear side always breaks the connection between Top and Bottom , giving you a simple output. I know YOU knew that Ricky but the vid only hinted at the last bit. 😉

@jkarmas 2 жыл бұрын

Dude I've been trying to wrap my head around a patch bay forever. Your short hands-on video explains it all...I can see clearly now. Thanks Ricky.

@rflob 3 жыл бұрын

Just wanted to say thanks! This video taught me what the uses of a patch bay really are, and made me finally get one for myself, and it is a game changer! If you have a fair amount of hardware, say synthesizers, some effect units, perhaps a preamp, and on top of that some random gear you use now and then, a patch bay is the key to actually being able to use all your stuff.

@jakebromberg3476 3 жыл бұрын

I went and bought a patch bay because of this video. It's made a load of difference when reconfiguring my setup. Thank you!

@FrankElDragon 3 жыл бұрын

great tutorial, its nice to see you moving the cables arround and showing how it works and how the signal is routed. thanks !!!

@Gstation9 Жыл бұрын

Thank you for your simplified approach. No one could ever break it down to me like you do ! Your Awesome Dude !

@magadesto 3 жыл бұрын

Loved the video! I actually went and got the Samson patchbay after seeing OnceUponASynth's video showing how they worked. Once you start wrapping your head around the routing and all a patchbay becomes a crucial part of your studio, it makes everything work so much smoothly! Really appreciate your work, Ricky.

@K1llerTunes 3 жыл бұрын

I had no idea that a patch bay could be used as a plug-and-play effects send! Looks like I’m going to have to buy one now.

@grantm7864 3 жыл бұрын

Have been on the fence and this pushed me over. I need a few more cables but love the new setup, especially with the Thru option on the Samson. Thanks for all the videos and for changing my desktop world with this one!

@mattkaz9604 3 жыл бұрын

This is great. I bought a patchbay about 3 months ago, when it arrived I read the manual, realized I was confused, and it's been sitting on my desk taunting me ever since. I think I know how to set it up now in a permanent-ish way.

@ickebins6948 3 жыл бұрын

As an electrical engineer its quite easy to understand the concept but I see how it is pretty difficult for people with no background in electronics. Keep up the good work. Those "simple" videos are what makes your channel great. Not just gear reviews (which are awesome btw.) but everyday things that make live or gear easy to use and understand.

@jasonlehr4203 3 жыл бұрын

What an amazing video! I’ve been so curious about the whole patch bay thing but never understood it all. This dude took the time to go over some really helpful knowledge that I don’t seem to find to much help about! Thanks Ricky! Your channel is dynamite!

@JeremiahTrue 3 жыл бұрын

I've had a patchbay for years but never really used it. This makes so much sense. Thank you!

@diglet553 3 жыл бұрын

Funny coincidence, I was planning out my patchbay layout, then this video gets recommended 😅

@stealthyBLK 3 жыл бұрын

this was WONDERFUL! I had a patch bay setup years ago and I run my whole studio wired through it but I had someone else set it up and I've been just using it and not fully understanding how it worksBUT! thanks to you NOW I GET IT !! hahaha! I love your channel this channel is easily one of thee best channels on music on youtube YOU ARE APPRECIATED.

@JH-lo9ut 2 жыл бұрын

This is the solution! Now I can byu more gear without feeling bad for the stuff that is sitting around unused. From now on, everything shall be connected!

@ingjuanhidalgo 3 жыл бұрын

Thank you Brother, your explanation was very simple and fresh, I've always wondered how the patchbay worked, and now I finally understand it, thank you very much, Blessings from Caracas-Venezuela

@mynam3isnathan 3 жыл бұрын

Perfect Saturday content.

@masedrums 3 жыл бұрын

Ricky, I'm really happy you made this. But as the case with all of your videos, I love (especially during the pandemic) that it feels like we're just two friends hanging out in a room while you talk about what's on your mind. I haven't been able to see my friends much during the last four months, but it used to be that whenever one of us would pick up new gear, we'd hang out and try it out, and discuss what it does and what we're going to use it for, etc.. A lot like you do on your channel. So, thanks for illusion of normalcy.

@hardcoreherbivore4730 3 жыл бұрын

This is exactly what my studio needs. Started feeling like too much gear, but no more. Thanks

@andy-cool 3 жыл бұрын

Thank you very much, you explained it simply and understandably, finally I can use the 2 patchbays I have for several years just as they are to be used!

@StripeyType Жыл бұрын

I am not sure how I fell into musician youtube - I have zero musical talent and am awfully intimidated by it all - but you are making me wish that I did! This was a great explainer! In what, just fifteen minutes, you took me from not really understanding what a patch bay is at all to having what I think is a really solid mental model for how the four jacks of a single channel on a patch bay work, to the point where I *think* I can probably draw a schematic diagram of what's going on, and *maybe* even make a single channel patchbay unit on a breadboard! (though electrically that would absolutely be terrible - there'd be horrible electrical noise just due to the way breadboards work)

@SemfanyPro 3 ай бұрын

This was the video that I first found years ago that led me to your channel. Good meeting you in person today! and thanks for all the advice over the years.

@raysharpe8644 2 жыл бұрын

I use my patchbay to mirror my mixers inputs and to patch in my synths and MPC. Good for connection options and ease of use. Great content as always Ricky 🙏🏾👊🏾

@dolomiten 3 жыл бұрын

Awesome explanation. Thanks a lot. Your content is so well made, always informative and easy to understand. I appreciate it a lot.

@racializedkanadian 2 жыл бұрын

thnx man. this answered some questions that a lot of other videos ignored. much appreciated.

@MrMarcLaflamme 3 жыл бұрын

So glad you had second thoughts and played us out. 😄

@SentaAerger 3 жыл бұрын

Ok so turns out i've been using my patch bay wrong for the whole time and this makes so much more sense. This was REALLY helpful, thanks!

@essmunson 2 жыл бұрын

god thank you for being so down to earth about this, I've watched 3+ vids and I struggled translating them into how to use em with my setup until this one

@niktonpanaflex7831 3 жыл бұрын

Yo. This was super helpful. Was literally pricing patchbays last week and stopped suddenly when i realized I didn't quite understand how it works. Thanks!

@wpf312 3 жыл бұрын

Never could fully wrap my head around these. Have had one sitting in my rack forever lol. Thanks for the breakdown!

@walrtbstudios5430 3 жыл бұрын

Watching this makes me really glad I work with a) an iPad and b) a four-in/two-out Steinberg interface. When something just drops out I know it’s the synth, not the way it’s connected.

@SKimbrough 3 жыл бұрын

Thank you for this! I was looking for a good simple approach at understanding since I just picked up a Samson 48 patch bay. Glad I came across your video! Now I get it as it was recommended to me a while ago to invest in one but I always thought it was for people with “real” setups like serious musicians such as yourself. I’m running the Peak, Analog Four and MPC Live into the OT (what an amazing device that I finally received last week!). Was trying to figure out how to get everything to run through the OT for recording and triggering/control while always having that MPC ready for samples without unplugging constantly. Now I get it! I’ll check at that link and tell him you sent props. Good deal, Ricky. Respect.

@LillianFrances 2 жыл бұрын

watched this a few times in a row and it helped clarify a lot. thanks!

@RobSmithSmithsonmusic Жыл бұрын

Thanks so much for this. My right-brainedness has been having trouble processing the process of using a patch bay and getting all my gear setup and ready to go at a moments notice. This clarified a lot of stuff for me.

@noahsiekmann4275 3 жыл бұрын

Great video! I've been so confused by patchbays! This video was exactly what I needed to know.

@dnaldoog3114 2 жыл бұрын

Thanks for this - my old Tascam rack mixer stopped working - I have been using it to select a (only ever one) synth and record back to DAW for years - When I saw this I couldn't believe that this is what I was after (never needed a mixer at all). I found an old patchbay at a secondhand store. It is probably some kind of IQ test, which I am failing often, but I think I understand now thanks to you and the OnceUponASynth video - amazing!

@calebestes4990 3 жыл бұрын

This is great info Ricky. You’ve convinced me, I’m gonna pick up a patch bay.

@BecomingProductions 3 жыл бұрын

Very helpful video Ricky. Great timing too as I've just upgraded to a bigger mixer (QU32, built in sidechain, mmmmm nice) but with the increased size its not so easy to get to the inputs at the rear. I was considering a patchbay as I knew they could help, but got a bit confused with the different routing modes and wasnt sure if it was the right option. Your video was a huge help, cheers dude.

@toddtyler 3 жыл бұрын

This is extremely helpful, and related in a really accessible way. Thanks so much!

@willh7352 3 жыл бұрын

Thanks. This was very useful; I ended up just getting a $5 mixer from a Goodwill, and it works pretty well. Not sure if I'll need a patch bay, but I definitely will need a new sound card for more inputs.

@mastaboog749 Жыл бұрын

can always count on my dude Ricky to have a video touching on some subject i'm looking into!

@rashriddimz6668 2 жыл бұрын

This is the clearest and most coherent way of explaining how to use the patch bay.🔅

@DJ_PROMO_PR 3 жыл бұрын

THANK YOU so much for this video. Simple and to the point unlike other videos I've seen. Had the Samson on my Amazon wish list for the longest but I'm waiting to get one used cheaper on eBay. I'll also checkout the OnceUpon video.

@andrewmartin8929 3 жыл бұрын

Man, I've been struggling with some issues and you helped me out a lot with this video. thanks.

@jeffmallory3907 Жыл бұрын

Your comments really helped me a lot, thanks!!

@casimirliberski 3 жыл бұрын

Dude thanks for your honesty and making it clear

@Spheredj909 3 жыл бұрын

Iv been wanting to explore patch bays for a while as my gear collection is growing and I have to keep unplugging stuff, actually so fucking intimidated by them, until I watched this. 10/10 explanation man, totally get it. Legend. Thanks for your time, vids are always so helpful. 🤙🏻

@JaysonAngove 9 ай бұрын

Awesome video super helpful! Thank you for taking time to make this video!

@lorenzschmidt6484 3 жыл бұрын

Man ur awesome! I been seeing so much videos bout patchbays which suck so hard. U opened my eyes and I finally got it.

@holywaterandgreentea Жыл бұрын

Excellent and Beyond Thanks! This saved me a lot of time and research.

@stulora3172 22 күн бұрын

you just saved me a week or three of experimenting

@repeatdefender6032 2 жыл бұрын

Man I love the way this dude explains things, I finally get it.

@3xAudio 3 жыл бұрын

Great video man I've had my mind boggled many times with patch pays. Especially when they have a lot of gear like multiple compressors and effects etc

@soulsoap3440 3 жыл бұрын

Thanks Ricky, really useful video. I was getting backpain each time that i change my routings

@MikeA0110 3 жыл бұрын

This video, and more to the point,, your casual every guy mannerisms just compelled me to subscribe. You come off as a cool dude, the kind of person anyone would count lucky to have a beer with. Best regards

@Sharon-music 3 жыл бұрын

im sitting here shopping for a patchbay thinking about how im going to route everything and so on. And then PLING a notification showing me that you want to tell me all about patchbays :) Lovley

@justinmeisse 3 жыл бұрын

I got a patch bay because of this video. It's taken me a couple of re-watches to completely grasp things.

@beesechurger1466 3 жыл бұрын

Great vid! I’d love to see you make a vid about some of the korg volcas if you have some lying around. Being small analog synths, it seems like it’s be right up your alley!

@mapache_al_ataque Ай бұрын

Just got a Hosa PBH -185. This was super helpful. Thanks!

@illzeeski 3 жыл бұрын

nice, i was just thinking about looking at patch bays earlier in the week, thanks for a bit more info.

@Stadsjaap 3 жыл бұрын

I have all my pedals and fx running through my patchbay. Makes daisy-chaining different combinations super easy. Another cool trick: lots of synths have input jacks for using their filters or onboard fx. Perfect for routing to the patchbay for instant access.

@mitchellkilpatrick1647 Жыл бұрын

Dude this was great! I wish I would have had you as an audio professor. Thanks for the great video!

@lawrenceonethree6872 3 жыл бұрын

That was eye opening. I had no idea how these things worked.

@MouldySoul 3 жыл бұрын

Beautifully explained there thank you.

@elpajaropez 11 ай бұрын

Beautiful explanation! Thank you very much Ricky!

@walkermcneill8223 3 жыл бұрын

lol this is perfect timing, I literally just got given a free patch bay and a shit ton of 1/4" cords when i bought my mixer recently.

@SmoothSailingMusic 3 жыл бұрын

Watched the OnceUponASynth vid a couple days ago and ordered a samson switchable. Still trying to get my head around them and this video is on point!

@klite789 2 жыл бұрын

This was EXTREMELY helpful, I really appreciate this!!! 💚💚💚

@edaten4205 2 жыл бұрын

This is tremendously helpful and clear. Thank you!

@ron2298 3 жыл бұрын

Thank you 🙏 lol good stuff. Awesome videos as always. Great info. I definitely need one but didn’t know to much about them. Awesome stay safe

@harrymindgameTV 3 жыл бұрын

Thanks for this. Just when I needed a great explanation.

@yaveeeoneandonly4870 3 жыл бұрын

The most vital piece to a studio!

@AllThatsGone 3 жыл бұрын

Always timely. Thanks.

@fingerstylefunkable 3 жыл бұрын

Thanks for this, super needed for me.

@fkngroove Жыл бұрын

Thanks Ricky! Nice video and info!! very helpfully

@longlostrobots8146 3 жыл бұрын

This is the best thing I’ve seen in a while

@spacepope20k 5 ай бұрын

Super informative. Also I love how quickly we turn into Tina Belcher groaning when we get nervous about our gear xD.

@songsbyrickbushnell9061 3 жыл бұрын

Nice one, well explained.

@oztrekgelsoft8409 2 жыл бұрын

That was explained extremely well thanks for you help 💪🔥

@normandyflash 3 жыл бұрын

I just bought one one week ago (in France); and I have to admit as a beginner it was very difficult to me to understand how u have to plug it... I looked on the Internet and I found nothing... Anyway, thank to a previous video of Ricky, I finally understood how does it work... My point is I am sure that this brand new video about patchbay will be useful to a lots of people.

@RickyTinez 3 жыл бұрын

Hopefully you found it helpful! Thanks for the support and I’m happy to help

@chris.dillon 3 жыл бұрын

I also had a hard time figuring it out. I looked for youtube videos. It's been a studio standard for so long that maybe people don't want or need to revisit it. I had to do some tests with one in hand to get my head around it. There are some conventions out there to keep you sane and organized. It can be just a mind bender sometimes. I have mine labeled and understood but I still talk to myself when changing routing. I think I have a very cool and unique setup with the octatrack and samson mixers with the sends but it's not at all perfect or a massive real studio console. I should make a video about it ... :\

@normandyflash 3 жыл бұрын

@@chris.dillon I would be glad to this video; u should make it.

@normandyflash 3 жыл бұрын

@@RickyTinez Hello, Ricky. Your videos are a great help to me : especially the last videos where u described your process/workflow with your MPC, etc. I have been owning studio gears for many years but my studio was not very organized and it was boring to use all my gears... Therefore I just did not want to make music anymore... Then I found your channel, and watch several times your videos where you described your workflow, how u use the mpc then record the whole thing in Ableton, etc. And it made me reorganize my studio, buying a Behringer patchbay and changing the way I made music before... Now, I feel very happy when I enter my studio (which is in my bedroom, by the way ;o) ) So, as the Frenchs say: " Merci beaucoup à vous, Ricky ! " Seriously, I mean it: thank you very much, u save my studio and my love to make music, Ricky.