I love the Federal Terminal Ascent rounds they turn the 30-06 into a.300 Win Mag absolutely great rounds designed for getting it done at normal ranges and long ranges

Were these domestic or wild cinder blocks? I am planning a cinder block hunt, and it appears that either would be suitable rifles. I was hoping the Win Mag would shoot through more than one black, since wild cinder blocks often travel in packs.

Great Video! Personally, although the 300 win mag is great for a little longer distance, experience has shown me both the 30-06 and 300 win mag commonly shoot the same kill range in hunting (0-400 yards). There's just not enough difference for me to trade my 30-06 for a 300 win mag.

Obviously the .300 win mag is the more powerful round, but you can never go wrong with a 30-06

The energy was dumped entirely into the first block. You need to test a penetrator round.

I've been considering buying a 300wm, and your video has convinced me. That energy dump was impressive. Thanks for the vid!

Cool video! Curious to see what FMJ version of these two rounds would do.

For this to be a valid test, you need to use 180 grain military solids in both cartridges. Another choice is 220 grain solids. In this sort of test, softs will break up in the first cinderblock as demonstrated in your own video.

I didn’t realize it hit that much harder, thats insane.

Again, 300 win mag, not a lot of penetration, but just total obliteration! Man..powerful! Thanks for the video buddy!! Have a good weekend!! WHO TEE WHO!!!

Love the videos, keep 'em coming!

3006 is my main stay. 300 win mag sure has more destructive energy on impact. I unfortunately dont own one. I still love my 3006. And my 308 and....... Yes its love.

Wow, that .300 winmag hit harder than a sledge hammer.

I bet you had to get a steam shovel in there to move those cinder blocks around! Haha. Another great video. Thank you Sir!

The 300 Win Mag has more punch for sure . Great test ! Have a great weekend ...

You’re a legend, WHO_TEE_HOO!! Love your videos! Many thanks from Sydney, Australia 🇦🇺 🍻

Good stuff. I would love to see you do this test again, with a steel core ammo. 300 win mag looks like a sledgehammer.

It'll be cool to see what the shots with the 30-06 fmj will do to something like those blocks.

Sounds like me and others want every test between these 2 great calibers.Yea,do it.Great Video 06 vs 300

My ruger 350 legend will shoot around 1in all the ammo I've tested so far really happy, loving your testing you do for us keep up the great content will be watching.

Very good. I'm a bit surprised at the result. I would like to see the same test using armor piercing rounds of both rifles. Thanks for the upload.

Howdy, just subbed. Great channel. Thanks for all your hard work.

It seems to me, that test was a great example of the Win Sup X controlled expansion. I have no experience with this bullet but it seems to me that it did what it is designed to do. It delivered its energy in the “cavity”.

In the slow video it looked like your round hit the top of the 3rd wall as it was skipping out, so I think if you had the second block stacked 2 high you would have recorded a hit on the second just at a different trajectory... Still nice and thanks. Was gonna get a 300 Win Mag but will stick to my 3006 (same difference less kick).

I hit a doe with a 300 win mag at somewhere around 250 yards broadside, dust flew up on a hill behind her about another 200 yards away, she dropped immediately.

every now and then I like to watch some classic WhoTeeWho. This is definitely it.

I've had both I shoot a savage 110 30-06 now and honestly there isn't much difference. Both are VERY deadly and are almost caliber siblings so to speak. Love the Vida man keep em coming. I'd honestly love to see fully auto uzi vs mp40 holding 10 sec increments on trigger. That's hype lol

Looked like that 300 drove a bus through that block ! Great video! Thank You!

just out of curiosity,what barrel length were on both rifles..i would think,if the 300 win mag had a 26 inch barrel,like most model 70 Winchester come with standard,i bet the 300 win mag,would of breached the next block...some extra velocity might of helped..both those rifles,did not appear to have barrels longer than 22 inch..at least on the 3006...what length barrel did the 300 have on it?

I've done tests like this with milk jugs filled with water. Lots of fun watching water go everywhere!

I’m kinda surprised that the 300wm didn’t at least crack the second block. Anyway good video I may try the same thing with custom reloads

I think it would be awesome to see, what the .300 win mag (or the whole line of high power rifles) does to a large flint stone. Do you have flint nearby? Mailing a box full of flint from Denmark to the US would be impractically expensive, but sort of worth it :)

"Did it go poof?" Sure did - and what an awesome dust cloud :-D

400 yards and closer either one will get the job done. One downside is the winmag hits the shoulder with like 30 percent more recoil. Its a fine round but there’s just something special and iconic about the .30-06. Rifles can be more convenient in 30-06 Springfield because performance can be maximized in 22- to 24-inch barrels while the bigger magnums require longer, heavier barrels of 26- to 28-inches. The lighter recoil level of the -06 also means lighter weight rifles can be carried on tough hunts involving considerable hiking and climbing.and its why its the shooters choice in more guns. Its been around for years and its not really been supplanted by anything without introducing some negatives in the process.

wow that was impressive... that second one to me was a lot more shredded, 300 win mag !!! I have the same rifle as you in the 300 win mag, with cheaper blocks i did get two with the win mag and one with the 30.06, both rifles Remington 770 and I used core lokt 180 grain but again it was cheaper blocks, love your vids, keep them coming

Do test with the heaviest bullet for each caliber. I think you restricted the performance of the 300 to make it a heads up test. I believe the 300 will really shine above the 30-06 if you take both to the limit of store bought ammo.

You should try to find some fmj's for the 300 win mag an 30-06 to help control the expansion better to see how far they can go next time. Powder puff with win mag lol. Gr8 vid.

To compare true penetration you would need to use armor piercing rounds. The cinetic energy on the larger more powerful rounds does funny things to the structure of the bullet. There you go who 2 who hoo, think bro think.

Just got me a Rem 700 bdl 300 mag. LOVE IT!!

Nice testing as always fun....Good stuff...

I’d be curious to see steel core penetrators or just a regular FMJ instead of hunting rounds designed to rapidly expand.

My opinion is the30/06 is the most all around caliber there is. Can load spitzers all the way up to over 200 grain, controllable, can find rounds anywhere, and most importantly it can take down any animal on this continent. Nothing wrong with .308 and .270 at all but my bias leans toward the 30/06.

If u split the first wall of a block it will surely split the other two as well.... Statics..... Just put up single walls not connected to each other to get a more expressive result... Nice vid! Love the 300wm!!

Wet and hard target really shows ya how that round dumps energy

Gotta try something over 180gr with that win mag .

Very interesting, thank you 👌

Anyway you can try this with M2AP loaded in both brass cases?

Do you have anything on 7-08 remington caliber?

Just wondering if you could do a video on 300 win mag soft point damage. On a pork shoulder or ballistic gel with ply wood in front. To show performance.

Try some "ballistic" pasta. Needs to be kind of firm, not all mushy leave a little water in ... I see a big mess on the horizon. Which has more stopping power: macaroni, macaroni and cheese, spaghetti, elbows, bow-ties... Make a 5 gal bucket from big box store and have at it . Could go full spectrum here with many cartridges; 30-06, 300WM, 45-70, 45ACP, .357..... you get the idea.

That was a good comparison using the same grain projectile. However the 300WM having that magnum load behind it caused much more lb ft of energy on impact. Try and increase the 300WM round to at least a 210gr round. One of my experiences in the 300 is lighter projectiles with that magnum load start to break down before impact. I've stepped my loads up to a 210 accubond load and noticed much more bone crushing power than the smaller 180 gr load.

I hope that you give the dust from the Cinder blocks time to dissipate before approaching the target blocks . Granted you are outdoors ( open air) which is a plus for your lungs . You might want to consider a dust mask on not too windy days.

From whitetail deer to Kodiak bears ' the 300 win mag is my choice. Very hard hitting . It's my all around caliber.

Need at least 190 Grains. 200 Gr. is where the WM really comes into its own. Also, choose quality bonded bullets or solids built for penetration.

Great video get some FMJ for both them guns

A quick guess, maybe same penetration but more explosive damage on the entrance hole with the Win Mag. I'll guess clean through block one, stopping before entering block two.

Great Video,In the future it wouldn't hurt to get you a black magic Marker and draw a target on your cinder blocks.

Idea: Cement some blocks together to form a wall then shoot it from the side to see what would happen if you tried to shoot through the wall of a building .

Great video thanks for sharing Brother 👍🇺🇸

Nice video. Love it. Good as always

Hey bud I've been wanting to know the difference for a long time how big of a difference does the 300 win mag kick vs the 30-06. I've wanted a 300 my whole life and I can shoot 308 and 30-06 really well. Looking forward to hearing back from you. Thanks. @WHOTEEWHO

Yea Buddy! Way to go Whoteewho!

With150gr 30 cal bullets the 3006 is 2850 FPS and win mag is 3200 FPS so it has a little more energy, 2400 vs. 2900 foot pounds so 300WM is about 20% stronger.

Now if you did this test using the same Barnes X bullets, I bet that the penetration for both would go into the second cinder block. Concrete is too hard for a standard lead/copper bullet and simply falls apart, thus loosing all its energy.

Try it with partition bullets or trophy bonded bear claws and see how they do. These bullets are made to expand very fast here

Same thing as with the 308/30-06 test before: different cinder blocks with different wall thicknesses... Interesting though how even with the thinner wall, the 300wm did not outpenetrate the other cartridge

Love your videos btw.

Interesting, I wonder how a hornady 30-06 superperformance will do against stock 300 wm.

Good vid!

The bullets are blowing up before getting through. All the energy is being dissipated in that first block. Very cool

They're both a .30 The 300 just has a little more energy and I mean just a little. Read ballistic recordings on both. The only big significance between the two is price. The 300 cost about a buck more per round, and a good 300 vs a good 30/06 cost about 1500 more.

Similar to yesterday's water jug video. The 300 Win Mag really blows apart the objects it hits but doesn't penetrate any further than lesser rounds.

Great video. Damn that 300 win mag is stout.

May I just say, as I am commenting at the beginning of the video, wouldn't a cinderblock test be better done with FMJs?

Use barnes ttsx ammo in 300wm and 30/06

When I go cinder block hunting I will be sure to take the 300 mag. But for deer and elk I will take something else that will kill just as good without the recoil beating the snot out of me. Same goes for the 06. I'm old and paid my dues. You younger types can go ahead and shoulder a mule. Thanks very much for the vid.

try hornaday superformance vs cheap ammo, 165 grain 30 06 superformance deliver 3210 ft lbs of energy, that like 200 more than normal,

Gotta love blowing things up!

now gets some m2-ap loaded to 3200 in that wm.rock popper.

Good video, can you do a video on 308 Win vs 30-06 vs 300 Win vs 338 lapua mag vs 338 Win mag please?? Thank you for the video 👍🏻

Good stuff

If you can get one try a 35 whelen against that 300wm you will be amazed at the energy dump of the 35.

I think it's going to take one of those fancy .45-70 copper bullets to get into the next block

Good job on the comparison. But your previous videos showed 3006 blew that cinder block in pieces as well. You bet the 300 win mag got more bang but the 3006 is not far behind. Now compare that 300 win with a 7mm rem mag. Awesome videos by the way.

you need to buy a slip-on "Limbsaver" to put on that synthetic stock WinMag.....at least!..... maybe epoxy some mercury rods in the stock also to make it more comfortable to shoot....just a thought for you

Who_tee_who I would love to see more of the 300wsm

Definitely would like to see what a 338 wm would do!!?? That 300wm is definitely a bruiser!!!!!

nice video man.

You try this with the copper bullets?😊

Interesting not exactly what one would expect. would like to see your comparisons using ballistic gel

I know this is old -- but, experimenting with handloading tells me one thing. If you can nail the perfect velocity for a specific type of round it will penetrate. If you are moving so fast, the energy is dumped. The thing about this test is that AT DISTANCE the 300 win will most likely out-penetrate. Essentially, as long as you are within velocity limits of proper terminal performance (usually said on the box, like Nosler Accubonds at 1800 fps) the bigger cartridge allows you to push the distance. The question is always by how much?! Could be 300 yards, could be 30 yards. For hunters, you have to ask yourself - is the recoil worth it if I'm hunting XYZ distance?

From what distance?

Дружище у тя все калибры одинаковые по проникновению по твоему?

must use all copper tipe of bullets like barnes tsx .The bullets diintegrated and penetration sufferd on both

Hi nice testing 🙂🙂👍👍

I have an 8mm mag. Like to compare it with my 300 win mag

Would like to see if that 300 Win mag could split the log

When you need to demo a cinder block wall use 300 Win Mag!

The.300 WinMag told that block to GET THE HECK OUT OF HERE!

Yeah, woiuld be a better test if the blobks were filled first...or for lack of better, would it go into a foundation wall.