360 LIVE: Generative Design Tips & Tricks

No video

360 LIVE: Generative Design Tips & Tricks

Рет қаралды 30,537

Күн бұрын

**skip the countdown 2:56 **
We know you've been getting a ton of solves and designs out of this free-generative-design-extravaganza, so by now we thought some tips & tricks would be timely! In this live stream, Matt Lemay will share his favorite tips and tricks, to ensure you're getting THE most out of each generative design.
Generative Design overview: help.autodesk.c...
►SUBSCRIBE: autode.sk/2UvfzRh
►COMPARE: autode.sk/2HsSICc
►TRIAL: autode.sk/2CA9NqC

Пікірлер: 31

@In-My-Garage-Build-py6pc 7 ай бұрын

Thank you. I enjoyed the tip on 2 axis vs 5 axis providing different build outcomes (sketches and tsplines) was not aware of this. Cheers!

@WereJoebin Жыл бұрын

This works pretty well for me when designing fixtures and brackets with organic geometry. it just takes so long to solve each simulation.

@In-My-Garage-Build-py6pc 7 ай бұрын

Would take much longer than doing the calculations 😂

@xinhu1182 3 жыл бұрын

Very detailed lecture. Through this lecture, I fully understand the flow and usage logic of FUSION360's derivative design. Then I will start the practical exercises.

@ride_panzer Ай бұрын

I’m not sure on the pre baking but it could be true. Anyway it’s a cool program thanks

@argentosebastian 4 жыл бұрын

Thank you. Very informative video. When are we going to be able to order the machined parts from Autodesk?

@GrizzlyTheMechanic 2 жыл бұрын

Hello there, thank you for the great video. After getting outcomes there no history below so I cant get in the organic mode. How can resolve this problem?

@hfcandrew 2 жыл бұрын

When you have an organic generative looking shape, is that modelled as a triangulated mesh?

@MrCoffeypaul 4 жыл бұрын

Point of interest, you can make castings out of stone( or to be more accurare concrete) but is of little relevance to mechanical engineering( purely ornamental )! Great video especially considering it's only your second live! Anyone know if a solid state drive on a laptop is faster for running simulations?

@adskFusion 4 жыл бұрын

SSD's are faster for everything (and I personally couldn't do without one nowadays). BUT, if you're talking about for generative, because it's done on the cloud, the only time it would make a difference are when downloading results or the limited times it stores files locally.

@adskFusion 4 жыл бұрын

In my past, I worked some tech support, and we often found that hard drives are the biggest bottleneck for intensive software/designs.

@MrCoffeypaul 4 жыл бұрын

@@adskFusion Well we could be looking down the barrel of Quantum computers courtesy of Google and that will have consequences from science and engineering right through to weather forecasting. Kind of a far cry from the draughting boards!

@americorosales2085 4 жыл бұрын

thanks was very important knowing Generative Design

@adskFusion 4 жыл бұрын

Glad you could make time to watch this!

@Foldingblade 4 жыл бұрын

i saw (in the phone app) a steering wheel *sample design* i wanted to use the shifters for my own wheel but on the pc app of fusion360 i didn't see it in design samples ??? is this normal if not how can i get it or were can i download it i send fusion 360 a screenshot but i got no reaction

@adskFusion 4 жыл бұрын

Where did you send Fusion 360 a screenshot? I haven't seen it. That said I found the file you're talking about. Its just a sample included with that app, which are different than the sample files included with Fusion 360. To get to those, see here: knowledge.autodesk.com/support/fusion-360/learn-explore/caas/sfdcarticles/sfdcarticles/How-to-access-samples-files-for-Fusion-360-tutorials.html

@afilias1967 4 жыл бұрын

where we can find finite element analysis?

@adskFusion 4 жыл бұрын

Its its own workspace. See here for more details: help.autodesk.com/view/fusion360/ENU/?guid=GUID-62FC5305-6B73-407B-82AB-70DFD5F1EF60

@youtubechannel4137 3 жыл бұрын

tip 17 - to adjust gen des geo

@sangeethkumar33 4 жыл бұрын

I have planned to manufacture bike frame in generative design ! Can you give me some tutorial on it

@sangeethkumar33 4 жыл бұрын

Like @6:23

@adskFusion 4 жыл бұрын

We don't have anything planned in the near future for this, in fact, after this free period is over we'll probably focus back on other parts of Fusion 360. Sorry about that...