Nothing sounds better than a 350 small block.

With a motor like that , who needs a stereo system. Beautiful sound.

I need one of those outside of my bedroom window wired to my alarm clock.. I'd wake with a smile every morning.😂😂

I’m going out to the garage to kick my Honda right in the nuts !

Sometimes the KZfaq algorithm gods just smile down on me, and this was one of those times. This is an older video but what did that beauty end up in?

The sound of a well tuned chevy is a joy to my ears, thanks for sharing

I've waited over two months for a camshaft from one of the "big name" companies. They blame it on their suppliers. I finally canceled the order and called Erson Cams. Better cam for nearly the same price. He said it would take 10 days for it to get into shipping. That was on a Thursday. It showed up at my door on Monday! There is no doubt who will supply my next cam. The new engine is moving right along now. I still have some mounts to make.

Forget how nice the engine is. The cooling system is outta this world !!!

This is what I want to do when I retire. Build motors and sell them just for something to do. Beautiful setup and motor. I love the sound of blower motors

That surge, them lumps, could listen to them all day, everyday!!

..getting one installed in my living room. Grab me a beer, sit on the couch, then rev the engine a few times.

I've alway's like the sound of V8's with header's&true dual exhaust but this setup with 2-4barrel carb's&supercharged just makes it even better,Awesome build,my2cent's.

I had a 383 stroker in a 72 camaro. No blower, but with a 350 hp big shot nos kit. 750 hp total. Ran low 10s all day. Awesome engine. I miss it😢

That idle can literally sing me to sleep it sounds so amazing!!!

a big part of that idle surge is the 8% under driven blower. awesome sounding little small block. good job.

There's nothing like the sound of a blower motor 👍

now THAT gets me excited!!

Back in the day (60s) this was every street-rodder's dream engine.

I'm watching this video with my morning coffee so awesome I'm awake now

This build put a smile on my face this morning...that motor sounds great

That thing has a heartbeat. I am in love....GET YOU SOME OF THAT!!!

Idles up at the end ....sounds awesome, a great motor, fit for any Tri 5 Chevy

I love that motor. Very nice clean build and great for showing others the setup. Thanks !

OK SMARTY BUM. You have my ultramodern uptodate attention. Your OlSchool approach to all things cool has my ears on high alert. I own a very neat and restored Australian 1966 Valiant V8. To see and hear your work is very exciting. Thankyou for your motivation and dedication from the other side of the world. Horsepower translates universally.

This engine ended up installed in a 1948 Anglia driven on the street by a 70 year old man. Replaced carbs with 680 Holley blower carbs at his request.

That is such a sweet sound. Very nice job you have done there.

That seems a little excessive for just those four castor wheels....

Great job ...Awesome Engine build !! Thanks for the video.

that is badass brother nice work

great looking and awesome sounding engine!

You just got another view 👍👍great motor

Awesome sounding Motor great build

What a beautiful sound!!!

Say lean but noticed throttle blip fires a quick rich pump shot out of the exhausts. Sounds more like float levels upsetting the emulsion tubes mix. Change to Holley's and setting levels and metering blocks are way simpler, same for secondary actuation etc. Correct timing curve and fuelling is a must and expensive if you get them wrong! Was hoping this wasn't a blooper clip where a big torque rev sends it spinning off that rediculously narrow stand. They are not designed to be dyno stands lol. I recall coming into a shop where they were trying to start a 402 BB on the floor with a similar setup. Thankfully I found their firing order was out and prevented damage and injury! His loose shirt tail in the latter part of this clip got awfully close to the pulleys and belt! Loved building these 383 and the 406 SB too!

That is one sweet sounding engine! Well done!

Beautiful work !! Love it

This guy is cool as hell! And the motor is too!

Love that sound!

That motor's so nice I could kiss it! You sure do know your stuff sir.

Awesome motor man, very impressive. Sounds like a beauty.

You know what this sweet engine needs. To be sheltered under the hood of my 87 GMC.

I just bought a 2017 M3 competition. It has a straight 6 with twin turbo. I built V8s as a teenager, and in my 20s. I had Mustangs and a '63 Fairlane, so I was working with 289s. There is simply nothing today that sounds as beautiful as a supercharged V8. As fun, and fast, as my BMW is, it's just not a raw horsepower V8. Nice job, sir.

Teach me master😎, great work and I enjoyed watching and listening

Awesome sound dude! sch 40 held up didn’t even need to go to cpvc love it ! Subscribed

Love that whining you surely know. GOTTA BLOWER IN THAT THING!!!

Well I love it and love drag racing so well done to you Sir

I'd also like to add. Amazing job on that beast. Thumbs up man

Awesome video guy! Love that sound!

@ 2:49 is where the action begins, If you want to hear about every component start from 0:00

To hell with the test box, build me an engine like that!!!

Motor sounds sweet! Great job!

ahh music to my ears.. my dream engine.. and you built it!

Very nice work, but I'm a bit curious as to why it has such a low RPM range . Is that the red line of 6,000 or just where it makes it's peak power ?

10:57 damn I love a good choppy cam idle!

This is awesome reminds me of what i used to see in hot rod magazine as a kid. Motor looks like it belongs to a life sized hotwheel car.

I built a stroked 350/383 ...10:1 compression...205 heads....pushed 425 house to 34 inch mud tires on a 78 GMC Jimmy while I was in the service. Loved the truck. She would go anywhere I pointed her.

Safety, SAFETY!! @ 12:07, the gentlemen would have known it if his loose shirt woulda got grabbed by the blower belt. Glad that did not happen! Nice motor, sounds awesome!

That’s a beautiful engine boss how much would something like that go for 👍🏼

Love the build..nice work!

When I was a kid there was a Chevelle in town with a 383 done up like this. That car turned heads!

Sounds BAD ASS man, haha, would be a handful in a small car like the Anglia!

Why not a thermostatically controlled radiator? If you keep pushing cold water into it it'll never run right. She's got to come up to operating temperature.

So nice. This would be like Christmas every weekend. Imagine this hanging out of a Torino and doing a leaserly sunday ride to town.

awesome job building a cool motor ! sounds great !

Looks like he's running pond water for coolant

Would love to hear this at 10:1 comp, a little overdriven, solid cam and fuel injection

that's a gorgeous engine. myself I have a 283 project that will eventually become a stroker. it's a work in process

SOUNDS!! AMAZING!!💯🏁💯🏁💯

That has got to be the calmest blower surge I’ve ever heard!

Engine runs nice and is efficient for the size. I question its inability to idle smoothly but you may have answered that when you richened the idle mixture and said richer jets were coming for the carbs.

Really nice !!! awesome sound !!

Dialed in sounds great

I will only buy this if I get the test box. I really want your test box. Please can I have that damn test box lol

How much does an engine like this cost would like too know Thanks

I built a 383 stroker naturally aspirated in high school. I put in in a 69 shortbed Chevy pickup… that engine was a beast. 533/555 with a 114° lobe center and a victor junior intake and 750 Holly carb. She would broil the tires at 20 mph…. Just punch it!

Beautiful video!

This gave me a semi

333 Jealous Souls What kind of Idiot would hate that sound its great

Man that's really cool 😎

Sounds beautiful

just stick this in my air boat

1:01 you forgot a critical spec, the Edelbrock valve covers! FFS...

cool set up

That is one beautiful motor

This engine is considered used now so we want the used engine prices. Very nice build sounds like a good ole stroker

how much are you selling these for,,

Beautiful love love love love the sound.

Chevy folk found out how great the 383 mopar is and made there own.

put that motor in granny old station wagon then race every one them kids take their cars away lol

symphony of cylinders - beautiful

She’s got the heart of a Detroit. Sounds beautiful!

I would pay 20k for the engine and stand test box let me know.

Every time I hear It rev. I see Obama’s legacy fading away faster and faster. Hahaha

Best notes ever not have to been written 👍🏽

Sounds Very Strong Sir Congratulations

Wow dude... That engine really BLOWS... I bet it SUCKS a lot when in the power band. Eeh? Get it? No?,,,, Okay... I'll just leave.

It's not a motor. ENGINE. Motors are electric

looks great and sounds awesome...

Nice job man , made my tv shake !

I've built 383 engines and if all it will turn is 6000 rpms....junk....real 383 chevy is 2 bolt large journal 400 crank and rods. no store bought garbage.