39MT Starter Rebuild

Рет қаралды 13,317

Mike Lauer

3 жыл бұрын

We decided to rebuild a 39MT and offer a rebuild kit at alternatorstarterrebuildkits....

Пікірлер: 30

@andresdariorevelorecalde4536 2 жыл бұрын

Thank you.

@user-do4ti9wb1s 2 жыл бұрын

When rebuilt kit is going to be available?

@ShakirAuto067 6 ай бұрын

Good working bro 😊❤😊

@glackaglack1534 2 жыл бұрын

Where can I get this exact kit please?

@gulabkhan4662 2 жыл бұрын

Good morning

@gulabkeerio1930 3 жыл бұрын

good mornlg

@jeancadet5862 Жыл бұрын

Where you located

@fouedhamdi1919 2 ай бұрын

Hi i think this is the same 39 MT delco remy so i have 3 question brother : 1. What is the total length of the starter cos i have a miss info about it ? 2. How much is the rated rotation speed interval in rpm of this starter ? 3. Can i use 2 of this starter model 9 KW to crank Caterpillar C18 heavy engine used in industrial system ? I hope you can help me bro and i will be very appreciated thanks in advance 🙏

@christopherdecker8171 2 жыл бұрын

Thank you for the video. I just swapped one out, and want to rebuild it for a spare. Have you ever put a new Delco one on, then had a rattle coming out of it ? It doesn't sound like it is hanging up, but has a random clang coming from in the starter area. Going to pull it back off and check it out Monday, but curious if these starters could have issues even new.

@christopherdecker8171 2 жыл бұрын

The rattle/clang can be heard just bumping the key, and then randomly when running the engine.

@shisci1 Жыл бұрын

@@christopherdecker8171 just installed mine. And wondering of the same

@chad1106 2 жыл бұрын

Part number for the solenoid

@jeancadet5862 Жыл бұрын

How much for the work

@alexmiron79 2 жыл бұрын

What is the amperage on your jump box and also do you have the part number of your rebuilt kit including everything? Thank you for your video

@rebuilderinabox 2 жыл бұрын

Kits available soon. 500 amp jump box.

@alexmiron79 2 жыл бұрын

@@rebuilderinabox thank you, let me know when they become available.

@sophiasocal68 2 жыл бұрын

My grounding lug snapped off and I'm having to replace the entire starter. I'm going to keep my old one and get a rebuild going. If I sent my starter out to be rebuilt, how much should I expect to spend on a good rebuild? Thanks!!

@DarkHorseZer0 2 жыл бұрын

You Can replace just ground stud if the rest of the internals are good. Full rebuild will cost around $250-$300 with OEM parts & labor.

@Louiscoro 3 жыл бұрын

I find on these the end plate and needle bearing on the drive shaft are bad. Causing dragging

@rebuilderinabox 3 жыл бұрын

Every single one. That's why the rebuild kit consists of a new endplate, new roller bearing and new solenoids.

@dade_countychiko5367 2 ай бұрын

What the starter it sounds like is spinning but not engaging is it better just to change the solenoid ?

@rebuilderinabox 2 ай бұрын

Could buy some time if that's what's wrong with it. (50-50 chance) If successful, another new solenoid would be necessary when the motor section expires. (1-6 months) normally.

@jimharper229 4 ай бұрын

I've searched all of KZfaq for a video on how to remove the pinion gear and shaft. It's hanging up and only slowly spins unless you pry it out with a screwdriver once. Then it will work one time. Just my luck the one thing I need to see, you skipped over.

@rebuilderinabox 4 ай бұрын

We mainly cover what 99% happens or is serviceable at home without special tools. Sounds like the shaft is bent. If its chucked in a lathe, it can be seen. The average guy (which is our mantra) doesn't have that tooling. But don't run out and get a lathe, it needs replaced anyway.