3D Lab Print B25 Mitchell Maiden Flight

Рет қаралды 20,150

4 жыл бұрын

This is the follow up video and maiden flight of the 3D Lab Print B25 Mitchell. Chris describes more build details and preparation for flying this printed RC aircraft.
Filmed at FLY-A-WAYS Club air field, North Plains Oregon.
Builder/Pilot: Chris
Camera: Dennis Wright
© 2020 by WBRC. All rights reserved. No part of this video may be reproduced or transmitted in any form or by any means, electronic or mechanical, without the written permission of the copyright holder.

Пікірлер: 38

@vrosi1963 4 жыл бұрын

Finally these designers seem to be heading in the right direction , with retracts and carbon wing rods , now they need to go redesign the older P38, serian to be larger and a JU88 or something not already that has been done to death. a FW190D-9 with retracts and flaps 1300mm of bigger

@rbrazil1000 4 жыл бұрын

Nice field. Nice plane

@WrightBrosRC 4 жыл бұрын

Thanks 👍

@saschafeldhaus899 2 жыл бұрын

Really nice

@WrightBrosRC 2 жыл бұрын

Thank you! Cheers!

@Mona8519 2 жыл бұрын

Like it! thx for sharing :)

@WrightBrosRC 2 жыл бұрын

Thank you! Cheers!

@martinschmidt5541 Жыл бұрын

Very nice

@WrightBrosRC Жыл бұрын

Thanks, this is my friend's aircraft. I got into printing my own aircraft from following his efforts. This DC6 is my first printed aircraft: kzfaq.info/get/bejne/jLldZa-W0L-pj2w.html

@christopherrichard369 4 жыл бұрын

** that steering arm works fine as it is, the video shows the very first turn the plane makes.

@WrightBrosRC 4 жыл бұрын

I agree, it seems to have a decent taxi radius.

@jthesniperarechiga3284 4 жыл бұрын

Nice I just got the files myself probably next week I will start, I just finished my F 86

@WrightBrosRC 4 жыл бұрын

Thx. Do you have a maiden flight of your F86?

@jthesniperarechiga3284 4 жыл бұрын

WrightBrosRC no we have a really heavy snow here in Chicago so probably next month

@WrightBrosRC 4 жыл бұрын

Oh, I understand. I lived in Waukegan for a couple years.

@diegonatanael9389 4 жыл бұрын

beautiful plane, did you use the 0.4 nozzle in the print or another?

@WrightBrosRC 4 жыл бұрын

Hello my friend, this is not one of my aircraft. However, the builder has supplied great detail on the RCGroups 3D Lab Print B25 thread. I follow his builds and flights to learn and share, but I have not printed my own yet. Thank you for watching.

@kjdjkaojg 3 жыл бұрын

That looks great! What color and brand of filament?

@WrightBrosRC 3 жыл бұрын

Thx Don! I'll check with Chris and get back to you. I think his complete build information is on the RCGroups 3D LabPrint thread.

@martinschmidt5541 Жыл бұрын

Did you scal up the measures of the original files or is it original ?

@WrightBrosRC Жыл бұрын

Reasonably sure it is original.

@JJ-jt4ji 2 жыл бұрын

i wonder if you did your prop nose the same way i did by jb welding a lock nut to a washer then glue washer to center? I could not find the right size nut.

@WrightBrosRC 2 жыл бұрын

No JB Weld on this one, but I have certainly used it for many things hobby related. Everyone should have a little JB Weld handy. 👍

@jthesniperarechiga3284 4 жыл бұрын

Huge favor by any chance can you share the links will you buy your electronics

@WrightBrosRC 4 жыл бұрын

The build information is on RCGroups. I am just a pilot friend of the builder. He posts his information as 'Xflyfun'. Just check the 3D lab print B25 thread. He is happy to answer all build questions in detail :)

@martinschmidt5541 Жыл бұрын

Did you choose LW-PLA or just PLA ?

@WrightBrosRC Жыл бұрын

Hello Martin, welcome! He printed this with standard PLA.

@andreapecci8737 4 жыл бұрын

ho iniziato a stamparlo anche io. Che motori hai istallato? che misura sono le eliche tre pala che ha montato? grazie

@WrightBrosRC 4 жыл бұрын

Ciao amico, questo aereo non è mio. Il mio amico ha documentato tutte le informazioni sulla sua build in gruppi RC. Grazie per la visione. Rimanga sicuro.