3D Printed Awesome Creation

3D Printed Awesome Creation - Candy Machine

Рет қаралды 9,092

Күн бұрын

Today's Awesome Creation is a candy machine by piraxchild. Very easy to print and a lot of fun to have.
Thingiverse:
www.thingiverse.com/thing:1453445
Myminifactory:
www.myminifactory.com/object/...
Micromake Delta
Amazon US: amzn.to/2lPwbnU
Aliexpress: s.click.aliexpress.com/e/rb6aYJI
Please consider using the following links to make your online purchases, it will not cost you anything extra but will go a long way to help support this channel.
Amazon US: www.amazon.com/?tag=3dm04-20
Amazon UK: www.amazon.co.uk/?tag=3dmano-21
Matterhackers: www.matterhackers.com?rcode=3...
Should you wish to support me, you can also do so via Patreon: / 3dmakernoob

Пікірлер: 67

@TheRedstonelabz1 7 жыл бұрын

doesn't want to get sued so covers the candy in duct tape. then shows the bottom which still shows the m&m logo :) fantastic.

@3DMakerNoob 7 жыл бұрын

haha, yeah, post production kerfuffle :P

@3DPrintingNerd 7 жыл бұрын

Oh... OH... I am SO going to print this! Well done!

@3DMakerNoob 7 жыл бұрын

Thanks Joel. absolutely wicked little machine

@hed420 7 жыл бұрын

You HAVE to do it on the G-Max! I want to see this thing able to dispense full sized candy bars, go big or go home.

@3DMakerNoob 7 жыл бұрын

you have a deal, actually i will do one better, i will go bigger than the G-Max, i will go Raise3D N2 Plus on it ;)

@foreman153 7 жыл бұрын

would love to see a video of you doing that, and my favorite candy is twix

@jesse-dg8yx 6 жыл бұрын

5:25 'I dont want to get sued so I covered everything' 5 seconds later 5:30 shows the logo on the bottom of the packet

@XYZAidan 7 жыл бұрын

Nice little project! Very well done, dude.

@3DMakerNoob 7 жыл бұрын

thank you :)

@izzyaya 7 жыл бұрын

Open a candy shop Joe!! Print lots and lots! Haha. This is one awesome print, my printer should ship by the end of the month according to prusa. Excited is an understatement!

@3DMakerNoob 7 жыл бұрын

haha i can only imagine :)

@3DPrintedAspie 7 жыл бұрын

Mmmmm Chocolate Covered 5'W&W my favourite too. ;) Great Video buddy thanks for Sharing.

@3DMakerNoob 7 жыл бұрын

3D Printed Aspie I could just devour that bag

@jacobrollins37 7 жыл бұрын

One of my favorite candies is Peanut M&M.

@nixternal 7 жыл бұрын

Nice! M&Ms ey? :D Before you opened the bag & dumped them in, saw the M&M logo on the bottom. I will have to save this in my todo list when my mk2 arrives.

@3DMakerNoob 7 жыл бұрын

Rich Johnson haha yeah saw it during editing, didn't have another bag to replace and reshoot lol

@choschiba 7 жыл бұрын

That is really awesome. I think you will have to print alot of them in the future. I would put the same mmmmmmm in there as you did. ;-)

@3DMakerNoob 7 жыл бұрын

haha, i will most definitely have to print more, they are now being ordered by friends and family lol

@casswms 7 жыл бұрын

I was very tickled watching you enjoy your candy machine. I am in the research stage and you have been very helpful thank you.

@3DMakerNoob 7 жыл бұрын

glad my gluttony served a purposes lol happy to help :0 and thank you

@patrick4485 7 жыл бұрын

really nice finish is done when you print the nice face to the build plate!

@3DMakerNoob 7 жыл бұрын

have to try it again. when i printed this i hadn't fully calibrated the delta yet :)

@patrick4485 7 жыл бұрын

when you want Im ready to help you.

@n20099 7 жыл бұрын

Nice desktop gadget . Now i need to get up and get me some chocolate 😊

@3DMakerNoob 7 жыл бұрын

Haha, seems to be happening a lot now :)

@hartk5353 7 жыл бұрын

just got a new subscriber..and i really want to print this now

@3DMakerNoob 7 жыл бұрын

awesome, you won't regret it i assure you... both the print and the subscription hehe

@larsdeboer3599 7 жыл бұрын

my favourite candy is definately "dove caremel chocolate bar"

@3DMakerNoob 7 жыл бұрын

hmmmm love dove!

@Spaghettikid 7 жыл бұрын

As an idea for this series, it would be useful if you could say or show how much filament was used or how much it weighs, as a rough idea for how much it could cost to print =]

@3DMakerNoob 7 жыл бұрын

Noted, will start making sure to include all details, such as settings, details on filaments etc :) thank you

@-Ashunar 7 жыл бұрын

Hello Joe, I'm very glad to have found your KZfaq channel. Yesterday, I then, inspired by you, bought the Wanhao Duplicator i3 Plus. I have seen a lot of movies in the past and have learned a lot, especially through yours. Thank you for that. I still have a small suggestion for your movies in the future. Make a comparison film by printing an object with different qualities. You could also make a movie by trying to print an object on your printers with maximum quality and at the fastest speed. Otherwise, keep going, I watch your movies with growing enthusiasm :)

@3DMakerNoob 7 жыл бұрын

Hey, thank you very much for the comments. I love the idea and will definitely include it in the near future :) glad you are enjoying the content so far

@daniellisy7161 7 жыл бұрын

Hi, I got the same in mind to print, would the biggest piece fit the Prusa? Btw good work so far on the videos :)

@3DMakerNoob 7 жыл бұрын

yes it would, the jar is around 14cm tall so it will fit very well. thank you :)

@arcanum70 7 жыл бұрын

My weekend print project. May have to make two of them as my girlfriend will probably take it to work with her.

@3DMakerNoob 7 жыл бұрын

lol, yeah mine was snagged from my office very quickly lol

@JUANJO27RDZ 7 жыл бұрын

Awesome print going to give this a try on my delta. Btw why did you changed the extruder plastic part with the orange one ??

@3DMakerNoob 7 жыл бұрын

i upgraded it to an original E3D V6 hotend so needed to change the effector mount completely

@JUANJO27RDZ 7 жыл бұрын

3D Maker Noob Nice, any noticeable improvement in prints? Or its advantage is only for printing a variety of filaments? Great videos btw

@3DMakerNoob 7 жыл бұрын

+JUANJO27RDZ many noticeable differences. Print quality improved drastically and all issues I had with temperature fluctuations completely disappeared. Also, cooling ducts are much better

@JUANJO27RDZ 7 жыл бұрын

3D Maker Noob Sounds great , a little expensive but gotta give it a try. Thanks alot

@pultz8255 6 жыл бұрын

"I covered everything just in case!" 5:23 he shows the bottom of the bag saying M&M xD gg wp 3DMN :D but nice vid as always! :D

@XMewtu1 7 жыл бұрын

I love your videos, great one, like every time!! :)

@3DMakerNoob 7 жыл бұрын

XMewtu1 thank you very much! :)

@rouxfan 7 жыл бұрын

Thanks for the video. BTW :"favorite candy" name revealed at 5:31.... :-)

@3DMakerNoob 7 жыл бұрын

haha yeah, my camouflage skills need heavy improvements lol

@Bowhuntrr 6 жыл бұрын

Is this safe? Is it safe to put candy in a 3D printed container? Is it food safe?

@killenmac 7 жыл бұрын

thx for the tip, I will print this, I will put candy in it, and I will show u.. xD

@3DMakerNoob 7 жыл бұрын

haha, awesome!

@tjnorton8421 7 жыл бұрын

says I covered everything. then flips bag to reveal m&m logo on bottom. that made me giggle.

@3DMakerNoob 7 жыл бұрын

lol, post production gaff lol

@Laserwurks 7 жыл бұрын

very nice. I noted your part not fitting because I have same problem when I added lettering to a object were perfect fit is needed. Using Cura and object I made in DesignSpark Mechanical this were print dead on the money. But when I added lettering to them for a Friend with MC " MatterHackers Matter control 1.7 the clearances expanded to near useless. Today I imported into MC both the labled object and the unlabled and moved then together and joined them and now printing to see if line clearances were corrected or not. www.bobber-fishing.com is what I was putting lettering on. I will let you know what happens.

@Stevo-fm7zu 7 жыл бұрын

Pineapple Lumps!

@Hyginx 7 жыл бұрын

You forgot the bottom. Lawsuit pending...

@3DMakerNoob 7 жыл бұрын

haha, i think i just instigated m&m's cravings with this video ;)

@minii8608 7 жыл бұрын

He forgot to cover the m & m logo on the bottom

@3DMakerNoob 7 жыл бұрын

Swavgav2002 maybe I left it on purpose ;) hehe

@clownmir7796 6 жыл бұрын

......You Um......... Forgot.... the bottom......... *slow clap*

@timsteenbruggen9216 7 жыл бұрын

Peanut m&m

@3DMakerNoob 7 жыл бұрын

nom nom nom :)

@rodentpete 7 жыл бұрын

Nice video - as a suggestion for this series how about trying some 'print in place' models to show how good design lets you make joints & axles in one go - here is a model that I enjoyed making - www.thingiverse.com/thing:208315

@3DMakerNoob 7 жыл бұрын

Peter Adlam awesome suggestion, will def cover that. Thank you so much