3D Printed Commander Deck Box for Magic the Gathering

Рет қаралды 8,061

Күн бұрын

In this video I go over designing, printing, and painting a deck box for my Edgar Markov commander deck.
Thingiverse Files:
www.thingiverse.com/thing:551...
Patreon:
/ tavaringames
0:00 - Intro
0:58 - Box Modelling
2:45 - Box Symbol
4:50 - 3D Printing
6:40 - Assembly and Cleanup
9:50 - Painting
11:14 - Finished Product

Пікірлер: 29

@ZoMbIEx23x Ай бұрын

Oh no, what's this?! A 3d printer entering my shopping cart?! Great video, very interesting and fun to watch.

@chadschlesinger 6 ай бұрын

Sanding right in the house is pretty badass!

@monkeydew92 7 ай бұрын

I just got the same printer and this video was excellent for helping me understand the process because I've never tried it before. Thanks

@bacurana 4 ай бұрын

A monoW commander player after my own heart. I salute you!

@L363NDK1LL3R Жыл бұрын

Nice print and great video! I'm looking into getting into personal 3d printing for myself (inspired by deck boxes just like yours)

@enriquealba5345 Жыл бұрын

Amazing box , im going to try printing it!

@pedrocruz1951 Жыл бұрын

if you could do some sort of catch mechanism so it stayed shut even if turned upside down, and lined the inside with something soft that would honestly be a very decent deck box.

@uzenaklobasa8701 Жыл бұрын

really nice work

@carrobin691 8 ай бұрын

Very Very impressive!!!! ☆☆☆☆☆

@rosswddg Жыл бұрын

To cure to the build plate the first few layers have increased exposure times. Then it slowly decreases the exposure time to the standard exposure time. This will make the top thicker. How did you print this without worrying about suction and the print sticking to the FEP? Did you have a drain hole I didn't see?

@TavarinProductions Жыл бұрын

I never had the thicker layers with my Mars printer at the base, even with the higher exposure times, and with the Saturn it goes well beyond the bottom high exposure layers, it's almost an inch into the piece that is wider. And no holes, it sticks to the plate much better than the film, so it stays on the baseplate just fine. I've printed 12 of these right on the baseplate and none of them detached.

@1bonebreaker1 4 ай бұрын

looks good... but i find it kinda wierd you went with a resin print and not a FDM print... designed my own deckbox that i printed on my prusha with a hole in the front so you couuld see the commander trough it and holes for small magnets...

@TavarinProductions 4 ай бұрын

I don't own an FDM printer.

@teamextreme86 Жыл бұрын

Subbed

@JarlTONIGBJ13 7 ай бұрын

sorry, what program did you use to create the model?

@TavarinProductions 7 ай бұрын

AutoDesk Fusion 360.

@istorm6887 27 күн бұрын

how is the durability like?

@sam.k542 Жыл бұрын

you could maybe fill the symbol with epoxy to avoid sanding it

@TavarinProductions Жыл бұрын

I'm only sanding the box because my printer is creating a wider base with visible layer lines. If you have your printer settings tuned correctly you shouldn't need to sand this print at all.

@pysokon7714 9 ай бұрын

I think the printing issues you are getting are from the way you are positioning the box to print. I guess you might have figured it out. It might create a suction effect like putting a glass upside down into water. Maybe that is stretching and ripping the bottom layers. The issue dissapears ones you are over the angled part. Not sure if useful, but i wanted to share my thoughts.

@TavarinProductions 9 ай бұрын

It happens to me with every print on the Saturn, regardless of the shape or contact area.

@pysokon7714 9 ай бұрын

@@TavarinProductions interesting. Have you tried different bottom layer exposure times?

@TavarinProductions 9 ай бұрын

@@pysokon7714 Yeah, tried a few different times, and it has a small effect, but even below the recommended base curing times for resins I still get a flair at the bottom of my prints.