No video

3D Printed Ghostbuster Logo [Time-lapse] Thingiverse STL File

  Рет қаралды 41,242

Filament Forge

Filament Forge

Күн бұрын

I was a BIG fan of Ghostbusters when I was a kid so when I found this on thingiverse I just had to print it.3D Printed on my wanhao d5s in PLA filament and scaled up to about 7inchs and it printed well. I hope this video helps you with your model.
I would like to thank Snorri for sharing this file you can download the STL file here
www.thingivers...
music
• Video
• Original Ghostbusters ...
I do not own this music.
Parapsychologists Peter Venkman, Raymond Stantz, and Egon Spengler are called to the New York Public Library to investigate recent paranormal activity. They encounter the ghost of a dead librarian but are frightened away when she transforms into a horrifying monster. After losing their jobs at Columbia University, the trio establish a paranormal investigation and elimination service known as "Ghostbusters". They develop high-tech equipment capable of capturing ghosts and open their business in a disused, run-down firehouse. Egon warns them never to cross the energy streams of their proton pack weapons, as this could cause a catastrophic explosion. They capture their first ghost, Slimer, at a hotel and deposit it in a specially built containment unit in the firehouse basement. As paranormal activity increases in New York City, they hire a fourth member, Winston Zeddemore, to cope with demand.
The Ghostbusters are retained by cellist Dana Barrett, whose apartment is haunted by a demonic spirit, Zuul, a demigod worshipped as a servant to Gozer the Gozerian, a Sumerian shape-shifting god of destruction.[a] Venkman takes a particular interest in the case, and competes with Dana's neighbor, accountant Louis Tully, for her affections. As the Ghostbusters investigate, Dana is demonically possessed by Zuul, which declares itself the "Gatekeeper", and Louis by a similar demon, Vinz Clortho, the "Keymaster". Both demons speak of the coming of the destructive Gozer and the release of the imprisoned ghosts, and the Ghostbusters take steps to keep the two apart.
Walter Peck (William Atherton), a lawyer representing the Environmental Protection Agency, has the Ghostbusters arrested for operating unlicensed waste handlers and orders their ghost containment system deactivated, causing an explosion that releases hundreds of ghosts. The ghosts wreak havoc throughout the city while Louis/Vinz advances toward Dana/Zuul's apartment. Consulting blueprints of Dana's apartment building, the Ghostbusters learn that mad doctor and cult leader Ivo Shandor, declaring humanity too sick to deserve existing after World War I, designed the building as a gateway to summon Gozer and bring about the end of the world.
The Ghostbusters are released from custody to combat the supernatural crisis. As they trudge up 22 flights of stairs in Dana's building, a romantic encounter between Zuul and Vinz Clortho opens the gate between dimensions and transforms them into supernatural hellhounds. After reaching the roof, the team is unable to prevent the arrival of Gozer, who appears in the form of a woman. Briefly subdued by the team, Gozer disappears, but her voice echoes that the "destructor" will follow, taking a form chosen by the team. Ray inadvertently recalls a beloved corporate mascot from his childhood-"something that could never, ever possibly destroy us"- and the destructor arrives in the form of a giant Stay Puft Marshmallow Man and attacks the city. The Ghostbusters cross their proton pack energy streams (reversing the particle flow) and fire them against Gozer's portal; the explosion destroys Stay Puft/Gozer and frees Dana and Louis. As thousands of New Yorkers wipe themselves free of marshmallow, the Ghostbusters are welcomed on the street as heroes.

Пікірлер: 55
@CastlesForEyes
@CastlesForEyes 2 жыл бұрын
I printed one of these two feet across. Just needs a little smoothing and painting before putting it up on the wall. Love it!
@WhiskyLima
@WhiskyLima 5 жыл бұрын
You sir are a very patient man. I think I would have given up after the first minute and a half of masking! Nice work!
@CritterHitters
@CritterHitters 5 жыл бұрын
Great job! I like this very much cos this is one of my favorite films (the one from 1984). Very cool, I will print this soon, for sure.
@baschz
@baschz 6 жыл бұрын
like the smiley slowly ghostly fading away from 0:45 :)
@aureliosempruno5428
@aureliosempruno5428 3 жыл бұрын
Very nice job, love your art, but sadly this video i had to watch it mute coz the music is so stressing, perhaps something less noisy for next videos
@Wayne_Nero
@Wayne_Nero 5 жыл бұрын
Great build
@mysteryunwrapping9518
@mysteryunwrapping9518 4 жыл бұрын
Amazing
@gnj8541
@gnj8541 6 жыл бұрын
Cool thing ever
@ghosthead84
@ghosthead84 7 жыл бұрын
Nice work!
@gloriaispache6020
@gloriaispache6020 6 жыл бұрын
What next you go to make 3D print of the loud house changers with 3d printer can you do now please.
@marciofilho9156
@marciofilho9156 5 жыл бұрын
I really like your job!! Just a question, It was 34 hours straight? Can't your print get overheated or something like that
@FilamentForge
@FilamentForge 5 жыл бұрын
yes 34 hours straight and no my printer wouldn't overheat cheers
@DEVILSFPV
@DEVILSFPV 5 жыл бұрын
I also do alot 3dprints and finishing, wondering if you were looking any ideas for a few videos?
@DEVILSFPV
@DEVILSFPV 5 жыл бұрын
Also I see you do alot of masking with tape, have you tried silly putty? It will be your friend for ever
@FilamentForge
@FilamentForge 5 жыл бұрын
No I haven't tried silly putty yet will have to give it a go what idea have you got for some videos?
@DEVILSFPV
@DEVILSFPV 5 жыл бұрын
Old school power ranger helmets, mega man helmet, Theres any thing from this guy (pay for stls) www.malix3design.com/?m=1 Infinity gauntlet Any thing avenger (you did the hulk one time)
@FilamentForge
@FilamentForge 5 жыл бұрын
there some good ideas thanks for sharing l have put them on my to do list cheers
@gettingoldstuff6462
@gettingoldstuff6462 7 жыл бұрын
Hi and thanks for the video . Helps a bit with the in betweens ...... Question for you . Possible to print in two pieces ? Ghost and stand ..... So i could print one red and one white ? Thanks and keep posrting . 👍😎
@FilamentForge
@FilamentForge 7 жыл бұрын
yes I didn't know until after I printed it that there's a split version here's the link www.thingiverse.com/thing:2257297
@GaryTabarJr
@GaryTabarJr 6 жыл бұрын
Do you remember where you got this version of the Ghostbusters music?
@FilamentForge
@FilamentForge 6 жыл бұрын
its on youtube just search for ghostbusters remix
@nowimnothing
@nowimnothing 7 жыл бұрын
nice work
@Bobster986
@Bobster986 6 жыл бұрын
Another awesome one. Can do you recall your printer settings? Thanks!
@FilamentForge
@FilamentForge 6 жыл бұрын
I use the default wanhaomaker slicer setting L/H .1mm 8% infill 50mms and minimal support hope this helps
@carlosvertiz6003
@carlosvertiz6003 5 жыл бұрын
Hi filament forge, can i make you a question? Wich printer do you use, i like your prints very much, and im kinf of new in this things of 3d printing,
@FilamentForge
@FilamentForge 5 жыл бұрын
wanhao d5s
@stephyweedy
@stephyweedy 4 жыл бұрын
nice work ... Again ;) .
@FilamentForge
@FilamentForge 4 жыл бұрын
Thanks pal might print a bigger one now that I have a bigger 3d printer
@stephyweedy
@stephyweedy 4 жыл бұрын
@@FilamentForge cool , ,so a lot of cool projects for the future, good luck Mate.Your vidéos gave me the motivation to buy a small 3d printer , so I have to say Thank you for that too , it comes from the hearts
@FilamentForge
@FilamentForge 4 жыл бұрын
@@stephyweedy that's nice to hear have fun printing 👍👍
@iRDaBrit
@iRDaBrit 5 жыл бұрын
0.2 layer height or 0.02? Seems like it would take weeks at a tenth of the layer height?
@FilamentForge
@FilamentForge 5 жыл бұрын
0.2 just a typing error
@ChunkyJo
@ChunkyJo 6 жыл бұрын
When you're masking, how precise are you on lines? I've found when trying to hug an edge it's rather inconsistent and I'm having a hard time keep straight lines.
@FilamentForge
@FilamentForge 6 жыл бұрын
when trying to hug a edge I like to go over the line and then use a very sharp knife and ruler to cut the masking tape to where it should be. hope this helps
@ChunkyJo
@ChunkyJo 6 жыл бұрын
A ruler! BLIMEY! How have I never thought of that? Thank you much! I'll give it a shot
@ashleyjuhalaajthefriendlyg1425
@ashleyjuhalaajthefriendlyg1425 3 жыл бұрын
I wish I had one
@xoutvr
@xoutvr 6 жыл бұрын
Hey filament... Can u do a wwe championship belt plate.. I wanna buy a machine but wanna see if the machine can print it. Thanks. Let me know
@FilamentForge
@FilamentForge 6 жыл бұрын
did a little search and there isn't any good stl file out there
@xoutvr
@xoutvr 6 жыл бұрын
Filament Forge 3dwarehouse.sketchup.com/model/d480cc6a-6b7e-49c9-a3ca-9bc6e50fe38e/WWE-Championship
@FilamentForge
@FilamentForge 6 жыл бұрын
Newfie4Life I had a look and it's a skp file so I'm not sure if it can be converted to a stl file
@xoutvr
@xoutvr 6 жыл бұрын
Filament Forge well thanks for checking... Would be cool if it can be done. I'm impressed with all your work.. Keep it up
@crearobotics8489
@crearobotics8489 6 жыл бұрын
Thats the propper order of sand paper? I mean sand it in that order?
@FilamentForge
@FilamentForge 6 жыл бұрын
course to fine I like to do 80 grit to 120 grit then maybe a primer wet sand
@ertlpercyproductions1557
@ertlpercyproductions1557 7 жыл бұрын
i like it
@jimallen4382
@jimallen4382 6 жыл бұрын
Hi all new too 3d printing was grade sand paper you using to do your prints
@FilamentForge
@FilamentForge 6 жыл бұрын
Jim Allen I like to use 80 grit to get rid of layer lines then 120 to smooth and after that high build primer then wet sanded with 800 grit this method gives a good finish
@jimallen4382
@jimallen4382 6 жыл бұрын
Filament Forge many thanks for the help
@yoamal1187
@yoamal1187 6 жыл бұрын
what 3D printer are you using and softwere
@FilamentForge
@FilamentForge 6 жыл бұрын
wanhao d5s and wanhaomaker slicer
@yoamal1187
@yoamal1187 6 жыл бұрын
Filament Forge thanks
@davidacosta3545
@davidacosta3545 4 жыл бұрын
Ghostbusters 3 afterlife was delayed to March 5th 2021 because of the coronavirus pandemic and you need to be patient please.
@danielwatson1388
@danielwatson1388 6 жыл бұрын
Awesome vid but the music was so famn annoying, could you've put on something else?!
@privateinformation9384
@privateinformation9384 5 жыл бұрын
If I were to slip you some Patreon money, would one of these show up on my doorstep 😉
@skyhacker6
@skyhacker6 5 жыл бұрын
0.02 mm are you sure ?????????? the most advanced 3D printer can get up to 50 um at most ! 34 hours for this ...... well buy an other printer ! I printed very very small gear (1.81mm !! height) and it took me 2.30h !!! at 0.05mm layer height !
@FilamentForge
@FilamentForge 5 жыл бұрын
its just a typing error was 0.20 at 40mms
3D Printed Juggernaut Figure
26:26
Filament Forge
Рет қаралды 171 М.
Turning a 3D Printed THE THING Bust into Concrete
40:57
Filament Forge
Рет қаралды 67 М.
ПОМОГЛА НАЗЫВАЕТСЯ😂
00:20
Chapitosiki
Рет қаралды 28 МЛН
OMG what happened??😳 filaretiki family✨ #social
01:00
Filaretiki
Рет қаралды 12 МЛН
Unveiling my winning secret to defeating Maxim!😎| Free Fire Official
00:14
Garena Free Fire Global
Рет қаралды 6 МЛН
3D Printed Kenner Firehouse Playset Doors
6:00
The Proton Pack Is Not A Toy
Рет қаралды 393
I saw a Ghost 👻 3D Printed Ghostbusters Slimer Replica Prop
6:16
In-Depth with the 3D-Printed GhostBusters Ghost Trap!
30:58
Adam Savage’s Tested
Рет қаралды 149 М.
Top 30 BEST 3D Prints of the MONTH | Recap April
28:12
MrKennedy | 3D Printing
Рет қаралды 20 М.
3D Printed Boba Fett Figure + 1000 SUBSCRIBER GIVEAWAY
30:33
Filament Forge
Рет қаралды 54 М.
3D Printing the Ghostbusters Logo
12:07
Cousin Ryan
Рет қаралды 375
3D Printed Aquaman / Diorama/ Giveaway!!
36:57
Filament Forge
Рет қаралды 53 М.
Amazing MECHANICAL 3D Prints | Cool Things to 3D Print
10:00
Marc3DP
Рет қаралды 787 М.