3D PRINTED - NEON LED LIGHT | DIY | CR-10SMART

3D PRINTED - NEON LED LIGHT | DIY | CR-10SMART | muiTDesigns

Рет қаралды 33,369

2 жыл бұрын

#3DPrinted, #NeonLight, #LEDLight, #CR10SMART
3D PRINTED - NEON LED LIGHT | DIY | muiTDesigns
Keep Safe, Be healthy and enjoy watching my videos.
Workflow:
• 3D modeling in 3Ds Max
• Rendered in Vray
• Post Production in Photoshop
• Video edited in After Effects and Filmora
BUY ME A COFFEE.. :)
DONATE CASH VIA PAYPAL: www.paypal.me/mernic
BTC Address: 3PRaz83vzFAhFqHYsRAJwwG6G8wKdNzrW2
Follow us on:
KZfaq Channels:
muiTDesigns:
/ @muitdesigns
Daily Life of MrsMernic:
/ @kristadianesm
TeamKDSM:
/ @teamkdsm653
website: www.muitdesigns.com/
Instagram:
/ muitdesigns
/ mernicmuit
/ mrsmernic
/ teamkdsm
Facebook:
/ muitdesigns
/ teamkdm

Пікірлер: 58

@UrbanCha0s 25 күн бұрын

Great work. Just an idea, could you not place the wiring inside the channel under the LED strips?

@BellyDExplorer 2 жыл бұрын

Tuara nigawas najud.. galing talaga.. gusto ko yan..pati Ang kulay

@suneetasandeep 12 күн бұрын

Idea is good, i tried some of my designs in 3d printing. The only issue is that the heat of neon led strip deforms the printed part very soon. Tried with petg and Abs both with same issue

@miguelguerra2355 11 ай бұрын

This is great and will be very useful as I plan my son's bedroom remodel. Thank you for sharing!

@muiTDesigns 11 ай бұрын

Thank You.. 🙏❤️ but try to use small wires and hide it under the LED light so it will be more depth the 3D printed and clean, not same what i did.. hahaha

@KristaDianeSM 2 жыл бұрын

Go lablaaaaab! 😍🥰😘

@mharzinphilturk08 2 жыл бұрын

Sana all jud naay talent nga ingon ani

@MCU_3883 Жыл бұрын

what is printer completion time

@aurion61 28 күн бұрын

What fonts did you used?

@adorabol4186 2 жыл бұрын

Harang .ako nasad sunod ani bay.. ok kaayo

@landohanysz8314 Жыл бұрын

awesome work where did you get those led strips or what are they called?

@muiTDesigns Жыл бұрын

Hi.. sorry for the late reply.. Thank You.. 🙏 I just bought it here in Qatar 12V neon LED Light (5m/roll)

@christiantardieu7561 Күн бұрын

What was your total print time?

@user-sq4rz2kb2h 3 ай бұрын

What is the font of this letter?

@c.g.03 5 ай бұрын

nice work. can you explain how to model the STL? i am struggling to extrude overlapping lines. salamat

@sebastianikeman Жыл бұрын

What did you use to stick the letters together? Just glue?

@muiTDesigns Жыл бұрын

Hi.. sorry for the late reply.. I just use UHU quickset transparent glue mix together with hardener and binder.. ☺️

@ClaudioMartins-yh7vv 10 ай бұрын

hello what kind os neon led did you use. u saw one and i just can cut 20 cm.

@muiTDesigns 7 ай бұрын

Hi it's a 12 volts neon flexible neon lights which can be cut every 1 inch..

@mossite 7 ай бұрын

What kind off PLA did you use? It looks kinda transparent.

@muiTDesigns 7 ай бұрын

Hi, i use PETG Filament.. Actually it's a transparent but since there is infill it looks weird. haha

@RadioactiveFilms1 Жыл бұрын

how did you go about making the gaps for the led? When I try in fusion 360 I cant edit the dimensions.

@peppernickelly Жыл бұрын

learning fusion 360 is a process lol after 6 hours of youtube you'll be able to edit any way you'd like

@muiTDesigns Жыл бұрын

hi.. sorry for the late reply.. I just use Autocad to plan all exact dimensions i need and extruded in Sketchup and export as stl for 3D printing..

@jershy6640 Жыл бұрын

when you create the sketch, you have to do sketch offsets and pick each of the lines you want to offset and I do one on one side and on e on the other side of the line half the thickness of the led strip you are using

@cybernet1154 Жыл бұрын

Type ur letters in then u need to extrude your letter up to desire amount I say u looking for 3mm up then u want to shell 🐚 each letter start at 2mm And repeat the steps to each letter with using all the same dimensions luck my guy

@the-matrix-has-you 9 ай бұрын

Hi, What is the Bed Material you are using looks cool plus it sticks good enough I guess

@muiTDesigns 7 ай бұрын

Hi it's PETG, i used 225-85 using the other side of the glass bed :)

@joserotte8742 7 ай бұрын

Una consulta cómo haces para que coincida el tamaño de las letras y donde debe hacerse el corte

@danielalozie9442 5 күн бұрын

Use a 6v power supply for a 12v neon the neon should light up but power/heating will be greatly reduced

@arfandy99 Жыл бұрын

Interesting work. What is the width of the led strip?

@muiTDesigns Жыл бұрын

Thank You..❤️ it’s about 5.4mm width x 5 meters per roll..

@trafoman2004 11 ай бұрын

You could have left a back recess to hide the wires. You used wires that were too thick.

@muiTDesigns 11 ай бұрын

Yes Sir☺️ I already update the details of this to hide the wires.. Thanks 🙏

@sooomanyactivities Жыл бұрын

What font is that

@muiTDesigns Жыл бұрын

Hi.. It’s Cartier Font by Graphix Line Studio but i adjust some of the letters to fit the LED when folded..

@mankanek97 Жыл бұрын

What kind of font did you use?

@muiTDesigns Жыл бұрын

Hi.. sorry for the late reply.. It’s Cartier Font by Graphix Line Studio but i adjust some of the letters to fit the LED when folded..

@someonenormal5579 4 ай бұрын

@@muiTDesigns how did you adjust the letters? Thanks! I want to make one for a friend in her handwriting, but i cant figure out how to make sure the letters will have hte same width with the led strip.

@muiTDesigns 4 ай бұрын

@@someonenormal5579 hello, i did it in autocad and adjust the leghth asper cut size of LED per inch so it will fit. Just don’t follow the wiring of this because it looks ugly.. hahaha

@CarpeDiemLiveSet 2 жыл бұрын

When you cut the light, you don’t check if your are cutting the led ? How do you check the connection between all the cuts ?

@muiTDesigns 2 жыл бұрын

Hi, this led light have a cutting marks every 1 inch and from that you can connect your wire. Perimeter of each letter should be planned so you will know how many inches it will be. Thanks

@CarpeDiemLiveSet 2 жыл бұрын

@@muiTDesigns tks for your feedback, my question is how do you plan them ? The tool you use ?

@muiTDesigns 2 жыл бұрын

@@CarpeDiemLiveSet actually i do it in Autocad so i can get the total perimeter of each letter and input led sizes to offset frame, next i make 3D model and then 3D Print. Everything was scaled 1:1. Thanks

@CarpeDiemLiveSet 2 жыл бұрын

@@muiTDesigns ah ok, can I ask you a favour ? I have led cable that i can cut every 2,5cm. Would you mind to create me a pdf to print of a text with a specific font ?

@kurtdoerfel7620 Жыл бұрын

@@muiTDesigns Did you trace over the text in 1 inch increments and make lines that way? How did you go about making sure your designs electronics would easily connect?

@97JoMiller 10 ай бұрын

any video showing how you designed the letters to begin with? That's what I'm interested in.

@muiTDesigns 7 ай бұрын

Hi sorry for the late reply, I use autocad by planning the length of the materials, then i use sketchup for extruding. :)

@97JoMiller 7 ай бұрын

no worries, I figured it out with Fusion 360@@muiTDesigns

@thegish1595 6 ай бұрын

@@97JoMiller Did you happen to find a good KZfaq video to do this that you could share or did you just do it on your own? I can't find one that is that great. I was looking to do it but I am brand new at Fusion 360. Thanks so much!

@97JoMiller 6 ай бұрын

I just kind of figured it out on my own. I wish I could give you better advice than that, but I'm not good at making videos or really sharing how I do things... I just kind of picked apart pieces of different videos to figure it out.@@thegish1595

@thegish1595 6 ай бұрын

@@97JoMiller Gotcha. Appreciate the reply back!

@love_sove_ 9 ай бұрын

Can you share this stl ?

@muiTDesigns 7 ай бұрын

Hi sorry for the late reply, this was in my old files I'm not recommending this design because the wires are shown at the back, I want to make another design in which the wires will be hidden inside but no time to do it yet.. :)