This is a video of my 3D printed R2-D2 project/experiment. The files are located here / mrbaddeley other links: astromech.net/ www.curiousmarc.com/r2-d2/mar...
Пікірлер: 141
@jameycoon7882 жыл бұрын
Love this video! Please keep them coming. Would love to see more.
@capeRCouple10 ай бұрын
my brother is actually doing this build and is taking him a very long time but this is like the best thing i have ever seen anyone do with a 3d printer and is part of the reason i purchased a printer.I will get around to doing this build someday.Nice job man.
@KevinFlynn19672 ай бұрын
Thank you, I appreciate the kind words!
@muzamilabbasi3 жыл бұрын
dude thats some great details and work in - hats off to you
@briancaldwell90383 жыл бұрын
Thanks for making a great video. Your R2 looks fantastic.
@Roy863 жыл бұрын
Thanks for all the detail. About to begin on my own build after completing a few of the minis.
@broemmler6 ай бұрын
Wow! What an amazing result Kevin. Congratulations!
@therealtiamat Жыл бұрын
Awesome make!!!!! Respect for such patience and engineering!!!
@GargoyleDrones Жыл бұрын
I love how simple your electronics set up is.
@juicycoding8192 жыл бұрын
Hey! this looks amazing! great job!
@TreyEversman Жыл бұрын
Absolutely incredible!!
@kreamailcom21462 жыл бұрын
Great, great, great work ! BRAVO !!!
@ronalddussart2 жыл бұрын
Im so super stoked to start this project just waiting to get my 3D printer
@highnotejazzer2 жыл бұрын
great work!
@ikbalkilinc33525 ай бұрын
Great work
@NoLimit372 жыл бұрын
Great job! Welcome to the team. :)
@loutorres0608 Жыл бұрын
Simply awesome. Salute
@tomgalvez85 Жыл бұрын
Great project sir! Projects like this are inspiring me to become an engineer when I graduate highschool next year!
@heiligcrt3 жыл бұрын
Kevin , great job on the video and an awesome job on R2, so cool makes me want to make one.
@zombiehunter11522 жыл бұрын
Who doesn’t want a R2D2
@therealtiamat19 күн бұрын
awesome build😍😍😍
@skyrim47132 жыл бұрын
I have the same problem with the belt,thanks for showing.
@Cosplayvicar2 жыл бұрын
So so good. You have done an amazing job. Love to see him fully finished and out.
@KevinFlynn1967 Жыл бұрын
Thank you so much! I would too like to see him finished. I relocated to a different state and once I get things wrapped up I hope to continue
@SP3VSSАй бұрын
great job!
@JMB019865 ай бұрын
This is amazing
@HobbyWorld_one2 жыл бұрын
This is really impressive, fantastic work. Love all of the electronics and sense of detail. I'm going to keep my eye out for any updates on this project :)
@KevinFlynn19672 жыл бұрын
Thank you very much! Sorry for not updating the channel, I recently moved.
@HobbyWorld_one2 жыл бұрын
@@KevinFlynn1967 No problem :) Looking forward to following your projects.
@PuroOsso012 жыл бұрын
This video was super helpful thanks!
@fsj197811 Жыл бұрын
Awesome, thanks for sharing!
@customsmithmfg43772 жыл бұрын
NJ!! love it.. love how well you worked this... top noch... building my first now.. thanks for the inspire.
@KevinFlynn19672 жыл бұрын
Thank you! I recently moved to Florida. That's one reason for a delay in an more videos, but I do appreciate all the comments!
@jimhinkle72452 жыл бұрын
VERY COOL!!!!! I’m actually wanting to do this!
@tonykelly21374 ай бұрын
Awesome job!
@KevinFlynn19672 ай бұрын
Thank you very much!
@johnalphacentauri2912 Жыл бұрын
It's absolutely phenomenal. Thank you for sharing this incredible project. Your way of describing the project build is very articulate and professional. Looking forward to more of your work. You're truly an inspiration.
@KevinFlynn1967 Жыл бұрын
Oh man thank you for your kind words!
@xxxxzorroxxxx2 жыл бұрын
So true I’m member. He the best. Members are all ways helpful.
@Wallace19711 Жыл бұрын
That's amazing!
@TomsProjects2 жыл бұрын
Excellent job! I'm currently building thr split file MK3 version. Watching your video reminds me of how much I have left to do but also how awesome it can be when I get to the point you're at. Keep up the great work!
@KevinFlynn19672 жыл бұрын
Thank you very much Tom!
@jamessnyder95062 жыл бұрын
That is one AWESOME build... I'm just starting out with 3D printing.. Wanting to do an R2D2 and C3PO.. Looks like I have a lot to learn. Thanks for the informative video
@zombiehunter11522 жыл бұрын
The biggest problem you have with a build like this is burn out but at certain stages you’ll get excited again when you put it together.
@patrickstaresina39022 жыл бұрын
I love this. Thanks!!!
@ray240512 жыл бұрын
Beautiful build! it really takes commitment to build one of these just with the printing time alone.
@KevinFlynn1967 Жыл бұрын
Thank you! Yes, you really do need to trust that your print can do 20hour prints!
@philruela Жыл бұрын
Bravo! Some day I will start this! Tremendous!!!
@KevinFlynn1967 Жыл бұрын
Thank you!
@fabienperso43083 жыл бұрын
Very good video, great job, i begin R2D2 from france
@GSimon8502 жыл бұрын
brilliant mate
@KevinFlynn19672 жыл бұрын
Thank you!
@Eternal-nr7gt Жыл бұрын
Amazing 👍
@mattburns5452 жыл бұрын
Incredible
@chrishechtl83302 жыл бұрын
That is so clean! Very nice printing. PLA+ wow. "I love to solder" That explains a lot! I hate it myself. There are a lot of mods on Thingiverse you can download to enhance things. Stuff like hiding a plug in port in one of the octogons, stuff for the speakers, those 2 buttons on the dome, there is mod to turn them into power and reset buttons, etc. I too went to the MIII drive, I finished my assembly of those a few months ago. Black undercoat: Yup. "Sanding the tops of the pie pieces at 45 to work:" Nice tip. "Split the power" Michael Baddeley mentioned that several times. Good call. Awesome job!
@zombiehunter11522 жыл бұрын
Dude how do you only have 99 subs, well now you have 100 I just subbed. Great work on the rd2d, I’m thinking about doing one myself.
@leightonwestbury922 жыл бұрын
I wish i had your insight, knowledge and abilities, to allow me to do something as phenomenal as this, absolutely awesome work, i'm thoroughly impressed
@zombiehunter11522 жыл бұрын
I was the same about 3d printing but once you print somethings, then you get used to it and start to get better. So stick with it 👍
@leightonwestbury922 жыл бұрын
@@zombiehunter1152 thankyou I appreciate the encouragement
@mattalki11 ай бұрын
That's pretty impressive, considering it's all 3D printed. R2 turned out amazing! Well done!
@KevinFlynn19672 ай бұрын
Thank you very much!
@loopvogel01 Жыл бұрын
Amazing, I really love it. Hope I can a smaller version on my Creality 3d V2
@dspartan0072 жыл бұрын
amazing
@park0rdie2 жыл бұрын
Amazing job Kev!! Wow.. can't put into word how much time and effort you put into this. Just result is worthed and amazing. I found your video cuz I search and was debating if I should build my own. Again.. great job and very inspiring what you accomplish. I'm so gonna build one now. 😁👍💯💯💯
@KevinFlynn19672 жыл бұрын
Thanks so much! I'm glad you liked the video! I was truly a "have a problem, figure out how to fix it" project.
@jeffreypajela17242 жыл бұрын
Just started this project, about half way done with the dome. Can't wait too we're you have gotten to!!! Great video and thanks for sharing this job well done 👏
@KevinFlynn1967 Жыл бұрын
Thanks dude!
@victoracevedo1078 Жыл бұрын
Phenomenal
@ImaginerImagines2 жыл бұрын
Well done. This look rough but looks like you got pretty far with it so far. It becomes its own hobby no doubt.
@KevinFlynn19672 жыл бұрын
Thank you! Absolutely it does become its own hobby, lol
@mujone2 жыл бұрын
Brother that is an awesome build. Congratulations! I'll buy that r2 off ya! Lol. I'm just in the beginning stage if building r2 using an old empty keg! Lol
@WalterAluasHeisenberg Жыл бұрын
Awesome.
@MrElectronica60norte11 ай бұрын
You are a god!!!! congratulations...I´m an Electronics Engineer from Mexico...and you work its really amazing!!!! Your hardware selection is the best...
@KevinFlynn19672 ай бұрын
Thank you! There are times when I got frustrated, but it's a great project in the end
@DinoBaldi Жыл бұрын
The Force flows very powerful in you !
@DeafMan19839 күн бұрын
Woohoo welcome to our eartg, R2 wow but i can't wait for reality with lightsabers and real spaceships of Star Wars
@emilflognoid15322 жыл бұрын
Getting ready to start mine, it’ll be a 2/3 scale but I’m building it the old fashioned way…
@kevinnelson662 жыл бұрын
I could use R2-D2 as my wingman to score with the ladies. Great stuff.
@carpingintheruff18182 жыл бұрын
brill video buddy, love the speaker mount you made, is there any chance of getting the stl for that from you, would help me out no end, keep them coming
@raultebelin505 Жыл бұрын
wow!
@whiterabbit1824 Жыл бұрын
God if I had the money I would buy a 3D printer and build this for sure!
@nathanwebb33718 ай бұрын
I’ve ordered a 3D printer, obvs I’ll start with small projects like rebel rank badges, then blasters, then helmets. But ultimately I’d like to build an R5.
@nathanwebb33717 ай бұрын
I lied, I went straight to building an R5.
@madmatts10544 ай бұрын
Same ..I'll start r5 soon ..got a r2 unit
@KevinFlynn19672 ай бұрын
lol, its quite the addiction!
@ottonain Жыл бұрын
My god!!! 😮❤❤
@elvisfreshly18572 жыл бұрын
Amazing work! Would you mind briefly sharing your painting process? What type of primer, specific colors, and clear coat? 🙏🏼
@KevinFlynn1967 Жыл бұрын
I just used spray cans from Home Depot / Lowes. I honestly had no luck with filler primer. The silver and blue are the Chrysler and Ford colors if I remember right. The clear was also of the shelf from HD or Lowes
@brianafortier2 жыл бұрын
Outstanding! I have been looking for a chassis to put together a gaming computer in. I am a total noob, but given time I think I could figure it out. Do you think the gears and track pads could handle an additional 15-20lbs? If not I could make it just a stationary case. But wow could you imagine that awesome rig with a gaming computer in it ?? Wow.
@KevinFlynn19672 жыл бұрын
It's pretty robust but that would be a better question for the designer, Mr Baddeley www.patreon.com/mrbaddeley
@angelhernandez9802 Жыл бұрын
Excelente trabajo. Pero no tengo impresora. Vendes las piezas sin pintar??
@andrewhiggins97322 жыл бұрын
Wow, amazing work. What 3d printer would you recommend?
@royaldarthvadersk30652 жыл бұрын
R2D2 💖💖💖💖
@delnajamusic2 жыл бұрын
That's the droid i'm looking for!...
@Gustav-Biernot2 жыл бұрын
Wow, that's so impressive. Where did you learn all about the mechanics?
@eliascruz9757 Жыл бұрын
Look like you have a good friend! R2 D2 the best friend in the universe of the planet 🌎 Super Cool
@KevinFlynn19672 ай бұрын
Thank you! It has been a lot of fun
@michaelangelopeters Жыл бұрын
It looks so good. Excellent job!! I may have missed it in your explanations of everything, but how much filament was used to print this project?
@KevinFlynn19672 ай бұрын
I wished I kept track of the filament I used. If I guessed it was between 20 - 30 rolls.
@QGMODS Жыл бұрын
absolutely amazing, do you sell those electronics as a kit?
@identitydude2 жыл бұрын
Impressive stuff, we've started on ours and I'm excited, just frustrated at how slow the printing is going. :) Two questions, where do I find the proper color codes for the painting? I don't want to try to match the blue by eye... and where do you get the Marcduino boards now?
@KevinFlynn19672 жыл бұрын
Hey Darryl Sorry for the delay in the answer. The color codes for the paint can be found on astromech. I can get the exact ones I used if you like. I ordered the Marcduino boards from oshpark I believe. You can also send the gerber files to a site and have them made. You will have to flash the arduino chips. marcaduino.com has all the info
@DEmma19722 жыл бұрын
Awesome. Apart from the time it took, how much money went into this?
@stevenjones38222 жыл бұрын
How could anyone not like this I want to do a 3d printer of r2 I at this moment don't have a 3d printer this is why I'm want one just to build a life size r2
@KevinFlynn19672 жыл бұрын
It's really been "what kind of personal touches can I add" project as well
@timopaso64442 жыл бұрын
Hi I also intend to use MarcDuino, which rc control do you use, and does it have cable for iphone? or the app has motion control ?
@tyylermcneace842 Жыл бұрын
Kevin would you be at all interested in doing another on commission?
@stevenjones2371 Жыл бұрын
i myself is a help with mr braddely ive got the dome all done printing wise and started on the body but cant find some of the parts like grabe arms and the doors that are on the body any help would be great
@matthewlastrapes81042 жыл бұрын
what kind of 3d printer is best for making something like that. and what material is R2 made out of
@Spazer454 Жыл бұрын
trying to the electronics for my dome is gonna be a nightmare as I have no experience in doing this, just 3d printing ahah. how did u learn to do the electronics
@KevinFlynn19672 ай бұрын
I have a degree in digital electronics, but if you take your time and put in the effort anyone can do this. I'm still learning everyday.
@RandomMiscShit2 жыл бұрын
Nice! I’m in process of researching to build one of these, and I also want to 3D print everything but the dome… so this is cool to see. What is your username on the forums?
@KevinFlynn1967 Жыл бұрын
I haven't been on Astromech too much, basically to get the electronic files.
@cpoco2 жыл бұрын
I got part way through mine and essentially killed my printer. I've got the dome, the body (which is a bit wonky due to poor print quality) and one and a half legs I think. I'm currently trying to build my own printer which has a bigger build area to help with completing the build... but I might end up redoing a lot and I'm even debating learning metal casting and trying to cast some/most/all in aluminium. I also have a plan for making a miniature projector (and using laminar flow technique to create a portable "screen") for the Leia message... but the way I do things this is probably still a few years off. Love the finish you've got on yours... looking really great! Makes me want my printer up and running so I can get back to tinkering.
@zombiehunter11522 жыл бұрын
You want a great printer get yourself a ender 3 max . I got one and I love it, if you make it all square as you put it together, then you get amazing prints off it.
@StvnLntz2 жыл бұрын
I really wanna start on this, what’s the average cost to build one ?
@aaronm18552 жыл бұрын
Hello, I am currently printing the 2nd main body frame, of the ring that is, I have come to the leg holes in the body, (part 9a,9b,9c) how do these play in the finished kit?
@zombiehunter11522 жыл бұрын
You normally have to print the shoulder parts and that fits into the body of the droid then you attach the legs to that.
@anic28206 ай бұрын
Can u turn this into a rotary fridge
@marionelfacanha1788 Жыл бұрын
Olá amigo, você vende o kit completo para montagem?.
@pedroblas100 Жыл бұрын
nice.. but any chnace you got the files for the geats connect to the dome
@pedroblas100 Жыл бұрын
a mean gears
@KevinFlynn19672 ай бұрын
They should all be provided by Mr Baddeley, www.patreon.com/mrbaddeley/posts
@argclipstwitch420Ай бұрын
Cuanto tiempo lleva para hacerlo?
@thanosprionas69194 ай бұрын
Could you please tell us 3d printer's specifications to build this model?
@KevinFlynn19672 ай бұрын
I primarily used a CR10S from Creality dimensions are 300x300x400mm. I also used a scratch built Prusa clone 200x200x250mm.
@TXRED20008 ай бұрын
do you have to split the dome files yourself? I only see the full dome print in mrdaddely files
@KevinFlynn19677 ай бұрын
He had plans for 6 piece dome plus 2 top pieces. I haven't been up to date on what he has lately.
@bearvassar66902 жыл бұрын
How much did it cost you to print and how much for equipment
@zombiehunter11522 жыл бұрын
You’ll be looking around 20 to 25 rolls of filament give or take and $25 each roll, electrics you can get the padwan 360 system which would cost you around $500 , you can buy a lights kit for about $200 , then you have motors and other little bits and pieces.
@horacechincer2 жыл бұрын
Hi Kevin. Which kind of PLA+ did you use?
@KevinFlynn19672 жыл бұрын
I shouldve took better notes, lol. I used primarily Hatchbox regular PLA (basically why I call this an experiment), but for some tougher parts I used eSun PLA+ and Raise3D Premium. I had great luck with all three. The Hatchbox PLA is so nice for PLA printing and the Raise3D was my favorite. I did try a number of other filaments but I think it really depends on your settings how much time you are willing to tweet them.
@teslar1 Жыл бұрын
Shame you never made a follow up on this
@KevinFlynn19672 ай бұрын
Working on some follow ups now that I've moved my life to Florida, Thank you for the comment and the inspiration to put more videos together
@MrDead19752 жыл бұрын
great job, just need to install the AI next lol
@JamesRoberts-hu5ftАй бұрын
I tried to search for the R2 files but could not locate them. Do you have the files that you used available? I so want to build R2. Wish I could find a C-3P0 as well
@KevinFlynn1967Ай бұрын
Hi James, the files are generously free by the creator, Mr Baddeley, on his site. www.patreon.com/mrbaddeley/about please consider joining his patreon if you do download and print his files. His work is amazing
@JamesRoberts-hu5ftАй бұрын
@@KevinFlynn1967 Thank you. Will be donating!
@themechbuilder6171 Жыл бұрын
17:44 not much going on there *literally a powerhouse*
@victormorales1790 Жыл бұрын
greetings I would like to know if you have a private email that you can send me since I would like to ask you a question. thank you