3D Printed RC Boat Vanguard Marine Sea Rescue

Рет қаралды 46,072

Жыл бұрын

Spec. Vanguard Marine Sea Rescue
Hull 50cm
ESC waterproof 40a
Motor 2215 3200kv
Battery 2S Lipo 850-1000mha
Tx Futaba 3pv
Rx 4ch Corona s-fhss
Servo MG 9g
Prop FT009
Drive Shaft FT011
STL file www.thingiverse.com/thing:546...
Please subscribe to our youtube channel / @mr.rc-creator

Пікірлер: 101

@Tyrant482 20 күн бұрын

This boat looks beautiful! Great work and thanks for sharing. Very nice and cool 😎👍🏻👍🏻👍🏻

@Mr.RC-Creator 20 күн бұрын

Thank you very much.!

@jacobdavidcunningham1440 Жыл бұрын

1:59 when the soldering fumes kick in

@helmuts5355 3 ай бұрын

Super gemacht *****

@Mr.RC-Creator 2 ай бұрын

Thanks.! 😊

@user-rg5jz2gv5e Жыл бұрын

Отличное творчество Скачал тоже модель

@julianorozco761 Жыл бұрын

Saludos y felicitaciones excelente proyecto , buen negocio fabricar piezas y tu propia lancha

@Mr.RC-Creator Жыл бұрын

@Julian Orozco Thank you so much!!😁

@AlwaysWrenchin 5 ай бұрын

Got the same printer. Thing works great

@Mr.RC-Creator 5 ай бұрын

Thanks a lot!😁

@ChampTruex Жыл бұрын

Dang you went all out on this unit heck yeah!!

@Mr.RC-Creator Жыл бұрын

I do it because I like.🙂

@ARCparamodels Жыл бұрын

On the video shows it in two sections, the file is one large boat)))

@tioleodiaz 6 ай бұрын

Excelente, saludos desde Chile

@Mr.RC-Creator 6 ай бұрын

Muchas gracias😁

@CozyRC Жыл бұрын

Nice build, I like all the details you put in! Also, good idea to put some carbon laminate at the seam. Cheers!

@Mr.RC-Creator Жыл бұрын

Thank you.!!!!

@philm6021 Жыл бұрын

Nice boat.

@Mr.RC-Creator Жыл бұрын

Thank you so much. 😊

@MuhMuh472 2 ай бұрын

Das Boot würde mir auch sehr gut gefallen. Was würde das den kosten wenn Du es nochmal machen würdest? Gruß Frank

@Mr.RC-Creator 2 ай бұрын

Hallo Frank Ich stehe nicht zum Verkauf, tut mir leid, vielen Dank für Ihr Interesse.🙂

@hugocarrasco5978 Жыл бұрын

Thank you so much.

@grizleeone1 Жыл бұрын

Awesome boat man!

@Mr.RC-Creator Жыл бұрын

Thanks!😊

@rickmichell7664 Жыл бұрын

In the thingiverse file comments you recommend scaling down the motors to fit the hull. what if I want to scale up the hull to fit the motors? what scale factor would you recommend? I am using Cura 5.0 and plan on powering with the outboards not an inboard like in the Video.

@Mr.RC-Creator Жыл бұрын

You have to arrange all the files together as a body and expand the body to fit the motors in your cura 5.0 program.

@poomwahboogins 8 ай бұрын

First, you did an amazing job on the design and on the build. The boat looks incredible. I'm curious, I see that you've said to sake the outboards to match the hull size. What percentage would they be scaled down to if I printed the hull in the size the files are already? I cant think of how to get the proportion right without trial and error and a lot of wasted prints.

@Mr.RC-Creator 8 ай бұрын

Yeah..!! You can print it now.

@poomwahboogins 8 ай бұрын

I know I can print it now, but what percentage is the hull compared to the motor ?@@Mr.RC-Creator

@Mr.RC-Creator 8 ай бұрын

@@poomwahboogins 65 percentage

@poomwahboogins 8 ай бұрын

Excellent. Thank you!

@claudiofiorentino5313 Жыл бұрын

6 un genio

@LuisMiguelGarciaTorres Жыл бұрын

please put the outboard on this. or better yet, make another one and add 2.

@Mr.RC-Creator Жыл бұрын

Thanks!

@patricks8214 Жыл бұрын

I like it an printed one. Files are good and there were no problems. Exept the first drive. Could you tell me your print resulutions? Thickness of the Hull and Infill? I think my boat is a little bit heavy.

@Mr.RC-Creator Жыл бұрын

@Patrick S resulutions 0.2 / Thickness 0.8-1.2 /Hull and Infill 0/ Wall 3 🙂 Reply

@MercuryMarineFrance Жыл бұрын

bravo

@Mr.RC-Creator Жыл бұрын

Thanks!!😁

@Nueng.11 Жыл бұрын

ติดตามพี่เลยครับ

@Mr.RC-Creator Жыл бұрын

ขอบคุณครับ ^ ^

@trendspoke1 Жыл бұрын

I really like it and would love to print it, but the print files sadly are totally out of dimensions to each other. Maybe the hull is correct, the chirs, crossbars are too small, the two engines are too big....You think there is a way to make the files again? Or would it be possible to get the CAD files and I would help out. Many Thanks

@Mr.RC-Creator Жыл бұрын

@trenspoke1 You can resize the file in the program to suit your needs before printing.

@gallienPerformanceandCoatings 11 ай бұрын

hello! i am about to print this boat, is the haul printed WITH support???????? the thingaverse file says no but in the video i see you added support to print the haul properly

@Mr.RC-Creator 11 ай бұрын

I don't remember but you can resize it.

@JusRc Жыл бұрын

Hey there downloaded the file for the boat. On the video shows it in two sections, the file is one large boat, could you upload the version as in the video in two sections? Also in the video the back is flat where the outboard mounts, can you also fix that on the thingverse file? Thanks!

@Mr.RC-Creator Жыл бұрын

Try again, I updated it.😁.

@JusRc Жыл бұрын

@@Mr.RC-Creator Thank you!!! One last question, how many inches is the boat in the video, the file defaults very small, for your size or 1/10 what MM what do I put for the X,Y,Z or just size up the largest by bed will do? Thanks Again!!

@Mr.RC-Creator Жыл бұрын

@@JusRc You can adjust the size as you want or 200%. 🙂

@JusRc Жыл бұрын

@@Mr.RC-Creator Thank you so much for all the responses, I have been looking for a good zodiac file, one last thing, for hull_2, could you make the back wall thicker? Plan on mounting a Kyosho Jackson outboard to it. Thank you Again!!

@Mr.RC-Creator Жыл бұрын

@@JusRcTry again hull 2.2.😁

@poomwahboogins 8 ай бұрын

do you have the files posted anywhere other than thingiverse? There seems to be a lot of stuff in the video that isn't in the files.

@Mr.RC-Creator 8 ай бұрын

Link.www.thingiverse.com/thing:5461389

@norsebavarian1941 Жыл бұрын

very cool, is this your own design?

@Mr.RC-Creator Жыл бұрын

Hi.Norse B Thanks yes i like it🙂

@rickmichell7664 Жыл бұрын

Do you have the STL files for the motor steering brackets?

@Mr.RC-Creator Жыл бұрын

Let me see.🙂

@user-id1cd7sz1w Жыл бұрын

Not bad

@Mr.RC-Creator Жыл бұрын

Thanks.

@richardbillhartz4537 Жыл бұрын

What was the print time on your b1?

@Mr.RC-Creator Жыл бұрын

It's been so long, I don't remember.😅

@angelo-xt4zb 10 ай бұрын

Why not having actual outboards

@Mr.RC-Creator 10 ай бұрын

I didn't really have an outboard at that time. Thanks for the recommendation.🙂

@WFamView Жыл бұрын

Hiya can you please post a link for where to buy the electronics? Thank you!!

@Mr.RC-Creator Жыл бұрын

You mean CR2032 Cell Battery Socket/ LED Light , right?

@Mr.RC-Creator Жыл бұрын

www.aliexpress.com/item/1005001419496742.html?spm=a2g0o.productlist.0.0.351b41102PXqaC&algo_pvid=a2d37203-b538-48e5-9be4-8b5bd2f81cc8&aem_p4p_detail=2022120918081511668016618030550001898032&algo_exp_id=a2d37203-b538-48e5-9be4-8b5bd2f81cc8-4&pdp_ext_f=%7B%22sku_id%22%3A%2212000016029151515%22%7D&pdp_npi=2%40dis%21THB%2142.39%2135.09%21%21%21%21%21%402103250d16706380959034765e85e7%2112000016029151515%21sea&curPageLogUid=lzCQSUvOtLvj&ad_pvid=2022120918081511668016618030550001898032_1&ad_pvid=2022120918081511668016618030550001898032_1 www.aliexpress.com/item/1005002059922896.html?spm=a2g0o.detail.1000014.2.7c2a17cc8xK4a5&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40050.281175.0&scm_id=1007.40050.281175.0&scm-url=1007.40050.281175.0&pvid=add8e975-2abe-4d48-b749-81bfc669ee66&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40050.281175.0,pvid:add8e975-2abe-4d48-b749-81bfc669ee66,tpp_buckets:668%232846%238115%232000&pdp_ext_f=%7B%22sku_id%22%3A%2212000018593537168%22%2C%22sceneId%22%3A%2230050%22%7D&pdp_npi=2%40dis%21THB%21242.57%2197.03%21%21%21%21%21%4021032fa616706386915265210e4c97%2112000018593537168%21rec

@rccustomscale4989 Жыл бұрын

Hello very good job! do you have the trailer .stl file to share? Thanks in advance!

@Mr.RC-Creator Жыл бұрын

Link e trailer .stl www.thingiverse.com/thing:3539109

@rccustomscale4989 Жыл бұрын

@@Mr.RC-Creator thanks bro !

@leplaisiraletatbrut1513 Жыл бұрын

bonjour avez vous les stl des supports moteur svp et de l homme merci

@user-tt3ui1xg8e Жыл бұрын

file is missing parts ?!

@richardbillhartz4537 Жыл бұрын

maybe 20 hrs or so?

@Mr.RC-Creator Жыл бұрын

Yes, maybe. 😁

@ARCparamodels Жыл бұрын

Please, share new stl)

@Mr.RC-Creator Жыл бұрын

Link www.thingiverse.com/thing:5461389

@ARCparamodels Жыл бұрын

@@Mr.RC-Creator Thanks! I didn`t see "Hulk"))) Could you explain difference between Hulk 2 and Hulk 2.2? What scale did you use for print? Thanks!!!

@hugocarrasco5978 Жыл бұрын

Are stl files available to share?

@Mr.RC-Creator Жыл бұрын

Link www.thingiverse.com/thing:5461389

@alexsh3018 Жыл бұрын

@@Mr.RC-Creator 404 page not found

@Mr.RC-Creator Жыл бұрын

@@alexsh3018 Try again.🙂

@alexsh3018 Жыл бұрын

@@Mr.RC-Creator It's OK now, thank you !

@leplaisiraletatbrut1513 Жыл бұрын

BONJOUR QUEL % POUR LE MOTEUR POUR LE BATEAU QUI EST A 100% SUR UNE ENDER3 MERCI

@Mr.RC-Creator Жыл бұрын

Vous pouvez ajuster la taille selon vos besoins. Diaporama avant impression🙂

@user-vc6zm4fh1s Жыл бұрын

ลำนี้ทำขายไหมครับ

@Mr.RC-Creator Жыл бұрын

ไม่ได้ทำขาย..ลองทำเล่นดู ..ครับบ

@hamidiabderrahmane6322 Жыл бұрын

Bonjour vous le vendez ?

@Mr.RC-Creator Жыл бұрын

Je ne vends pas, merci pour votre intérêt.😁

@loganthomas4636 Жыл бұрын

I need one how much fir scale build

@Mr.RC-Creator Жыл бұрын

I don't sell, I just like to play.🙂

@loganthomas4636 Жыл бұрын

@@Mr.RC-Creator OK fair enough it just it would be prefect behind my land rover

@Mr.RC-Creator Жыл бұрын

@@loganthomas4636 Thank you so much!!!😁

@athuynh824 Жыл бұрын

Can I buy it?

@Mr.RC-Creator Жыл бұрын

I don't sell, I just like to play.🙂

@athuynh824 Жыл бұрын

@@Mr.RC-Creator oh so sad, thank you!

@seorwulf1049 Жыл бұрын

@@Mr.RC-Creator 😢😥😔 you need to sell them, they're great!

@athuynh824 Жыл бұрын

@@Mr.RC-Creator can you tell me your gmail? I'm really excited about this product

@Mr.RC-Creator Жыл бұрын

@@athuynh824 Thanks. 😁