3D Printer, LEGO Mindstorms EV3

Рет қаралды 166,570

5 жыл бұрын

TechBricks Michał Ossowski presents:
LEGO Mindstorms EV3 3D printer. Accuracy of prints up to 0,5mm. Additional circuit with Arduino Uno for controlling heating block temperature. Ability of printing any object up to 12,8x,12,8x9cm.
techbricks.pl

Пікірлер: 212

@rabidflea1413 4 жыл бұрын

Owning a 3D printer myself this is very impressive and although the print is rough looking the fact it came off a printer made of legos is ridiculously cool. Kudos.

@tiantian329 4 жыл бұрын

Ik right?

@buzzygaming7667 4 жыл бұрын

dont worry its better than a 95 dollar 3d printer

@KEvronista 4 жыл бұрын

bricks that can make bricks. cue the robot apocalypse. KEvron

@honzapat 4 жыл бұрын

You know reprap, prusa mendel etc is designed to print itself. Good point though

@KEvronista 4 жыл бұрын

@@honzapat when the metal ones come for your prescription meds, don't say i didn't warn you. kzfaq.info/get/bejne/nZp3m8J6yLGchYE.html KEvron

@parasgtr1984 4 жыл бұрын

Oh duck I see Lego robots In my yard

@BanditOfBandwidth 3 жыл бұрын

Fourth Law of Robotics: A robot can't 3D print more robots.

@rosserobertolli 4 жыл бұрын

That is the most impressive and unimpressive Benchy I have ever seen at the same time!

@TechBricks 4 жыл бұрын

Thank you! I really appreciate such at point comment!

@catsnekos5002 4 жыл бұрын

Lol true

@analogicparadox 3 жыл бұрын

I've seen worse come out of enders and prusas

@archie6106 5 жыл бұрын

damn this is the most acurate lego 3d printer ive seen!! keep it up.

@TechBricks 4 жыл бұрын

thanks a lot!

@botalex4845 4 жыл бұрын

how many have you ever seen? you word it like you have seen tons.

@OWNEDGAMINGwasd 4 жыл бұрын

i love this video and the person who actually managed to make a 3d printer out of lego !!! you did something that most of us still strugle with . thank you

@TechBricks 4 жыл бұрын

thank you so much. I really appreciate that!

@lomgamer 4 жыл бұрын

It's really cool... but you think most of us thinks of lego 3D printers? :D

@FirstnameLastName-mr8lk 4 жыл бұрын

@@TechBricks Biggest question is how did you actually get the arduino to work with the ev3 computer thats my biggest question because making a 3d printer on its own is pretty easy but the connection between the 2 seems hard

@TechBricks 4 жыл бұрын

@@FirstnameLastName-mr8lk in that project Arduino circuit that controls only the temperature of print head is not connected to the ev3. However you can connect ev3 to Arduino simulating touch sensor or using I2C www.dexterindustries.com/howto/connecting-ev3-arduino/

@OWNEDGAMINGwasd 4 жыл бұрын

@@lomgamer i do ! And i still work on mine )))

@justgottasendit8825 4 жыл бұрын

That is insane, even with the print results being a bit rough. I’ve been printing for a while and even own a small printing service on the side and I’ve tried making a printer from scratch and failed badly. I really respect this build since I’m sure it wasn’t easy. Printing a “benchy the tugboat” on a lego 3D printer is just insane and I definitely think this video should get more credit cuz this is crazy! Nice job

@seanjackson6474 4 жыл бұрын

I was not expecting it to print a benchy that well damn. Great work!

@BeyondtheBrick 4 жыл бұрын

Great work! Can we share some of your videos on our Facebook page with credit to you? Please email us johnATbrickpodcast.com - thanks!

@TechBricks 4 жыл бұрын

Of course feel free to share it with link to my KZfaq channel 😀

@MarcAntoineBvl 4 жыл бұрын

Really impressed with the quality! Good job mate

@BrickThunder 4 жыл бұрын

Even though the ending came out a bit rough, that infill looking perfect!👌

@stevop80_45 4 жыл бұрын

The final print is a bit rough, but the fact it was printed with a lego machine makes it quite impressive! Nice work and thanks for sharing!

@jonahstricklin5476 4 жыл бұрын

This video deserves more attention! All you need is a cooling fan on the nozzle and you could even get legit decent quality!

@marvin.t4emblem185 4 жыл бұрын

literally the best use of a Mindstorm ive seen

@chrome3628 4 жыл бұрын

Rough surface but insane for being made out lego! Very well done dude

@AutTheWizard 4 жыл бұрын

Me: Mom can we get a 3D Printer? Mom: We already have a 3D Printer at home. 3D Printer at home: But in all seriousness this is so amazingly well done.

@rossyboi712 4 жыл бұрын

Holy shit dude. This is incredible! Absolutely genius!

@mak0t0san 2 жыл бұрын

Very neat! I think a part cooling fan would have helped, but the whole concept of a LEGO 3D printer is really neat. I specifically searched for "lego 3d printer", saw this video first and it did not disappoint.

@krzysztofmatuszek 5 жыл бұрын

Marvellous, mate! I feel sorry for the glass haha

@KSONO___ 4 жыл бұрын

Now make lego bricks with it

@wafflebuilds7812 5 жыл бұрын

Good to c u back

@whopperlover1772 4 жыл бұрын

This is so incredibly impressive!

@TechBricks 4 жыл бұрын

Thanks!

@suspense_comix3237 2 жыл бұрын

This is really impressive for a 3D printer made of LEGOS! Just add a Heated Printing Bed or a Part Cooling Fan and your print would probably come out better.

@user-fn5ip6tt9f 4 жыл бұрын

Well, it printed

@mrpepperonipizza3287 4 жыл бұрын

Absolutely incredible!!!!!

@CharlieHalvorsen Жыл бұрын

Building my own Lego 3d printer, it as good as this one but it’s getting there, I’m also using a 3d pen which makes things much harder. Nice build, defiantly want to see more!

@d0tted770 4 жыл бұрын

Best and most inspiring lego video ever

@TechBuild 4 жыл бұрын

Great project! Liked and subscribed in just 10 seconds.

@FrankStefan 5 жыл бұрын

Amazing dude!

@_Simon 4 жыл бұрын

Looks underextruded to me, but try gearing down the feeder some and then increasing the speed. Also if possible retraction would fix much of the stringing occurring.

@moonmatthew 4 жыл бұрын

WoW Amazing

@andrewmitchell5807 4 жыл бұрын

Beautiful

@fonzyduc1499 4 жыл бұрын

Good job!

@TheShoeJr 4 жыл бұрын

As Anakin Skywalker once said, "This is where the fun begins."

@LEGOKIDEngineeringmaster 2 жыл бұрын

nice filament color choice

@antoineddp 5 жыл бұрын

Awesome !

@user-lb1wb6mt6z 3 жыл бұрын

Amazing!

@letsgetto1millwithoutvids 4 жыл бұрын

How bad is the z wobble and how do you resolve it with Lego. Also pla doesn't need adhesive

@ul4264 4 жыл бұрын

Oh, very good job

@Lipatant 5 жыл бұрын

Time to print ? (cool creation)

@fart_m0nster_420 5 жыл бұрын

That is awesome

@paperfoldschannel607 Жыл бұрын

who would wake up one day and think, "I should make a lego 3d printer!" This man.

@tylersheehy3918 4 жыл бұрын

Impressive

@1234fishnet 5 жыл бұрын

Awesome

@tibike262 4 жыл бұрын

a simple nozle fan would make the print soooo much nicer

@liamsteadman6224 4 жыл бұрын

only costs you more than a normal 3d printer because its made of lego 😂

@ZubairHamed 4 жыл бұрын

but you could then print all the lego blocks and suddenly it becomes cheaper!

@ZubairHamed 4 жыл бұрын

cept for the EV3 block of c0urse :-o

@AccapOfficialChannel 5 жыл бұрын

Amazing 😱😱😱😱😱

@rheller_82 4 жыл бұрын

Could use some tuning, but wow that was cool.

@d.wetteskind 4 жыл бұрын

Could you upload a video, where you show the programming for the EV3? Because I build for a time a Mindstorms printer too, but I reassembled it, because I had no Idea how to send a G-Code inside the EV3-Brick. Nice Video 👌

@TechBricks 4 жыл бұрын

that's a good idea acctually. I'll think about it. For the code I've written gcode interpreter and I'm simply opening (previously saved on the ev3) txt file w g commands.

@Zgosc 4 жыл бұрын

Szacun

@firenado4295 4 жыл бұрын

the chattering and roughness on the print is probably caused by the chain as it is slightly stretchy causing it to not be exact enough for the fine details but still though it is very impressive i mean there are real printers that are junk compared to this

@colincampbell3679 4 жыл бұрын

Amazing how Lego has got so advanced now! All down to the invention of electronic Programming systems and advanced Lego parts. Shame that there was metal parts needed to make this a true 3D printer Model. But I sure this will not be so for long as the parts advance in Lego systems? I do think 3D printing if done really well has a real world place in making parts for the future! I see most if not all families owning a 3D printer in the near future as cost drop more! It be a nice back up for item making that be helpful if you can't get a small part you need.

@BjornGrylls 3 жыл бұрын

TechBricks: The printer is mostly made from LEGO, but the bed is covered with a piece of glass Benchy: Hold my beer

@robosolve2072 4 жыл бұрын

What was the maximum time for the Ev3 brick switched On on power cable.

@TechBricks 4 жыл бұрын

Approximately 5h

@Robber7 4 жыл бұрын

Now you can make LEGO using LEGO! Mind blown

@rafalmag 4 жыл бұрын

Does the application on EV3 parse the gcode or it executes commands from Arduino?

@TechBricks 4 жыл бұрын

EV3 parses the gcode. Arduino controlls temperature of the printing head. They're not connected.

@Zgosc 4 жыл бұрын

Ej to jest zarąbiste

@umutkaradag2340 4 жыл бұрын

With one 30 or 40mm fanduct this prints will be more beautiful

@mastergs2 4 жыл бұрын

It works, and the result is pretty good. OK.

@annagruszecka7853 4 жыл бұрын

Wow.....już wiem z czego jest drukarka 3D w pracy mamy😅

@EpicEnej 2 жыл бұрын

Peek lego, can make itself

@OKManNoOne 4 жыл бұрын

can you make more bricks with this 3d printer?

@TechBricks 4 жыл бұрын

i will try :)

@Rootics 4 жыл бұрын

Lol con el final 🤣 buen video.

@ameliabuns4058 4 жыл бұрын

when you don't wanna learn cad. (just a joke I hope it didn't come off as rude! its very impressive!) also your making tape alignment skills are amazing. I suck at alignment edit: wait you wrote your own firmware?

@TechBuild 4 жыл бұрын

Why don't you try replacing the chain with the rack and pinion gear system? That can help reduce backlash and improve the quality of the prints.

@chonapacaco9498 4 жыл бұрын

i like this one, its so "Legoey"

@AndrewTheRadarMan 5 ай бұрын

Time to pickup a textured PEI bedsheet for that bad boy!

@RomeDrori 4 жыл бұрын

Some ideas for improvement you might want to print a better fan shroud so you get better cooling and maybe tighten up the gears

@d.wetteskind 4 жыл бұрын

Good Idea, but the gears must be tighten up first

4 жыл бұрын

Any repository for the instructions to build the project?

@TechBricks 4 жыл бұрын

for commercial cooperation contact me via website techbricks.pl

@machinerin151 4 жыл бұрын

@@TechBricks Commercial cooperation? You're an arse. RepRap is under GPL, you can't sell its modifications for money. You can build and sell 3D printers themselves, but not the information.

@antekiwanowski5111 3 жыл бұрын

We arw waiting for new film!

@xiary8950 4 жыл бұрын

Damit how you do to combine arduino and ev3 a supersuper work

@tfbgaming1595 4 жыл бұрын

I have a 3d printer and I just need the code for the mother bourd if any one knows how to get it pls let me know

@dmitryfilin1584 4 жыл бұрын

marlinfw.org/meta/download/

@tfbgaming1595 4 жыл бұрын

@@dmitryfilin1584 thank you

@Shishwami 4 жыл бұрын

Świetne

@jmckenna2k10 4 жыл бұрын

What material was it printing with? It looked bubbly and gooey coming out of the hotend.

@TechBricks 4 жыл бұрын

It was PLA.

@thepixeleq402 4 жыл бұрын

Genialne

@TechBricks 4 жыл бұрын

Dzięki!

@domel1410 Жыл бұрын

hey how do you program such a 3d printer? how to upload stl file. for this lego mindstorms driver?

@4lTimich 4 жыл бұрын

How did you program this robot?

@TechBricks 4 жыл бұрын

in Java, lejOS

@zz9pla 4 жыл бұрын

Please share the plans!

@matstermind 3 жыл бұрын

Any chance we can get details on the code?

@daoyuzhang1648 3 жыл бұрын

Real question: can you print legos with this?

@josiah6035 3 жыл бұрын

what is the music you used called?

@11er33. 4 жыл бұрын

Damn that's cool. A little rough, but that's certainly a benchy and from legos no less

@NicksStuff 4 жыл бұрын

You should print Legos with it!

@Orc-icide 4 жыл бұрын

Impossible that it would be accurate enough to be repeatable. The quality is horrendous

@smylemusicproductions8897 4 жыл бұрын

But can It run crysis?

@virusrocker 2 жыл бұрын

can u make instuctions?

@ivanlozano2019 4 жыл бұрын

What's the song btw? Awesome job

@petercheung63 2 жыл бұрын

Hey, is there the design diagram i can download please?

@pdjames1729 4 жыл бұрын

Can it print usable Lego bricks? :D

@rossyboi712 4 жыл бұрын

I use the Lego to create the lego

@pdjames1729 4 жыл бұрын

@@rossyboi712 and print more Lego :)

@Graham.556 4 жыл бұрын

Yes

@jafjay6024 3 жыл бұрын

Tutorial pls?

@shado2074 4 жыл бұрын

What program do you use?

@TechBricks 4 жыл бұрын

Java, lejOS

@icedelectriced 4 жыл бұрын

*THATS DEEP* a 3D printer made out of legos to print more legos... *EDIT:* Yes i know kinda stole the comment from @KEvronista witch im giveing full credibility for the idea cuase sometimes theres a chance someone might have the same idea and thats ok right?