3D Printer UPGRADE that ACTUALLY GIVES the BEST PRINT QUALITY IMPROVEMENT
Рет қаралды 59,231
Күн бұрынGet professionally CNC'ed parts for your prototypes at PCBWay (5$ OFF for your first order) - pcbway.com/g/584K9t
⚙️ STEP + STL FILES OF THE PROJECT - bit.ly/CustomLK5HE
PLAYLIST: • In-depth 3D Printing a...
👉🏻 In this video I will talk and show 3D Printer UPGRADES that ACTUALLY MAKE the BIGGEST DIFFERENCE to the print quality. You can also check out my other testing videos.
🧡 Support my work at PATREON - / diyperspective
📋 RELATED ITEMS TO THE VIDEO (Affiliate)
- BTT E3EZ with TMC2209 and CB1 shrsl.com/42iwi
- CB1 heatsink shrsl.com/42iws
- ADXL 345 Accelerometer shrsl.com/42iwn
- Trianglelab DDB Extruder amzn.to/3LsfYBc or s.click.aliexpress.com/e/_DDG...
- Stepper Motor 20.5mm s.click.aliexpress.com/e/_DdP...
- Spider V1 Hotend 500C 250mm/s amzn.to/3Jd8Zth
- BLTouch amzn.to/42akxX6
- 5020 Blower fans s.click.aliexpress.com/e/_DkS...
- 4010 Blower fan s.click.aliexpress.com/e/_Ddz...
- KGT Linear Rails s.click.aliexpress.com/e/_DB1...
- Digital Microscope AD246S-M amzn.to/3UnpM1L
3D printers:
- Sovol SV06 Plus amzn.to/3Lmjbm8
- Longer LK5 Pro amzn.to/3chMvud (don't buy this one)
Filaments:
- ANYCUBIC PLA amzn.to/3W3MmwE
- filalab PLA www.filalab.lt/home/pla-1kg.html (non-aff)
📷 VIDEO SHOT ON:
- Fuji X-S10 amzn.to/3Zar9BW
📢 OTHER MENTIONED THINGS:
CLEARANCE vs PRELOADED Linear Rails • INTRO TO LINEAR GUIDES...
GJB Cube Print - www.printables.com/model/2931...
🕗 TIMESTAMPS:
00:00 - Intro
00:16 - Rigid frame
00:55 - Rails vs V-wheels
01:57 - PEI sheet vs Glass
02:22 - Bigger motor
03:13 - No compromise PRINT HEAD
05:03 - DDE vs Bowden
06:06 - Synced Dual Leadscrews
06:30 - POM Nuts
06:47 - KLIPPER and new motherboard
09:38 - Conclusion
🔗 YOU CAN FOLLOW ME:
Twitter: / diyperspective
Instagram: / diyperspective
#3dprinting #3dprinter #klipper
@gregornator 11 ай бұрын
i love your videos. thank you so much for creating this content!
@PrintingPerspective 11 ай бұрын
Glad you enjoy it!
@karipenttila2655 11 ай бұрын
You anti backlash nuts are installed upside down. The spring shall push to the direction of gravity😢
@PrintingPerspective 11 ай бұрын
Yeah, you are right. This happens when you just do things instead of thinking before doing them, haha! Good observation from your side :)
@2mD Жыл бұрын
i agree 100% ended up with exactly the same upgrades on my ender 3 pro :) ( just a different part cooling solution )
@salty_systems Жыл бұрын
Awesome 😊 I really like that you show the effects with the prints next to it.
@Ale-bj7nd 3 ай бұрын
Wow. I'm impressed you were able to print that tower.
@3DPrints247 Жыл бұрын
Cool video good to know what a good upgrade is for not that expensive!
@PrintingPerspective Жыл бұрын
Yup, Klipper especially with a direct drive extruder can do wonders :)
@umitbaba5690 Жыл бұрын
this was very helpful Thanks. Please more video about Klipper and Manta-CB1 boards
@TechieSewing Жыл бұрын
Good to know that the best upgrade is relatively cheap :) One day I'll pull that Orange pi out of its box (bought explicitly to try Klipper) and actually try it. I did get rid of bowden on my printer some time ago and the biggest noticeable difference is the ease of swapping filaments, and the teeny tiny waste at the end of the roll or a sample, like 12x less than on Bowden.
@PrintingPerspective Жыл бұрын
Yaa, Klipper's pressure advance with the direct drive extruder is insane. My only suggestion for trying Klipper is to have a spare printer to learn. Because most likely it will take a while and the printer will be inoperable for that time.
@TechieSewing Жыл бұрын
@@PrintingPerspective Having only one printer has stopped most upgrades I might want, that's true. Namely fully belted Z :) I have a Linux admin at home so we probably could defeat Klipper sooner than later, and I think you can dual boot it with regular Marlin based firmware too? It's just it prints _fine_ ;)
@marijuanas Жыл бұрын
I'm following you 😈Use that orange pi asap!🤠
@stefanguiton Жыл бұрын
Great videos as always! Would be interesting to see upgrades that eliminate Vertical fine artefacts (VFA)
@PrintingPerspective Жыл бұрын
Thanks. From my understanding and when inspecting a few prints under a microscope the VFA is caused by the X or Y-axis motor having inconsistent movement. So those vertical lines are when the motor moves slower causing more bulging in one segments and moving faster in the other causing thinner extrusion. That depends on the print speed as at different ones that inconsistent motion is lower and at others higher. Plus running motor current can be a factor. So to eliminate them we need higher quality stepper motors with lower rotation vibrations and find at what speeds they print the best. This is my understanding from other videos and limited testing of mine. :)
@salty_systems Жыл бұрын
Maybe: A higher extrusion Resolution up to a certain degree (i'm currently moving to an orbiter 2 since it has more steps per mm 😊) Filament dryer ... Anyway i would be happy to see the effects of it 😊
@voidiguess9145 2 ай бұрын
Love this, the Y-axis upgrade solved the issue with flat spots on the wheels (albeit a bit closed off and expensive). My only real issues with this are the fan comments and hotend and board choices. The Spider V1 is around $50 due to, well, Creality licensing and whatnot, and at that point I'd use a CHC, maybe even the pro version, or a dragonfly from Phaetus. Most fans only draw up to 0.1 amps, so 1 amp for the fan ports is plenty. Also, 5020 fans are hard to find, and usually they can't reach the airflow of 5015s (no idea what brand of 5015 you were using for your tests). There is absolutely no reason to use a $50 Manta E3EZ except for the additional $30 CB1 module that BTT forces you to use (thankfully this is the only board where a CB1 is mandatory). An SKRat would do all of this for $40 cheaper. Don't get me wrong, you said that this was a bad idea in financial terms, but I think it might be a good idea to look around a BIT more for video like this. Not hating either, this is a genuinely good video besides what I just mentioned. Will still be subbing.
@caseykreicar 5 ай бұрын
the absolute best upgrades for the Longer LK5 PRO on youtube really awesome video! (love the linear rails and extruder head design). I need to fix my extruder filament switch near the feed mechanism because the plastic wore down after 500hrs of printing(). I replaced part of it with all aluminum parts, but need to figure something out with mounting either the old filament (auto shut-off/pause for the filament sensor(switch)) or potentially designing a new housing. I also moved the original filament role holder and touchscreen to the very top of the unit instead of on the left side (makes for a smaller footprint on a table.) getting an lk5 pro for >$200 is totally worth it but the two weakest parts are these from what I've experienced was the filament switch and heatsink fan
@saldimarca3922 2 ай бұрын
I like the idea of replacing the stock hot end on the LK5 pro to an all metal hot end. I just cant find one anywhere that says it's compatible with the LK5 pro unless the one he has in the description is it. And how difficult is it to replace?
@diogocoelho496 8 ай бұрын
great upgrades you have done. i did the dual z belt single motor from kevinakasam for my ender 3 neo and a few other upgrades, also i intalled klipper on my printer and all is working fine just for the bed mesh seems acting weird, i do the screw tilt calculate and z offset before my bed mesh, when i start a print the profile is loaded but it's more smooth without any bed mesh, also my printer is matching 0.0 position bl touch offset is donne i don't know if you had problems with that or if you can help?
@MrStoffzor 4 ай бұрын
My cr-10 v2 with a H2V2S running Klipper is everything I want as an amateur/hobby printer enthusiast. Resonance compensation is a night and day difference and the DD extruder is so much easier to tune than the stock bowden setup
@manchandiyextreme8663 7 ай бұрын
This is awesome! I went for it and built it. However, I'm having a problems with finding the firmware for the new offset for the BLtouch. Do you happen to have the firmware for the original motherboard(LGT_KIT_V1.0)?
@DinklebergS55 3 ай бұрын
Hey thanks for the Project and the files! I purchased everything and im currently mounting everything together. Please can you tell me how to mount / connect the Hotend to something stable? How is it connected to the "frame"? i really dont see anything in the video and in the Assembly pictures. I would love it so much if you or someone else reply. Its really frustrating, because i have every parts and cant assemble it :(
@JoshFisher567 2 күн бұрын
If you want speed but a VZBot kit. Core XYZ Voron like machine on steroids Completely open source, all linear rails, water cooled motor and top of the hotend. Saw one on here so 2000mm/a at 75mm/s volumetric flow rate. Also did 200000mm/a travel from corner to corner If you print at its top speeds. The stepper motors get to above 80V. It's the only printer on hear were the camera really can't catch how fast it's moving. Tay and the Goliath hot end is Same insane. Same price as an X1 minus the 40 hour plus assembly and parts you have to print yourself.
@deucedeuce1572 Ай бұрын
I'm very surprised that 3D printers don't have an electronic DRO system, so they can always know their position and wouldn't able to fail in many of the ways that 3d printers fail and/or at-least would know when they fail and pause the print instead of destroying it. For example, I had two very big problems with my Ender 3 and a couple smaller problems that caused out of spec prints. The first was that my lead screw bushing was out of spec, so no matter how much I tightened it, it would not stop the lead screw from spinning over time, so my parts would print slightly too small, but at varying levels (sometimes even as bad as 10%)... so I had to replace it after a lot of frustration... and then, at the very same time I had my gantry getting crooked and stuck. For the most part the parts would just come out short, because I would level the bed to match the slightly crooked gantry that I didn't notice was crooked... but it eventually got so bad I could see the parts were very crooked. In both of these cases I think a simple DRO would have warned me of the problems and saved a lot of time and frustration. It kind of sucks that once the hotend leaves home, there is no way for the printer to have any idea if it's off track unless it's so far off track it hits one of the limit switches. If the z=axis gets stuck for example, it will just keep reprinting the same layer over and over again, which will most likely destroy the filament at the extruder motor and clog the hotend from being too hot with no flow for so long.
@kilianlindlbauer8277 Жыл бұрын
The bigtreetech skrat, a derivative of the skr3 for ratrig, has 3 amp fan ports with additional pwm control line and tachometer line. Ratrig sells their vcore printer now with a 4028 axial fan that draw up to nearly two amps. And if you have one fat chonky fan that needs more than one amp use a spare heater port. Basically all 5 driver boards have connections for 2 hotends like the manta e3 ez.
@PrintingPerspective Жыл бұрын
The official BTT manual says - "Fan Port Max. Current: 1A Continuous, 1.5A Instantaneous". I am not sure where you are getting these numbers.
@gabrielestrada1483 5 ай бұрын
What program are you usin to run printer by chance , my extruder is skipping any ideas
@matteolucacamilletti6091 4 ай бұрын
Where did you find the components you included in the project? (Fans, linear guides, aluminium profiles) thank you very much
@martinperezgarcia 4 ай бұрын
Expand the description of the video. He included all the links to the parts. Good luck!
@DavidNelson42 4 ай бұрын
Will that BTT tech board upgrade work on the Ender 3 S1?
@caboth340 6 ай бұрын
Did you design the synchronized dual lead screws?
@chrisbellevue 10 ай бұрын
Can this hotplate design for the rails be used with the stock dual blower setup? (I just purchased your hotbed design from PCBway) Thank you for your contribution! I'm planning to also do a dual z mod along with the x rails if possible.
@PrintingPerspective 10 ай бұрын
Yes. It doesn't change anything apart the Y endstop (also the z endstop height). But you can adjust the Y endstop as it will be placed along the right side of the middle 2040 extrusion.
@dtibor5903 9 ай бұрын
I have 2 small creality printers, and none of these issues are present. All of these issues can be solved just by finetuning everything and placing the printer on a shock absorbing suface (my printers are placed on a large tiles with 3cm soft PU foam). A bit modded marlin and a stock firmware. Most of the finetuning is done from the slicer
@BloodYFPV 5 ай бұрын
What is this fan duckt on miniature? Any stl?
@lucasseagull8282 11 күн бұрын
Why did you mark it as do not buy this one: longer lk 5 pro, whats the reason?
@wingit6275 11 ай бұрын
Great video. I also have a lk5 pro. It's all stock minus the raspberry pi4 running klipper. I'm wanting to do a direct drive extruder setup but one thing I'm unsure of is when looking at nema motors I see voltage of 4 , 12 ect. What voltage stepper would be correct or does it matter ?
@Sixpack0000473 Жыл бұрын
dude, please tell me how I can get those fan & extruder STL's! That "scorpion" look is badass
@PrintingPerspective Жыл бұрын
bit.ly/CustomLK5HE It is designed to be used with a custom metal plate part, but I also added a printable version of the plate. Just know that I don't recommend using the printed version as I am not sure how it will perform longevity-wise.
@ericjamieson8882 Жыл бұрын
Can you share your printer.cfg file for klipper by any chance? I'm getting ready to install the manta M5P and I have a .cfg file but I would like to check my pin assignments and make sure that I have the directions correct.
@PrintingPerspective Жыл бұрын
I could but I used the BTT E3EZ board and not the M5P. I doubt it will help you in any way.
@ericjamieson8882 Жыл бұрын
@DIY PERSPECTIVE thank you, I think I have it, I like checking before implementation. By the way, your y axis mod for the lk5 works like a charm!
@PrintingPerspective Жыл бұрын
Glad you liked it. Here you go, my current setup with E3EZ, nothing special - drive.google.com/drive/folders/1eGZ5DiIAf61gc2YBqbsCzCuTlkeJu1zS?usp=share_link
@ericjamieson8882 Жыл бұрын
@DIY PERSPECTIVE actually there are some things in this config that help me. I missed some of the macros and the safe position.
@cyanidebass6519 Жыл бұрын
thanks, but you seems to miss part of the point, the price point especially. You solely focus on the technical improvement, unrelated to the cost of each individual upgrade. Which ones gets the best improvement/cost ratio ? how much for the whole upgrade ? It seems pretty expensive, i would say at least 2 to 3 times the price point of the printer ... shouldn't then we just switch to an other printer from scratch ?
@PrintingPerspective Жыл бұрын
I didn't miss that because neither the thumbnail neither the title mentioned the cost aspect. Instead because you didn't watch the whole video you missed that I said that all these upgrades doesn't make any sense cost wise and you should just get properly designed 3d printer in the first place. Manufacturers can source parts in bulk so much cheaper, but the problem that the most of them don't know anything about designing 3d printers or are driven only by the profit aspect. :)
@jamieclarke321 Жыл бұрын
It’s very often better to buy a better machine than keep investing in a bed slinger
@chriseow Жыл бұрын
thanks for such an amazing video with print samples! will be considering some of the upgrades for my ender 3 v2. i have a few quick question - does linear rails need to be lubricated?
@PrintingPerspective Жыл бұрын
Yes. You clean the protective oil and use a grease like Mobilux EP 2.
@chriseow Жыл бұрын
@@PrintingPerspective ok thanks!
@fastslash25 Жыл бұрын
Hey what's the model for the cube at 5:30?
@PrintingPerspective Жыл бұрын
Here you go - www.printables.com/model/293137-gjb-test-cube-precision-testing
@JDdrizdog Жыл бұрын
Are all of these upgrades for the LK5 Pro?
@PrintingPerspective Жыл бұрын
Yes
@JDdrizdog Жыл бұрын
@@PrintingPerspective have you made a video on how to install these upgrades?
@PrintingPerspective Жыл бұрын
I don't really make "How To" videos, so no, sorry.
@NicksStuff 8 ай бұрын
I wonder what Klipper with the stock hardware would do
@drgibs347 4 ай бұрын
DDE? Daily Driven Exotics?
@RabbitTechie 11 ай бұрын
Anyone have a link to the rabbit model he uses? I like it but my google-foo doesn't seem to be up to the task lol
@PrintingPerspective 11 ай бұрын
www.printables.com/model/273458-bunny-low-poly-vase-mode
@visrupt 2 ай бұрын
almost a hundred gram difference between the pei and glass bed, that's a lot.
@Leviathan3DPrinting Жыл бұрын
Always use lube! Which btw mine came in the mail so I will put out a video on "THE" lubricant for 3D printers.
@PrintingPerspective Жыл бұрын
Can you be more specific? Are you talking about the lead screw? Rails?
@Leviathan3DPrinting Жыл бұрын
@@PrintingPerspective Not EP2 grease basically. I will be covering all types of linear motion components used in 3D printing(I kinda went down a rabbit hole on this one). For the long answer I will post my video as a response. If that is alright with you? Also I have a question. Do the POM nuts allow you to move the Z axis faster than a normal brass nut?
@PrintingPerspective Жыл бұрын
Sure, just know that youtube blocks links but I check those blocked comments once in a while. EP2 is just rating of pressure that lubricant can withstand as far as I know. On 3d printers loads are so low that it is not needed. But higher viscosity is nice on z axis rails. Less friction with pom nut, in theory should provide faster speeds, but it's still plain friction setup. Meaning higher impact on longevity with higher speeds.
@surecom12 11 күн бұрын
"people defend it" because anyone can 3d print now, and most people are idiots that's why...
@CB_agotchi Жыл бұрын
Please stop putting the background music so high. Cannot hear what you are saying!
@TechieSewing Жыл бұрын
Are you being sarcastic? There is no background music in this video.
@PrintingPerspective Жыл бұрын
The intro music? Are you listening to the video through headphones? Because that depends a lot. Please be more specific so I can better understand the problem you are having.
@christopherblair3667 Жыл бұрын
Hah! I get it. There is no background or "white noise" music. Would make the video a little more entertaining.
@CB_agotchi Жыл бұрын
@@PrintingPerspective I guess it's the intro I couldn't get through the first 20 or so seconds Watching on my phone. Pixel 6 pro
@CB_agotchi Жыл бұрын
@@TechieSewing no I'm being serious
@jonathanditren1680 11 ай бұрын
you basically contructed another printer, why then spend the money on this printer. i bought this printer for 350, and it have many issues, i definitely will go with Ender for my next one
PRINTING PERSPECTIVE
Рет қаралды 126 М.
Oscar's Funny World
Рет қаралды 230 МЛН
BluemonxterDIY
Рет қаралды 96 М.
Lost In Tech
Рет қаралды 187 М.
PRINTING PERSPECTIVE
Рет қаралды 157 М.
Spencer's Desk
Рет қаралды 4,4 М.