I have a bunch of FDM terrain I printed out of airship kit my trick is to cover them in regular basing texture. Not only it enhances the grin dark look but hides the printing lines very well. I can't stress how easy it is to apply some texture to those pieces. You can paint them as corrosion or grime it dosent even matter.
@iPaintSmallThings Жыл бұрын
I actually was planning on doing something like this for some Tatooine terrain I just printed-- possibly using textured spray paint. I'll have to test your method out, too!
@williamowens5144 Жыл бұрын
Nice trick on clipping the floor tiles in the slicer!
@iPaintSmallThings Жыл бұрын
haha I appreciate it!
@FelixTheAnimator Жыл бұрын
Atmospheric
@iPaintSmallThings Жыл бұрын
It's all about the atmosphere
@iPaintSmallThings Жыл бұрын
A few corrections/notes brought to my attention from comments! 1) I accidentally grabbed 1/4" hardwood instead of MDF at home depot-- so that's why it was hard to cut! (Blaqk Havok) 2) The stippling on the walls would have been way easier if I used a sponge instead of a brush! (Loosely Collected) Orchitect She-Hulk Interior: bit.ly/FDMSpaceHulk
@Matt-md5yt Жыл бұрын
sweet glad you did this one my friend
@iPaintSmallThings Жыл бұрын
Thanks! I appreciate it!
@641Viper10 ай бұрын
I know this video is a little old now but you could also use a soldering iron on pla to add bullet holes as well as laser burns and other effects to walls. Ive done this to some of my failed prints to make them more usable and give them a little more character.
@iPaintSmallThings10 ай бұрын
Oh wow that's a great idea! You could probably use it to make lil' etchings carved into the walls. I will try that!
@zakk143 Жыл бұрын
Absolutely awesome! Gonna strong-arm my friends with FDM printers to print something similar for me lol
@iPaintSmallThings Жыл бұрын
Thanks m8! haha it's definitely worth it.
@looselycollected7505 Жыл бұрын
Try using sponges or open cell foam instead of a brush to stipple paint on.
@looselycollected7505 Жыл бұрын
Whoops! I see that you switched to sponges later in the video.
@looselycollected7505 Жыл бұрын
And everything looks great. I need to square some stuff up on my FDM machines and get back to printing. Because this is exactly the sort of stuff I want to be able to print for my gaming table.
@iPaintSmallThings Жыл бұрын
@@looselycollected7505 haha I realized that way too late in the project.
@looselycollected7505 Жыл бұрын
I switch up or change my mind on thongs mid build all the time. No worries there. It's good to stay flexible on projects.
@iPaintSmallThings Жыл бұрын
@@looselycollected7505 haha it's the way it goes-- a lot of "well I should have done that different)
@John-zm3eq Жыл бұрын
Nice video. Instead of the painter's tape, you may have been able to make a couple of half height pockets out of cardboard or stiff paper that you could put the piece in, stiple, remove and put the next piece in.
@iPaintSmallThings Жыл бұрын
This is a really smart idea! Especially for the flat walls. Thanks!
@blaqkhavok4863 Жыл бұрын
you have some good advice and approach to the project. but a bit of clarification. that is not MDF.. it looks like Luan or 1/4" plywood. still. thumbs up !
@iPaintSmallThings Жыл бұрын
Oh wow-- I didn't even realize the wood grain on it. I must have grabbed it by accident 😅. That explains a lot. I appreciate it!
@maudepotvin8660 Жыл бұрын
I'm almost done printing a set in resin, im a bit worried about the magnet, 5x3mm don't fit, need to go with 4x2mm. I hope the result are half as good as yours !
@iPaintSmallThings Жыл бұрын
That would probably work, too-- as long as you super glue them in there they should work fine! I'm sure it will be fantastic!
@kutal35 Жыл бұрын
Graffiti on the walls for a coffee donation? That is too good of a deal to pass on
@iPaintSmallThings Жыл бұрын
haha not too bad if you ask me!
@natzo89 Жыл бұрын
Could you share your settings for cura? I tried mine but they don't fit when I try to clip them together.
@iPaintSmallThings Жыл бұрын
I print at 210° extruder, ~60° bed, .2mm layer height, and with a brim. Hopefully that helps! I find a brim is a really good way to keep things from warping, which may lead to things not fitting right.
@harveystephenson3547 Жыл бұрын
how long did it take you to print on your FDM printer?
@iPaintSmallThings Жыл бұрын
8 walls or 11 columns prints in about 24 hours. I could print 4 floor pieces at a time in about 7 hours-- I'd do one print in the morning, and then one at night. So over the course of a week you could have a decent amount printed out!
@elliotbull79246 ай бұрын
Do the parts need supports or not?
@iPaintSmallThings6 ай бұрын
They shouldn't-- but just make sure the print bed is super clean! I recently switched from 70% to 99% IPA and it made a huge difference. For these (printed before I switched to 99%), I printed with a brim to help it stick a little better.