3D Printing and Testing Another Coin Sorter on the Prusa i3 mk2
Рет қаралды 275,398
Күн бұрынCoin sorter machines are fun, and the last one I printed sucked. I found another on Thingiverse thanks to The JAT.MN, and it's Eugene Pentland's model. Let's give it a try on the Prusa i3 mk2 in Rapunzel silver PLA.
Yes, the thumbnail pays tribute to what everyone THOUGHT the other video was about :)
Get yourself a Prusa i3 mk2s / multi material / mk3 3d printer!
3d.pn/prusa
Eugene's video:
• Best 3D Printed US Coi...
The Coin Sorter V2 model on Thingiverse:
www.thingiverse.com/thing:2189166
The JAT.MN's video:
• Video
== Support the Channel via Patreon!
= 3d.pn/patreon
== Find Me Socially
= Twitter: / joeltelling
= Facebook: / 3dprintingnerd
= Instagram: / joeltelling
== Shop at the Affiliate Links Below to Help the Channel!
= Printed Solid: 3d.pn/printedsolid
= Matterhackers: 3d.pn/matterhackers
== Want some 3D Printing Nerd Swag?
= 3D Printing Nerd shirt! 3d.pn/shirt
= 3D Printing Nerd mug! 3d.pn/mug
Want to send me something for Fan Mail Friday?
attn: 3D Printing Nerd
509 NE 165th st
Shoreline, WA 98155
USA
Royalty Free Music by www.audiomicro.com/royalty-fre...
@aPyroDesign 7 жыл бұрын
Quit snorting coins Joeliplier. lol
@3DPrintingNerd 7 жыл бұрын
hahahahah FINE FINE OKAY
@ratoncolorado7227 7 жыл бұрын
A hand crank would be a good improvement
@3DPrintingNerd 7 жыл бұрын
Super good improvement. Maybe Eugene will see this.
@animejunkie10 7 жыл бұрын
Raton Colorado I have a design in my head but I don't have the software or 3d printer to do one T.T I want to make one so bad tho! this version is closer to the design I have in my head tho.
@ratoncolorado7227 7 жыл бұрын
I hear ya in the same boat pretty much.
@animejunkie10 7 жыл бұрын
I'm actually considering saving up for a 3d printer but the only one that looks even remotely nice and cost efficient is the prusa m3. but I know next to nothing about the right software and technologies. :/
@ratoncolorado7227 7 жыл бұрын
The software is quite easy to learn no harder than cad you can find all kinds of videos and tutorials online that are easy to learn, I on the other hand am saving up for a milling machine and a bench lathe, decided to get into gunsmithing, so for now 3d printers are on the back burner.
@jaythedogg 7 жыл бұрын
3D printing coin sorters, when done correctly, really makes cents.
@3DPrintingNerd 7 жыл бұрын
ooooohhhhh #dadjoke
@allyhardtke6216 7 жыл бұрын
haha very punny
@capmofthesea1275 7 жыл бұрын
allow me to use the shitty and overused response to puns: very punny!............ I know, i know, it just makes the person who says it seem like they have the humour of a 60 year old middle school teacher.
@victoriadorazio1444 7 жыл бұрын
Ally Hardtke Same
@withallduerespect8034 7 жыл бұрын
jaythedogg $$
@newfization 7 жыл бұрын
Needs a motor!
@3DPrintingNerd 7 жыл бұрын
I agree!
@Photograaf11 7 жыл бұрын
If you have a arduino and a servo.... it is easy to do that mod :P
@HiddenWindshield 7 жыл бұрын
Bah, a *real* 3D printer nerd would 3D print a motor. :P
@pumpuppthevolume 7 жыл бұрын
Photograaf11 u don't even need an arduino .....just a battery motor with a long shaft and a cog wheel and mounting it
@OopsieGoopsie 7 жыл бұрын
OR a 9 volt battery connected to a youtube video
@acerockman3520 7 жыл бұрын
At 4:09 it looked like you were dissatisfied with the coins not falling over, so you just knocked them over yourself
@3DPrintingNerd 7 жыл бұрын
STUPID COINS, I KNOCK YOU OVER!
@Celebfinewn 7 жыл бұрын
Someone should make one with a nose as the intake. Then it would be a Coin Snorter.
@3DPrintingNerd 7 жыл бұрын
Holy cow I LITERALLY just laughed out loud! For real!
@conormoore7840 7 жыл бұрын
I've watched so many of your videos and assumed you had at least half a million subscribers. You deserve much more! Keep up the good work
@3DPrintingNerd 7 жыл бұрын
Aww thank you! Nope, still under 100k!
@iamstickfigure 7 жыл бұрын
Well, I'm a fan of that video because I am most attracted to 3D prints that serve a purpose. I love the idea of something functional or mechanical being printed. So I would love to see more videos about functional 3D prints.
@calebhatler399 7 жыл бұрын
I am soooo glad this video came out. After watching the first video on the makerbot coin sorter, I printed this (I have a very large coin jar at home) and tested it out and realized it doesn't work. At all. Except for quarters. I was going to design my own, but this one is done much better than I could and I am glad you made a follow up about it. Hi Five
@3DPrintingNerd 7 жыл бұрын
Hey Caleb! This one should work better for you! #ReturnFive
@countrycowboy026 7 жыл бұрын
#coinsnorter! that would be awfully painful. Let's not and just say we did. Great video Joel, and great job to the dev for the quick redesign. It looks to function well.
@3DPrintingNerd 7 жыл бұрын
It DOES function well! Also, have a coin snorter story from when I was a kid. Remind me to tell you...
@tannert8361 7 жыл бұрын
Matthew Aaron Flinchbaugh OMG I WANT TO HEAR THIS
@countrycowboy026 7 жыл бұрын
I agree with +zambonietony I think we deserve a special video for this story. It cant start with the headline "In a world, a long time ago, In a Place where no one or thing should be..."
@WhiteIce2112 7 жыл бұрын
have you ever swallowed a quarter?
@timothymclean 7 жыл бұрын
Seriously, why would people be interested in a coin snorter?
@jmarkellos 7 жыл бұрын
That video is how I found your channel and I just happen to love 3d printing so win-win.
@3DPrintingNerd 7 жыл бұрын
Whoa, total win-win!
@JATMN 7 жыл бұрын
That came out great man! Can't wait to get home and check out how mine came out.
@3DPrintingNerd 7 жыл бұрын
It really did. Hurry up and get home to yours!
@hazrduspog2868 7 жыл бұрын
it's funny cause that's what broght me to your channel, and I've already seen almost 1/2 your videos
@3DPrintingNerd 7 жыл бұрын
NO WAY. You are awesome!
@hazrduspog2868 7 жыл бұрын
3D Printing Nerd NO you are awesome! ;P
@SimplyDudeFace 7 жыл бұрын
That may be the best coin SNORTER that I have ever seen. Well worth a visit to the front page.
@3DPrintingNerd 7 жыл бұрын
Hhahhahhaha thank you!
@dihop7690 7 жыл бұрын
Hey man you're cool keep doing what you do we need more people like you.
@3DPrintingNerd 7 жыл бұрын
Thank you so much! I will keep going!
@leoard12 7 жыл бұрын
Lol i actually discover your Chanel today like some minutes ago because of the other coin sorter video
@Markwhit7 7 жыл бұрын
I love your videos! I watch everyone! Keep it up
@3DPrintingNerd 7 жыл бұрын
Thank you, Mark!
@JeanPhilippeMARQUE 7 жыл бұрын
Nice job! Now you need to make some fun coin with a coin spinner or machine Coin Vortex!!
@3DPrintingNerd 7 жыл бұрын
a coin vortex! yes!
@RobertJohnson-je6tx 5 жыл бұрын
Excellent design, really like it. Only suggestion, possibly make the hopper a little larger in order to hold more coins. Great design and good print.
@EugenePentland 7 жыл бұрын
Hey great video! I thought the spinner getting stuck had been fixed. The first one I printed got stuck because I took it off the build plate while it was still hot and it ended up getting bent, I might make some minor notifications to prevent this. Anyways thank you for making this video! It has really helped out my channel, almost doubling my subscribers
@VahurAasakyla 7 жыл бұрын
I love that hairy lion on your table! Please let it stay there for all your next videos. :)
@3DPrintingNerd 7 жыл бұрын
Yeah? Sure! I'll keep it there as long as I can!
@VahurAasakyla 7 жыл бұрын
Thanks! :D
7 жыл бұрын
awesome job
@3DPrintingNerd 7 жыл бұрын
Thank you!
@FirstNameLastName-rr1jr 7 жыл бұрын
that video is actually the way I found your channel.
@analog_wav 7 жыл бұрын
this video was a great way to start my day it was so much fun
@3DPrintingNerd 7 жыл бұрын
Glad I could help kick off your day on a positive!
@analog_wav 7 жыл бұрын
3D Printing Nerd aww, thanks :)
@MrCarrellScience 7 жыл бұрын
Just ordered my Anet A8!
@3DPrintingNerd 7 жыл бұрын
That's rad, soon you will be printing all the things!
@randomgirll3123 7 жыл бұрын
As someone who collects and saves up change for splurge purchasing a coin sorter like that would actually be an amazing thing to have. XD Especially if they tubes only held enough to be put into a coin sleeve.
@PhilWaud 7 жыл бұрын
High Five Joel! i don't know what it was about the video either but i really enjoyed it and personally prefer it to "mailbags", "Q&As", etc that seem to dominate a lot of channels. oh, another reason, I don't feel quite so bad about how untidy my office is now! :-)
@makeshaper6259 7 жыл бұрын
Love the way the lion turned out! Did you do any additional styling on it? Congrats on the success of the 1st coin sorter video!
@3DPrintingNerd 7 жыл бұрын
No additional styling!
@berntapple 7 жыл бұрын
Seems like a reliable funtional unit though. Nice print!
@3DPrintingNerd 7 жыл бұрын
Thank you!
@MauricioFernandezF 7 жыл бұрын
I like the way you snort coins :)
@3DPrintingNerd 7 жыл бұрын
It's truly a gift.
@vividvoidgirl2760 7 жыл бұрын
FWIW - The first coin sorting video appeared mixed in with the other 3D printing channels I watch, and I clicked it because the model was both a practical idea (well, kinda) to use at home, and a good way to look into a basic mechanism loads of machines use. I'd bet videos showcasing models like that would tend to have wider appeal than videos showing stuff that can be printed just because it's cool. That said, I'm sure there's plenty of us that like both types!
@3DPrintingNerd 7 жыл бұрын
I think you're right - I would LOVE to show off more mechanical prints!
@tristragyopsie5464 7 жыл бұрын
I don't think it's the fact that it's a coin sorter, but the fact that it is a practical model. lots of stuff is on how to use or adjust various 3D printers and that is great, but most everything else is novelties and nicknacks. they can do SO MUCH MORE. loke be the base for cold cast parts or positives for molds, but what most people probably want are useful tools and gadgets. things that show this could be an improvement to any home by solving problems. this may sound harsh, but I have a printer myself and I have a lot of nicknacks and stuff I could ((Do)) make but the things that I'm really proud of are the more technically complex things or things that solve a problem or fill a need. they just don't come around all that much.
@mikegigabyte 7 жыл бұрын
funnel tip looks like a good improvement
@3DPrintingNerd 7 жыл бұрын
I thought so - way easier to mass add coins.
@dreamdesignmake3416 7 жыл бұрын
Hey Joel. Just wanted to say thanks for the inspiration, Just finished building my first 3D printer, an Anet A8!! Im also doing my first youtube video on it should have it finished soon then wait for it to upload on my crappy australian internet lol. Hope your having a great day...or night.
@3DPrintingNerd 7 жыл бұрын
That's great to hear! Make sure you tag me if you post a print so I can see it!
@dreamdesignmake3416 7 жыл бұрын
I have no idea how to do that but ill work it out :D
@dreamdesignmake3416 7 жыл бұрын
Just put my video live, I think i tagged you in it correctly, if you cant find it tell me and ill send you a link. Would be great to see what you think I can do to improve.
@kunalchakraborty3037 7 жыл бұрын
direction specific model . If we set the largest tube first during rotation then all coins will go into that . I mean the starting point and direction of spin must be specified in thus model .
@niclasvonplato6877 7 жыл бұрын
pls someyone make an € version (like if you agree)
@3DPrintingNerd 7 жыл бұрын
I liked it.
@ligaskirbauska8652 6 жыл бұрын
Niclas vonplato And £ For UK
@juliusfan1843 5 жыл бұрын
I wanted to write that too
@sadduck1737 5 жыл бұрын
But what about a Bitcoin sorter?
@BallistX 5 жыл бұрын
Also a CAD$ version
@tommullinerart 7 жыл бұрын
That's great. Now you need to add a small motor or winding handle!
@3DPrintingNerd 7 жыл бұрын
I would LOVE a motor for this!
@357Booty 7 жыл бұрын
Looks like the new model should work better simply because it doesn't rely on the coins rolling down a chute. I can't wait to print it!
@3DPrintingNerd 7 жыл бұрын
I agree! Hurry up and print it and show me!
@haydenc2742 7 жыл бұрын
Very cool! Positive feedback from the community...gets stuff done! Going to try to print one in ABS, I usually have to scale it 1.012 in Cura to get exact specs due to shrinkage, but it comes out great... Thanks Joel...a coin sorter is going to be the new benchy or baby groot...haha :P
@3DPrintingNerd 7 жыл бұрын
Thanks as always for watching, Brian!
@sgill6 7 жыл бұрын
Nathan really enjoyed this video. He says thanks John!
@3DPrintingNerd 7 жыл бұрын
Awww tell Nathan I send hugs and a high five
@fandomfloof9832 7 жыл бұрын
I watch you and markiplier and I lost it when you said Mark yelled at fish but he hates the ocean so u can't blame him
@evasivefennec8766 7 жыл бұрын
when senpai talks about your markiplier conspiracy. (Loving your channel more and more!!! High five!!)
@3DPrintingNerd 7 жыл бұрын
Aww thank you! hahaha, SENPAI!
@ledgen95 6 жыл бұрын
I found a coin sorter that was almost identical to that. I had way to many problems with it to the pieces not fitting together to them just breaking, I don't know if its because of my print settings or printer but i tried multiple times and finally got it together... not without some layer separation and splitting
@levihortman8163 7 жыл бұрын
thats pretty cool
@jasonmurawski126 7 жыл бұрын
Sirius:are you serious James:no your Sirius
@notimportant9360 7 жыл бұрын
It was trending because it was such a cool design!!
@OopsieGoopsie 7 жыл бұрын
Motor+Gear+Battery+Hot glue+That coin sorter= FUCKING AUTO COOL SORTER+sandpaper= GOOD AWESOME FUCKING AUTO COOL SORTER
@byronbailey500 7 жыл бұрын
Could you possible Design and/or 3D print a Trammel of Archimedes? It's beautifully pointless! Also I'm starting to save up for my first 3D printer! I've subscribed and I'm watching a ton of your videos! They're really great and I love how you communicate with your audience. College can be really stressful so it's awesome to get back to my dorm and watch these videos.
@marymarshall3892 4 жыл бұрын
it is so much better than the old one
@spikeydapikey1483 7 жыл бұрын
Nice snoozle on the snorter :p
@clarasimpson9463 7 жыл бұрын
"well, that might be true, but I don't yell at fish" not sure why this is so amusing to me
@KeyboardSerpent 7 жыл бұрын
I'd love to see a design made to cope with all the different coins you find in the UK. I can only imagine it would be significantly larger than that small one XD
@Hana.Behl-Lecter 7 жыл бұрын
Oh god markipliers fear of the ocean/subnautica playthroughs have even made it here 😂 that's amazing
@nykachuu 7 жыл бұрын
I don't know why but if i get my 3d printer im going to print one of them, when i was a little kid i always wanted that moneybox in which it spirals around and sorts and counts you money. Now I'm super intrigued by coin sorters
@3DPrintingNerd 7 жыл бұрын
Print them! yes! Hurry up and get that printer.
@nykachuu 7 жыл бұрын
I wish but I'll have to wait to my birthday, I'm going for the good printer right away: the prusa i3 mk2, I could buy a small printer with no heated bed right now, but that won't make me very happy in the long run, but I'm super glad you and Angus inspired me, I'm already designing things in fusion!
@marcuschute7392 7 жыл бұрын
you should 3d print larger containers for the sorter and attach a motor so you can dump all your coins in and have them sorted.
@MyKmac12 7 жыл бұрын
As an Avid +Markiplier fan, your joke about yelling at fish made me laugh very hard
@3DPrintingNerd 7 жыл бұрын
Hahahaha. Awesome!
@robertmiller6444 7 жыл бұрын
Nice. I do have a couple of further improvements. The dial should be motorized so that you can feed in the coins while the dial continually sorts them. Another thing is some way to remove a tube without disassembly. The thing is, once the first tube fills. you have to disassemble the unit to empty it. Not saying that's a huge deal or any thing, just saying. A question: are the tubes calibrated to hold the the same number of coins as the relevant paper tube to put them into?
@GregAtlas 7 жыл бұрын
It looks like it wouldn't be too hard to set up a motor mount and hook up a little hobby motor to it so you can just focus on feeding the coins into it.
@3DPrintingNerd 7 жыл бұрын
Agreed! Let's get a motor on this thing!
@bberry0609 7 жыл бұрын
do you have a monoprice v2 if so can you make a vid on how to print stuff from thingivers
@RansomMakes 7 жыл бұрын
Awesome redux of the Coin Snorter, dang, now I am saying it. Sorter! SORTER! SNORTER! Ugh. Either way, glad this one works so much better then the previous one. #highfive
@3DPrintingNerd 7 жыл бұрын
I'm very happy this one worked out as well :) #ReturnFive
@brandihopkins2432 6 жыл бұрын
is that blue 🦁 a 3d print? Talk about that in a video. it looks very cool!
@RisingMooon 7 жыл бұрын
it would be interesting to see a coin sorter for €, also because there are quite a few more coins
@leonidass3448 7 жыл бұрын
"I don't yell at fish" SAVAGE ! xD
@ibrahimkayani2824 7 жыл бұрын
nice video guy
@3DPrintingNerd 7 жыл бұрын
Thank you!
@videoscrapheap 7 жыл бұрын
I like! A small chamfer on those edges should fix that one issue.
@3DPrintingNerd 7 жыл бұрын
That's what I was thinking! I wanted to sand it down just a bit, but, I was going to wait and see what Eugene comes up with.
@moenchii 7 жыл бұрын
I would need one with eight different slots. 1 cent, 2 cent, 5 cent, 10 cent, 20 cent, 50 cent, 1 Euro and 2 Euro.
@thegunfoogle2864 7 жыл бұрын
I like how it's multiple parts, and minimal. This looks like it took much less material to print.
@3DPrintingNerd 7 жыл бұрын
I think you're right. Even with the 3d printed coin sleeves, it was less!
@NoelBankTV 7 жыл бұрын
Nice!
@jadedoesart4964 7 жыл бұрын
This world is slowly * change * ing for the better I see
@3DPrintingNerd 7 жыл бұрын
oh mannnnn #dadjoke
@orionteare5929 7 жыл бұрын
Could you print a klein bottle I think you would like the design and shape of it
@markwilliams5654 7 жыл бұрын
how cool u were on the front page
@isaacmiller8579 7 жыл бұрын
Will there be a British version of that?
@3DPrintingNerd 7 жыл бұрын
Hmm... I would ask the designer.
@isaacmiller8579 7 жыл бұрын
Ah yes...that would probably make more sense
@bloogaming8827 7 жыл бұрын
Correction: that would probably make more cents
@isaacmiller8579 7 жыл бұрын
Wow...
@sigyn4340 5 жыл бұрын
Cent-sational!
@loganmancuso3791 7 жыл бұрын
possible modifications: increase the height of the coin tubes and round off the edges. Increase the center pot height the same as the coin tubes. Attach a stepper motor to the bottom and a gear system that will move the gear 1/4 rotation to feed in the coins automatically. Overall a killer project man i want to buy a 3d printer so bad.
@MastaSquidge 7 жыл бұрын
! Is there a larger version somewhere that can take a small jug of coins at once?
@G80808 7 жыл бұрын
That video is how I found your channel so yeah
@3DPrintingNerd 7 жыл бұрын
RAD! So thankful you found me!
@renzo4635 7 жыл бұрын
Big Fan!
@3DPrintingNerd 7 жыл бұрын
HIGH FIVE
@UnlikelyCreators 7 жыл бұрын
Next video Joel makes... "I snort with 3d printed maker coins!?" that would throw people for a loop.
@3DPrintingNerd 7 жыл бұрын
Hahahahahhaa
@maanvis81 6 жыл бұрын
is there a euro version as well? :)
@fredrikbarg9805 7 жыл бұрын
Awesome design that could be improved with a hand crank, a bigger funnel and support for more coin sizes.
@3DPrintingNerd 7 жыл бұрын
I like the idea of a hand crank, or better yet a motor!
@imacommentj259 7 жыл бұрын
god that lion is fabulous
@3DPrintingNerd 7 жыл бұрын
SO fabulous!
@EasternCanadian 7 жыл бұрын
the holder isn't enough to hold down the base. (flashforge Creator pro/still a great print)
@bruhmomentum5064 7 жыл бұрын
Watching this video like: "I want one!" Me-*Forgets that I have a 3D Printer*
@3DPrintingNerd 7 жыл бұрын
GO PRINT THIS NOW
@Querez8504 7 жыл бұрын
"People said i looked and sounded like Markiplier. (shows clip of Mark) That might be true, but I don't yell at fish." Hahaha
@Rouverius 7 жыл бұрын
The coin wheel reminds me of a gumball machine mechanism.. Hey, that would be fun if Eugene could include a turn knob and that famous gumball machine ratchet sound... OK, off to go buy some gum.
@3DPrintingNerd 7 жыл бұрын
Dang it now *I* want gum!
@ihavekalashnikovyoudomath9275 7 жыл бұрын
Pennies fall in a stack 3DPN: *"NO!"* knocks them over
@MrBudderTacoMBT 7 жыл бұрын
So, I'm into things like this, small things, trinkets, or just cool models 3D Printed. I want to get into it myself, but I don't know what printer to get. I was looking at something like a Monoprice Select Mini, since it get great reviews for the price, but realized that I could quickly outgrow it. What would be a better option, say preassembled and with a larger bed but staying uner the $1000 mark?
@3DPrintingNerd 7 жыл бұрын
If you want to get into it, the Monoprice Mini is a great starter. Yes, you will outgrow it, but, you'll also learn a lot about 3d printing without breaking the bank at first.
@CNCmachiningisfun 7 жыл бұрын
I have a coin snorter here. It's rated at 1400 Watts and can snort lots of coins before it gets too full.
@3DPrintingNerd 7 жыл бұрын
Oh really? That sounds like a fun machine!
@CNCmachiningisfun 7 жыл бұрын
+3D Printing Nerd Yeah, my coin snorter really sucks, but it sure does a great job of snorting up the coins, dust, bugs and whatever else can't get out of the way quickly enough ;) . They should market these things, so folks can clean their houses with them. Now, what will these machines be called? ;) .
@ChiralSymmetry 6 жыл бұрын
Now you need to make a Maker-Coin Sorter? XD
@LucasGarrow 7 жыл бұрын
Quick and dirty solution is to file down the edges that catch, but really it wouldn't be too hard to fillet those edges since they do not have anything to do with the function of the snorter.
@3DPrintingNerd 7 жыл бұрын
I think you're right OH WAIT HAHAH YOU SAID SNORTER!
@LucasGarrow 7 жыл бұрын
OOPS Darn you, auto-correct!
@jozafax 7 жыл бұрын
In addition to having no steps, as you mentioned, I think it would stuck less if the wheel had 3 holes.
@3DPrintingNerd 7 жыл бұрын
Hmm, you think so?
@jozafax 7 жыл бұрын
Yes: having 4 holes on the wheel and 4 containers, there is stucktivity potential for all 4 coins at once (3 actually as 1 falls). If there were 3 holes on the wheel and 4 containers, the chance of stucking would be reduced to 1 at a time. I might be wrong on the 4 holes, 4 containers part because: the coins have different diameters, i don't know the hole distribution (if uneven, the stuckedness might depend on rotation direction),... Just a thought.
@linus. 7 жыл бұрын
It was a really good idea to subscribe your channnel!
@3DPrintingNerd 7 жыл бұрын
It was also a really good idea to leave that comment because now I get to reply to it! #highfive
@willparry 7 жыл бұрын
for some reason i thought the thumbnail said "coffin snorter", i then realised it was actually coin s(n)orter, i watched it anyway.
@rick92rr 7 жыл бұрын
Ohh so that's how I found your channel.
@3DPrintingNerd 7 жыл бұрын
Yeah? Rad!
@benjamin_f_gates 7 жыл бұрын
But wouldn't you have to spin it a certain way or the small coins will go inside the larger containers? Or does it have a lock so u can't spin it counter clockwise?
@PhrozenGaming 7 жыл бұрын
funny thing, the vid that made it on the homepage I read as "coin sorter" but this video I read "coin snorter"
@alfredwu7416 7 жыл бұрын
This works terriblely as a coin snorter! :3
@3DPrintingNerd 7 жыл бұрын
Agreed! 0/10 Grade F.
@kleverich2000 3 жыл бұрын
Does the type of filament matter or does it just have to be PLA and can i make this on the ender 3
@Mr37bob37 6 жыл бұрын
I still haven't got the chance to get me a printer, but trying to learn as much as I can. Looking to get the Prusa i3 mk3, yet I still would like to know more about scanning, splicing, and making my own prints. Everywhere I check on the internet said you have to transport scans through the cloud, is this true ?
@bmbirdsong 7 жыл бұрын
I feel like the home 3D printer era is currently at the "dot matrix, or early ink jet printer" stage. What would the equivalent of a laser printer look like, and do you think it will ever be available to the maker community?
@3dprintinguk162 7 жыл бұрын
Formlabs form 2 is great build quality great prints and it uses lasers. probably guna slowly b cheaper and cheaper over time.
@3DPrintingNerd 7 жыл бұрын
THAT is the question, and I don't know the answer :(
Desktop Inventions
Рет қаралды 103 М.
3D Printing Nerd
Рет қаралды 144 М.
Typecase
Рет қаралды 9 МЛН
ProTech
Рет қаралды 76 М.