@q_rid1275 Ай бұрын
DUDE YOUR THE GOAT MAN. recently have figured out all the things you can do with a 3-D printer beacuse of you. Thank you man.
@Mana-ray635 4 ай бұрын
If, in the future, someone doesn't genetically modify a fruit to look like a devil fruit, I'd be really upset
@youbuyverylucky2493 4 ай бұрын
ive never watched one piece before but since i got to see how cool the fruits look i gonna watch it and i'm looking to your future projects
@katzenauge. 4 ай бұрын
Good luck brother, it's really long but more than worth it.
@conner7281 3 ай бұрын
The sue me mentality is a must bro kinda tempted to start watching one piece
@mejgiey 4 ай бұрын
I LOVE the way you did Momo’s fruit! I want one. The colors and difference in the silk and flat pinks look SO GOOD. 😍💖
@mavemaggulle6677 4 ай бұрын
sheesh the kaido fruit looks so cool especially the 5 fruits at the table at 16:57 turned out really really good hyped to see the other one piece stuff that is planned
@janineschulenburg5647 10 күн бұрын
I’m printing the mochi mochi no mi rn
@chaseyvanwinkle3421 4 ай бұрын
i love your Buster Blade
@konka7267 4 ай бұрын
love the new studio!
@chaseboone117 4 ай бұрын
Love these! Got into one piece because of the netflix show (being one of the "too intimidated by 1000+ episodes people). Immediately shifted gears to the anime, and I'm not slowing down any time soon. It's great!
@mavemaggulle6677 4 ай бұрын
bro sounds awesome, enjoy
@camtron1967 4 ай бұрын
Dude the new space looks sick. Loving that room so much. What an upgrade. My only question is Where’s the new mk85 gonna go when it’s done?
@Apriqot 3 ай бұрын
It would be really cool to see the difference between a silk print and you doing your sequence to filling, sanding and paint method. Your projects come out so smooth.
@ThisisDD 4 ай бұрын
Since you have an AMS, try PETG supports with PLA print. The supports don't stick and you get less or no artifacting.
@olive3365 4 ай бұрын
I walked away for like two minutes and as you cut to the timelapse you said "enjoy some nice music" and then an ad started playing and it confused me the entire time the song was playing 😂 The fruits look amazing! I never knew brown silk filament was a thing and now i'm curious as to why I don't have any already 😂
@radish6691 3 ай бұрын
Use PETG for the support interface, no support cleanup. Works a treat.
@dkev001 3 ай бұрын
If you set your Top Z Height to .26 in your support settings , it makes all the difference in ease of removing the supports while minimizing surface damage.
@RegularOldDan 4 ай бұрын
Hitting "like" in the first 10 seconds for that look when you broke the fruit. 😂 Seriously, cool project.
@A_Wispy_Cloud 22 күн бұрын
You should print the GOAT buggy’s fruit.
@collincutler4992 4 ай бұрын
I pri ted the exact same devil fruit....it looks incredible. I even used rhe same filament. Wish i could post a pic😊
@Droneflyer3000 2 ай бұрын
Me: Re-watching all of his videos cause it's the only good thing to watch these days
@Awshucks13 4 ай бұрын
Enel devil fruit looked dope as hell. Definitely printing that bad boy
@TheScottBoys 4 ай бұрын
Love the new studio, keep it up Frank 👍
@Jesus166 4 ай бұрын
I think the pineapple shaped on Marco fruit is because Marcos head and Hair looks like a pineapple
@joshuamccracken8994 4 ай бұрын
Really cool project! I’ve been wanting to print some devil fruits for a while now
@highlatitude64.84 4 ай бұрын
15:30. With that little hook in them, hanging on the wall? Ya, one evening, with a couple friends... It's game on! 😉
@kayden2909 4 ай бұрын
the new setup is amazing Frank!!!
@jeeplvr1323 4 ай бұрын
Amazing as always. Always excited to see and can’t wait for more.
@ThisisDD 4 ай бұрын
I am about to print a bunch of these 🥰
@Queue22 4 ай бұрын
I got a k1 max. Its so good. Couldnt reccomend it more. Just wanted to get that out there. Also the bed keeps everything down, almost too much
@cooperweller5472 4 ай бұрын
He is back!!!!!
@xxmension04xx47 4 ай бұрын
the leaf-like parts on the top of Momo's DF would likely be the same yellowish colour as Kaido's one
@DagrtOne 3 ай бұрын
What do you do about all your waste filament?
@P1X3LAB 4 ай бұрын
Missed ya Frank!! Love the new set up!!
@k.fegleyvipergtsr20 4 ай бұрын
can not waitnto see to you do ichigos duel zengetsu's
@coltonreice978 3 ай бұрын
Can you make a Arkham knight helmet with a flip up visor
@cahms26 4 ай бұрын
You did that painting with a mouse?! I was thinking "that's a Wacom job right there" and then saw the quality of what you did. Killed it, resurrected it, and slayed it again. Nicely done!
@FranklyBuilt 4 ай бұрын
Hahah thank you! I need a pad tho
@Blackbird9070 4 ай бұрын
Dope as always! Also just curious - did you ever finish the Buster Sword? I see it on the wall but don’t see any materia. I recently used your tutorial to build my own (same file at 90% as well and hanging on my wall!) and was just curious!
@Mysta_G 4 ай бұрын
YESSIR LOVE IT BRO!!!
@PeterParker-hw1qw 3 ай бұрын
hey frank, love your videos super help full for starting to print helmets and other thing. i wanted to try to make my own 3d model of something do you have any suggestions
@dia_beast 3 ай бұрын
Could you please make shardblade from the Stormlight Archives? There is a model on thingiverse called Firestorm. It is 6ft long and would be perfect for your sword collection!
@Mr_leen446 3 ай бұрын
In the future i will be awesome if you print kidds fruit!
@ArK18 4 ай бұрын
@franklybuilt the gomu gomu doesn’t look like ted bushido’s file. Is it mave3dprint from thingiverse?
@Mr_leen446 2 ай бұрын
The model changes when it's in the slicer
@therealbarackobama3946 3 ай бұрын
1:54 you can literally see Laws fruit right there in the middle on the right just best to Robins fruit it’s just not colored red 💀
@lordskebii 4 ай бұрын
What situation would you use tree supports opposed to regular supports?
@mavemaggulle6677 4 ай бұрын
you preferably want supports to start from the buildplate because when they start on the print, they usually ruin it a lot. normal supports are straight vertically, so if you want to support stuff above the print, it will have to start on the print. but with tree supports, they can reach around curves, so you can do supports from buildplate even tho the stuff that gets supported is above the print
@lordskebii 4 ай бұрын
@@mavemaggulle6677 oh I think I understand, thank you
@diplocoolus1 2 ай бұрын
The fur on momo's fruit should also be yellow
@MCx10 Ай бұрын
These. Are. Awesome. May I ask what glue you used, please? (13:34)
@amondavis 4 ай бұрын
I am wondering if you could make multi different colors of devil.Fruit and different sizes like kitchen versions.Big versions like what's in your hand in this video and sell them on your website??
@PokProps 4 ай бұрын
RAAAAAAAAAAAAAAAAH DEVIL FRUUUUUUUITS!!!!!!!!!
@DarkKingsWrath 4 ай бұрын
I resin printed the Gomu Gomu no mi with 100% infill. It's about the size of a baseball and it is dense. I should print out the rest of these. Have you thought about 3d printing the og admirals as Spongebob characters
@christopherbaez7282 4 ай бұрын
😂😂 these, look very cool! Fun video! btw loving the new studio look!👏🏼👏🏼💪🏼🔥
@Ichiashi 4 ай бұрын
I been trying to catch up with ur video's, so about that. But anyways u once ask what we would like to see that would be different for you to do, so I thought it would be could if u did a Sculpture.
@Gamingdiamond-fresh 2 ай бұрын
What’s the printer you used, and that website could I used that on the k1c 3d printer or no
@q_rid1275 Ай бұрын
You probably just use the K1 max
@q_rid1275 Ай бұрын
X1C
@q_rid1275 Ай бұрын
P1P
@q_rid1275 Ай бұрын
stuff like that
@Gamingdiamond-fresh Ай бұрын
@@q_rid1275 thanks
@ramon65castro62 4 ай бұрын
Good stuff, all I want to know is where he got that Luffy art piece 👀
@krollmond7544 4 ай бұрын
Hey do you plan on getting (reviewing) the Elegoo Orange Storm Giga? Seems like an ideal printer for cosplays if you have the space.
@tarautromain7820 4 ай бұрын
Orca is a great slicer. But it doesn't have the neptune 3 plus with 0.6mm nozzle settings. And I'm stills a beginner so i don't know or understand how to fix my settings yet😢
@drkknight001 4 ай бұрын
Love the way the silks turned out. Glad to have you back; hope NO was amazing.
@hansencustomcreations5355 4 ай бұрын
Hey man nice studio. Do you still have the work shop garage? I noticed you normally have filament and that in there. Hope everything is good dude 👍👍
@Thor_allfather 24 күн бұрын
Just a question, do you say the time they take to print?
@FranklyBuilt 24 күн бұрын
Roughly
@SuperAirsoftFanatic 4 күн бұрын
Is that a 3d printed luffy on your wall. And if so can you do a video on how you printed it, or where you got the file from i really like it and would love to print it myself.
@eyal_the_goat 4 ай бұрын
Bro plz do a project like another helmet plzzzz
@nicksee 2 ай бұрын
How did you orient the stems? Seems like they would easily break unless you lay them down? Thanks and great content!
@PointBreakStudios977 4 ай бұрын
Is there going to be a helldrivers helmet tutorial?
@JordanBuilds3D 3 ай бұрын
instructions unclear, my house is now underwater
@tyronerusselljr6367 4 ай бұрын
Hey did you 3D print that joy boy as well
@petergplus6667 2 ай бұрын
Wouldn't it be cheaper to get an IDEX on the long run?
@TaylorExperience. 3 ай бұрын
Are you going to do a K1C review? I just sold my Ender-3 3D printer based on your recommendations for 2022 after playing around with it a little. Wanting to get something worth my time and money and just saw ender realized it, what do you think?
@FranklyBuilt 3 ай бұрын
Yep!
@davidmailyan1761 4 ай бұрын
Downloaded Orca right after watching the vid but for some reason whenever I select to start the print (I download the file onto an SD and insert it into the printer) on my ender-5 the printer shuts down and boots right back up again. What would be the cause of that? Ppreciate any help and love the content!
@Schwift3D 4 ай бұрын
Just a tip because I know you value input, maybe take this time to challenge yourself to learn how to 3d model? Could be a fun direction to go in for videos and you'd only get better over time, could inspire others to make stuff as well.
@artichoke4612 3 ай бұрын
Marcos fruit is actually the pineapple
@j.a.o.9395 3 ай бұрын
Have you used a wifi xplus 3
@xdzero9987 4 ай бұрын
do a dragon ball video please!
@terryfang 4 ай бұрын
Oh hi Frank ❤
@3dpathfinder 4 ай бұрын
ok so wth is this Devils fruit from..as in what is Devils fruit? Is it a show a game.
@5FSF 3 ай бұрын
You can just put electrical tape along the outside brims of the cardboard spools and they won't shed cardboard into the system.
@jaiintherarasa1104 4 ай бұрын
“O-pe o-pe” nomi
@ThisisDD 4 ай бұрын
The constant zooming at times messes with my eyes lol
@itssean1492 3 ай бұрын
Still struggling to make it through the anime.
@drewjensen789 4 ай бұрын
Hi Frank, just here to signal boost don’t mind me :)
@jordangamble8956 4 ай бұрын
Man I’m 26th
@Figurefan784 4 ай бұрын
I’d like to say first
@loganmilton3509 4 ай бұрын
Second 😢
@ftmsafc1 4 ай бұрын
Third
@J-MANVII 4 ай бұрын
4th
@RoyalPanda4981 4 ай бұрын
Fourth Edit: I guess I have to take 5th
@Figurefan784 4 ай бұрын
@@RoyalPanda4981 we got 2 fourths!
@j.a.o.9395 4 ай бұрын
Would you recommend the k1 max with the issues that some people have had with it or a Bambu printer ? I'm probably not going to start multi color printing yet but I've heard Bambu printers are really easy to use
Cool Items Official
Рет қаралды 35 МЛН