3D PRINTING Super Mario - How SMOOTH can we get him?

No video

3D PRINTING Super Mario - How SMOOTH can we get him?

Рет қаралды 256,062

Күн бұрын

Testing the limits of the 3D-printer, trying to make an ultra smooth Super Mario. For a long time I've wanted to apply some of the things we have done when doing console modding to 3D-prints to see how nice figures it can make, and it turns out surprisingly good. Im really happy we did this, and I'll most def make more of these in the future.
Patreon: / nerdforge
Super happy with this 3D printer, it's the creality CR-10.
I got this code for 16% discount if you are interested: 3DPrinter
Link: bit.ly/2fjH0OC
The model used made by Mario (amiibo on Thingiverse:
www.thingivers...
FOLLOW:
Website - www.thenerdfor...
Facebook - / nerdforge
Instagram - / thenerdforge
Twitter - / thenerdforge
BUSINESS CONTACT: contact@thenerdforge.com

Пікірлер: 302

@tiagoT_ 2 жыл бұрын

you guys are so talented! love the projects. Binge watching them all😄

@RcLifeOn 6 жыл бұрын

That's some next level painting skills!

@brokenscreengaming1126 6 жыл бұрын

He is your brother

@bjarnehansen1101 6 жыл бұрын

Hi Simon!

@threebreak6303 6 жыл бұрын

I think u should try using an air brush

@joakimeliasson3244 6 жыл бұрын

You can clearly see how the paint have dried "runny" and is probably coated too thick and wet (look at the pants under the right button), quantize the paint to thinner layers would be the proper way, plus if you want a deep gloss, than polishing the paint before and after clearcoat is a good idea.

@herobrinegaming5111 6 жыл бұрын

RCLifeOn I just watched your video of you painting Rick from Rick and Morty before this

@DontpushtheBbutton 6 жыл бұрын

What about the M????????????????????????????? :O

@Nerdforge 6 жыл бұрын

oh no... seems it went missing :'-(

@DontpushtheBbutton 6 жыл бұрын

It must be his secret twin!

@Tsicky 6 жыл бұрын

To avoid copyright infringement

@DontpushtheBbutton 6 жыл бұрын

How? It's fan art, personal use and entertainment.

@awc.sorensen 6 жыл бұрын

Don't push the B button because Nintendo are assholes like that

@MrPoporucha 5 жыл бұрын

Always..ALWAYS print vertical when possible. You may need to cut your model if its too big, but it allows you to put support in a better distribution pattern, goes off easily and leaves less noticeable marks to clean up later. It also gives a better finishing, since horizontal lines give more resolution

@Nerdforge 6 жыл бұрын

Hey, hope you're doing great! I asked Banggood for a better discount code that I could share with you, and I got one that can be used 30 times to knock of 120$ on the Creality CR-10. If any of you guys are interested the code and the link to the printer it applies to is below. Only first 30 can get it though, so if it isn't working let me know and I'll remove it. Cheers! Link: bit.ly/2iR3Gaq Code: bluecr10

@Mativ202 6 жыл бұрын

i think its over... :(

@Nerdforge 6 жыл бұрын

No, it still works! :) Apply the code on checkout

@Mativ202 6 жыл бұрын

after i press checkout with paypal? because there is a coupon box above that where it doesnt work

@Nerdforge 6 жыл бұрын

This doesn't happen for you? puu.sh/ygRhA/d09c4225c7.png Make sure it is the exact printer in the link above :)

@Mativ202 6 жыл бұрын

It worked! i unchecked and checked the box for the printer again and it did work this time, thank you :)

@StefanPiano 6 жыл бұрын

Love the Sheep sweater ;)

@tobyrusanow7189 6 жыл бұрын

PianoSteve IDUBBZTV Sheep squad

@bobbyzobel8316 6 жыл бұрын

Same

@lucasg9526 6 жыл бұрын

im working on getting one lol

@evaeva3062 6 жыл бұрын

idubbbbbbbbbbzzzzzzz

@Snowyafterlife 6 жыл бұрын

You should try poster tack/adhesive putty in the future. Miniature painters use that to mask off layers, with more control. Plus it's reusable, so you won't have to keep using bits of tape all the time!

@3DPrintingNerd 6 жыл бұрын

Great video on what it takes to get a model smooth and painted!

@henfjo 6 жыл бұрын

You forgot the M on Mario's cap, but other than that, it looks amazing!

@AT-Legence 6 жыл бұрын

for painting i suggest you can use liquid silicon mask from Vallejo to ask first the areas you dont want to airbrush. so can get the max out of your Airbrush

@psychoboitrip3125 6 жыл бұрын

99% of the comments "Where's the "M" on his cap?" 1% Good Feedback

@DimplePoji 6 жыл бұрын

Dont think its a good idea to spray just beside the printer.. Im sure you get some of the spray dust somewhere onto the printer..

@user-cb3io4gr9m 6 жыл бұрын

DimplePoji

@asutcliffe25 6 жыл бұрын

Great video dude, I think it turned out awesome. This is the very first 3d printer video i've ever watched. Not for me. but that's something to be proud of

@CrunchyTahoe 6 жыл бұрын

Very nice! If you really want to make it crystal shiny, wait about a month for the clear coat to completely dry, then use the Tamyia polishing compounds (coarse/fine/finish) then modelling buffing wax.

@michaelgoodman8849 2 жыл бұрын

Hey a friendly suggestion for removing supports. If you get a wood burning kit, they often include an exacto blade that heats up. This way you can cut your way through. Watch out for fumes, and use in a ventilated area. You might like a sawdering gun as well as a different option.

@Overreacteed 6 жыл бұрын

That was really cool! I think I would've liked it more if the details on the face were made with a paint brush, but I get the issue with the texture. Greetings from Mexico!

@samking8673 6 жыл бұрын

That round of applause joke was great

@MrPatben8 6 жыл бұрын

You could have printed in ABS and then given the print an acetone vapor bath. Did you consider that option?

@Nerdforge 6 жыл бұрын

Yes! I have never done it, but it looks awesome! Anyway, with only PLA available this is what I went for. Also after the rough support material cleanup I would need to take the same steps with ABS as well.

@ThePeteski1111 6 жыл бұрын

Need a good enclosure to to that tho..... then again a cardboard box with a sheet of acrylic would fix that.

@TheToyStoryKid101 2 ай бұрын

On the filament wheel they have recommended setting to get your prints looking good

@duskcypher8894 6 жыл бұрын

Get a dual extruder and use the second one to print your support material in a water soluble substance.

@aeriumsoft 6 жыл бұрын

yea at least its worth a try

@ThePeteski1111 6 жыл бұрын

If you mess around with print settings in simplify 3d about support structures you can get a "tear-away" style support structure, the best method is to make a small test model and make procedural tweaks in the settings until you find the perfect settings for your printer. Your paint skills are unreal though, keep doing what what you do best.

@SocratesAlexander 6 жыл бұрын

Two advices: 1) Always do a close up shoot of your printouts. 2) While painting, use "masking fluid" instead of painter's tape.

@maammoos5377 6 жыл бұрын

For easier support removal, try adjusting the support interface distance or whatever it is called in your slicer. This allows the model to adhere less to the support. On any dual extruder printer, you could of course use PVA or hips for the interfaces between support and model, saving on expensive material and giving you the ability to just throw your model in water or limonene and your support will come off literally all by itself.

@justoneofthesheep 6 жыл бұрын

To get support to remove easier = I don't know what slicer your using but If your using Cura changing the 'top support distance' (distance from the top of the support to the print). It should be pretty much called the same thing threw out other slicers. you may need to dig around as some slicers don't show it and it will mean you going into the settings and finding it. It will be in the 'Support' section... If you increase this tolerance slightly it will help. keep increasing until the supports come off clean. mine was at 0.15 at first and I had your problem . I increased it until 0.2 and now supports remove with ease . Hope this helps .

@MrPoporucha 5 жыл бұрын

I guess that small small distance in the bottom-top of support setting is because cura expects you to be using a dual extruder with different filaments

@Vince-nw4lh 3 жыл бұрын

1:46 METAL MARIO

@nathanbrutal4183 6 жыл бұрын

Again, you guys are crazy!!! I'd Definitely have not spent Near as much time!!

@DJPacoRamirez Жыл бұрын

Don't be shy show the back lol. Thanks for the video!

@kzookid2051 5 жыл бұрын

He turned out really good.

@supermariocaspian2357 4 жыл бұрын

It doesn’t look officially like Mario you still have to spray paint a tiny M on his hat

@MegoZ_ 6 жыл бұрын

The sheep sweater dude!

@rolfv.s.2870 6 жыл бұрын

Amazing look. I am gonna make the high poly bulbasaur and this might help me with the finish

@Trashtic_Plastbag 2 жыл бұрын

Your face when you heard that noise 🤣🤣🤣👌🏻

@etro8564 6 жыл бұрын

Nice video , i like the spray painting

@CyberNeeja 6 жыл бұрын

For supports: increase the distance between the model and the support structure in your slicer. 0.2 mm should be enough.

@aeriumsoft 6 жыл бұрын

kult å se en så kul norsk fyr her på youtube!

@shoxdanger 3 жыл бұрын

one tip using airbrush add a few drops of paint and some drops water you use less paint and get a beter paint job in the end

@Champsterz 6 жыл бұрын

wow looks like still a lot of work required after 3d print.

@dsmmike95 6 жыл бұрын

Wow looks great and really good for your first try

@Lip22Gloss 6 жыл бұрын

Watched the whole thing! Thanks for the entertainment, man!

@diaperrash8952 5 жыл бұрын

Looks damn good. Great work painting the eyes.

@alamadrid97 5 жыл бұрын

You could have printed it verticaly that way the finish could have been even nicer! But good job overvall!!!!

@3thanheimer 6 жыл бұрын

try using a dual extruder printer and make the support filament water soluble

@nintendoninjas6321 6 жыл бұрын

Just put an M sticker on the hat and your done!!! Good job!!!

@VTXINC 6 жыл бұрын

You ought to put the tape on smooth and flat, if your bed is heated then you wont need to spray on any adhesives for PLA to stick. The advice to use builders tape is definitely worth mentioning for those new to 3D printing, but please don't copy the application as shown in the video. A good first layer and minimal use of supports is well worth the effort it takes to apply a good build surface.

@MCsCreations 6 жыл бұрын

Really amazing job, man!

@MaximilianonMars 6 жыл бұрын

I got some great tips from your video, thanks bud!

@nickanderson8305 6 жыл бұрын

Not sure what your slicer is. But generally you can play with support settings enough that you can remove them relatively easy If you use Cura they have alot of settings you can change

@pimciu7202 6 жыл бұрын

WOW. I love it :D

@nicolle2126 6 жыл бұрын

Nice! Wish you covered the turn table in plastic or foil to keep it good safe though

@SharkBeret 6 жыл бұрын

You forgot about the M on his hat... no worries, you could put cappy eyes there!

@DrSandifer 6 жыл бұрын

Awesome work

@GamerCrewUK 6 жыл бұрын

Low health Mario SFX 6:14

@shadic777 6 жыл бұрын

if you add a star on his hand i bet you can mod that in to an epic mini lamp

@pabloal1226 6 жыл бұрын

you can treat it with acetone vapour so it gets shiny and smooth quickly, there are some tutorials online

@MrJefferson105 6 жыл бұрын

You can increase the distance gap between tge support and the part on the slicing program. I use simplify3d.

@akikank 6 жыл бұрын

For the supports you could try water soluble 3d printing mass? 🤔

@mattewblack6549 6 жыл бұрын

Awesome! It's Amazing ! What type of airbush did you use?

@user-vt6fg7sb6q 6 жыл бұрын

The 'M' letter has lost from Mario's hat

@Jordiw00t 6 жыл бұрын

I've got the same sweater! Great video dude, subbed.

@WindowOfFantasy 5 жыл бұрын

love it so much thank you !!

@devildeggz 6 жыл бұрын

Thats not mario, mario has an M on his hat This figurine is an imposter

@akahige9626 6 жыл бұрын

Awesome !

@serkanyavuzmercan Жыл бұрын

Hello , your work is very nice. Thingiverse link is broken. Is it possible to share the STL file?

@trinitylove8795 5 жыл бұрын

It's nice and inspiring to see someone young and beautifully creative and focused..Not just waisting life on Nothingness.. That perfect peice is worth thousands duplicated🙏😁☀.. Just Perfect.

@Jr-kd7lp 6 жыл бұрын

Forgot M but still better than what I would dream of doing

@GDXBIX1 6 жыл бұрын

I really love the m mark

@W.Keeling 6 жыл бұрын

Nice job, I've subscribed, have you the link for the airbrush, was thinking of buying one

@brycefrogley1310 6 жыл бұрын

My friend has that same hoodie.

@deovisco 6 жыл бұрын

Dud the mario logo at the hat

@JayFolipurba 6 жыл бұрын

the M on the hat is missing and now I realised how similar Mario's costume is to the costume of popular German cartoon figure Benjamin Blümchen. Look it up, I'm right!

@featheryfemme 6 жыл бұрын

JayFolipurba not really.

@haramboi69gays54 6 жыл бұрын

You wannna know what’s funny? That there’s probably no 3D printer that prints with color.

@lexibigcheese 6 жыл бұрын

can you pre-print support, using a soluble filament? then immediately change the filament to a normal one,then print?

@frankvonthienen3862 6 жыл бұрын

Nice work.... impressive...

@EricTGK 6 жыл бұрын

*reads title* until he becomes flat

@slotdino1 6 жыл бұрын

Because of your Problems with removing the Support material. Maybe concider changeing the seperation distance a little Bit bigger than the default. Or use the Software Simplify3d the Support is Perfect by default. I Hope this will help.

@dustymango1 6 жыл бұрын

You forgot the m on the hat but the figure still looks good

@BradleyHerbst 6 жыл бұрын

Good job. Love the video.

@felixgla30 6 жыл бұрын

Nice job! But where is the iconic “m“ on his hat?

@duskcypher8894 6 жыл бұрын

Flix113 I KNEW IT I knew there was something off!

@kooplah8420 6 жыл бұрын

Flix113 Possibly Legal Issues (probably not though)

@Someone-gn4st 6 жыл бұрын

To avoid a copyright infringement. Without the M it's not Nintendo's Mario, just some random one.

@darioafonso2963 6 жыл бұрын

very nice!

@VaultBoi101 6 жыл бұрын

Have you ever tried pei sheets cut to size I have one on my robo 3d r1+ and I don't need glue or painters tape maybe you should give it a shot :)

@frommypointofview7173 6 жыл бұрын

You forgot the emblem on the Hat

@deepfriedrooster4695 6 жыл бұрын

Use water soluble supports. They dissolve in water.

@sergiogabriel992 6 жыл бұрын

Mother of god! good job! :3 :3

@SianaGearz 6 жыл бұрын

A tool to remove support better and easier doesn't exist :( but you can try to fudge the slicer, with the support shape (line/accordion removes easier than grid) and increase offset, which will make supported surface rougher but support easier to pull off.

@etzbetz 6 жыл бұрын

Wow, where do you have all that hardware from :o Great tips btw, this will be very handy if I'll ever plan on doing such a thing myself.

@danielpassau1991 6 жыл бұрын

Try to use curve-tape to get smoother results while painting. The Painters-tape is to raough for it. But still nice job

@jeonsooah472 6 жыл бұрын

Wat did u use for painting is it acrylic or thinner based color? Did u mixed water ? Also i would like to know the filler u used

@davidkieler4346 6 жыл бұрын

Great video!

@g01d3nfreddyYT 5 жыл бұрын

Mario's mustache is black not brown.

@ImmodderNation 6 жыл бұрын

Great video! Maybe a matte clear coat would have looked better. It kinda looks like porcelain now. The sanding turned out wonderful, i'm surprised you didn't go for an acetone bath

@kane00000 2 жыл бұрын

I personally was trying to make it as shiny as possible. Glad you liked commented and subscribed. I'm accepting donations so I can take a few trips with some friends if you want to donate about $500,000.

@ImmodderNation 2 жыл бұрын

@@kane00000 is that in USD? I gotta eat too.

@kane00000 2 жыл бұрын

@@ImmodderNation I'll have breakfast you can have dinner

@billysgeo 6 жыл бұрын

Why first paint and then prime it?

@wordreet 6 жыл бұрын

Crazy. Why not print at a finer resolution like 0.10 or 0.05? Heh, I know it'll take much much longer, but you spent 2 at least days with the primer. Or you could do some "solvent smoothing".