My INSANE 100 Dart per Second Nerf Gun | Finale
Рет қаралды 152,805
Күн бұрынTo try everything Brilliant has to offer-free-for a full 30 days, visit brilliant.org/3DprintedLife/ . You’ll also get 20% off an annual premium subscription.
After years of development, my 100 dart-per-second Nerf gun is finally complete! Join me as I reveal the epic upgrades and challenges faced in creating this ultimate blaster. Implementing upgrades like faster darts, easier mag loading, quicker mag swapping, and adjustable fire modes are just the beginning. Witness the raw engineering process through test runs of this blazing-fast Nerf gun.
Get your custom pcbs and more from PCBWay! www.pcbway.com
Order a Bambu Labs printer here! (affiliate link) shareasale.com/r.cfm?b=228215...
Project Page: cad.onshape.com/documents/74a...
Git Page: github.com/DDeGonge/FastHecki...
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
If you'd like to support plus receive some exclusive perks, you can do so here!
/ 3dprintedlife
Join this channel to get access to perks:
/ @3dprintedlife
Join the discussion on Discord! / discord
Follow me on Instagram and Twitter! / 3dprintedlife_official
/ 3dprintedlife
Buy my filming gear! (Affiliate links)
Sony a6400 amzn.to/3d0SMee
Tamron 17-70 lens amzn.to/3vLqYkx
Oben Tripod amzn.to/3dd4S40
Light Panel amzn.to/3Qa1dTs
A huge thanks to all my Patreon Supporters and KZfaq Channel Members!
#nerf #3dprinting
0:00 - Intro
1:05 - Brilliant
2:24 - Belt Drive Debugging
4:25 - PCBWay
4:40 - New Handle
5:00 - New Mag
6:15 - Mag Release & Belt Tension
7:25 - Starting Tests
11:30 - Finally Working!
14:33 - 100 Darts/sec!
15:18 - Outro
This video was sponsored in part by Brilliant and PCBWay
@3DprintedLife Ай бұрын
To try everything Brilliant has to offer-free-for a full 30 days, visit brilliant.org/3DprintedLife/ . You’ll also get 20% off an annual premium subscription.
@Mirnixer Ай бұрын
How they heck did you comment 4 hours before the video gets posted?
@3DprintedLife Ай бұрын
Just wait for my next project…a pocket sized Time Machine 👀
@jadenotto7239 Ай бұрын
the affiliate code isn't working for me, I'm only able to get a 7-day free trial instead of 30-days. I'm guessing this is a problem on Brilliant's end but if there is any known way of getting 30-days free I would really appreciate it.
@3DprintedLife 29 күн бұрын
@@jadenotto7239 I'm sorry that's odd, have you previously had a membership or trial with Brilliant? I'll check with them and see if this is a known issue.
@3DprintedLife 29 күн бұрын
@@jadenotto7239 I confirmed with my rep that the offer code is working as expected. If you are a returning user, you may not be eligible for the 30 day trial. If you are still having issues, please contact brilliant support and they'd be happy to help you out. support@brilliant.org
@puil0k_960 Ай бұрын
It cost 540$ to fire this weapon for 12 seconds
@ManaHarrell-ep5eq Ай бұрын
Darts arnt that expensive youknow
@ManaHarrell-ep5eq Ай бұрын
Adventure force pro darts are 10 bucks for 100 darts and 20 for 200
@eonbree8593 Ай бұрын
@ManaHarrell-ep5eq you obviously dont know this refrence then. thats too bad.
@ekulgaming6867 Ай бұрын
Asumeing the conversion rate of 0.1 for one dart it would be 120 dollars
@ChainsawFPV Ай бұрын
Almost into military budget........ Lmao
@JeffGeerling Ай бұрын
8:23 lol DuPont, they are hell... but a necessary evil
@Diesr Ай бұрын
Jeff geerling? Damn 😮
@glowytheglowbug 29 күн бұрын
pi man :D
@ryanpallesen3569 Ай бұрын
I think a lot of your problems with jamming at high speeds can be explained this way: When the dart leaves the magazine, it has incredibly downwards momentum. The more darts you're trying to shoot, the faster your magazine, the more momentum. Your darts are a flexible object, and you're only catching them at the tip with your launcher, so the momentum in the bottom is continuing, which then causes friction and jamming. This is also the same issue with the tips being brought upwards and angling strangely. This might be fixed by changing the angle of the drum, either making it horizontal to transfer the entirety of your rotational energy on release into forwards momentum, or diagonal to just cut down on the amount of energy that you're having to mitigate/deal with on the dart when it is released from the magazine. Custom hard rubber darts or solid darts might also solve this issue, but that doesn't seem like an option.
@3DprintedLife Ай бұрын
You're exactly right, the darts are moving at nearly 7m/s when shooting at 100/s rate. And they have around 2-3 ms to change directions and extract from the mag, then
@sharkbyt8806 Ай бұрын
@@3DprintedLife I wonder if you could use a harder, thinner dart in order to counteract this issue. I don't have the resources to try this but it would be cool if someone did. The downside is that they would hurt a lot.
@draco6349 Ай бұрын
@@sharkbyt8806 i think at this point making the darts hurt more is perfectly reasonable, if only out of sheer spite for the project. xD
@ironbeagle1610 29 күн бұрын
@@3DprintedLife I wonder if you could integrate the mag and the feeding belts more closely. right now there a lot of space between them and they don't really join together. maybe you could somehow make the feed belts mesh with the magazine by having cutouts in the mag for the belts to sit.
@paranoidzkitszo 25 күн бұрын
What if a "force" was added from the back? So, the dart isn't just snagged, dragged, bagged, sometimes making it, other times just causing ones' self to go mad- what if a slight flow of air was being generated by a fan from the back to kinda push it along especially at the higher speeds so that it's not just the front of the dart being grabbed by the shnoz and dragged into criticall velocity like a brat child getting caught stealling by thieir moms at the candy store/ toy store....
@garin4364 Ай бұрын
Awesome! ... ... Wanna try Mega Darts or vortex?
@3DprintedLife Ай бұрын
Mega darts would be hilarious. But no :)
@originaljoke4502 Ай бұрын
vortex or even just flat foam discs seems like it could get pretty ridiculous, might try designing something for myself
@ericlotze7724 Ай бұрын
Rival/Vortex are the way! SO much quicker to pick up with those mesh basket things.
@jackermis3104 Ай бұрын
@@3DprintedLifehmm i may try to take a old leafblower do something like that, have all the air channel into the feed system, aending the dart forward into a flywheel system like yours, and out of a barrel with the leftover exaust of air or co2 from the blower. Either way im not sure i can really make this possible, but i might try. For i have zero knowledge of programming, but maybe i can make it completely mechanical. Mechanical mags, full speed flywheels (sustained fire may have cooling issues, water cooling or heatsink?
@jackermis3104 Ай бұрын
@@3DprintedLifeeither that or i may try to make a rather nasty feeling shotgun
@marekfiferna Ай бұрын
Important note about drone ESCs: Their current rating is based on air cooling. Without cooling, expect them to blow up even below that. And if your throttle signal is jittery as hell, they (or the motors) are gonna pop too
@3DprintedLife 29 күн бұрын
Yeah I expected the heat from not cooling them, but they only run at high load for a few seconds tops so shouldn't burn out. I did discover a bad signal would kill the esc's haha but that was resolved by switching to the teensy!
@Jon.S Ай бұрын
Time to create an automated mag-loader....dump the darts in a hopper and it sorts them to be the right direction and then feeds them into a mag....
@wistralis7387 Ай бұрын
One exists from CreateWithEzekiel for half length darts
@Cam64viper Ай бұрын
Yes! More! Perhaps, since you already have the rotating design working, you could make an RPD-style belt inside a drum the same size as your current drum, and make it belt fed? I don't expect it to be nearly as fast, but it would be a fun challenge
@3DprintedLife Ай бұрын
Definitely could modify it to be belt fed, would be an interesting way to increase cart capacity. But no way it’d top Gatling Tommy’s!
@Rebar77_real Ай бұрын
Teflon rails as guides to help them from catching and throwing them off bore? That it worked that well kicks ass.
@3DprintedLife Ай бұрын
Teflon does work great against the foam but it’s terrible against the rubber, still too much friction there
@Rebar77_real Ай бұрын
@@3DprintedLife Ah nuts. How about a wedge shaped belt to feed better as the round comes down, or even full V-shape to capture the shape of the tip? Do the initial belts need to be that fast? They only need to pluck the round out of the magazine to feed to the next drives, right? Are the belts too long for plucking duty? Belt shape to grab the tip better and not so fast. Let the secondary or tertiary drives accelerate it, type thing. Just throwing thoughts at the wall, cheers all!
@FTG_Zander 29 күн бұрын
14:07 the fact that u managed to hit your own Dart is just amazing
@3DprintedLife 29 күн бұрын
Haha oh wow I didn't notice that before. Slow darts gotta get out of the way :D
@FTG_Zander 28 күн бұрын
@@3DprintedLife „I DEMAND YOU MOVE!!!“ - a fast dart once said
@justOVERCH Ай бұрын
9:25 I think a physical button on the bottom would be better than a servo
@arcanealchemist3190 Ай бұрын
the servo allows it to be a smart-blaster, and eject the mag as soon as its empty. which isnt practical but does add cool factor. pretty sure this design does allow for both the wedge and a pull-tab at the back for manual ejection. id be suprised if this isnt already in the design and just not covered.
@teresashinkansen9402 Ай бұрын
But then won't be as TeChNoLoGiC.
@braxeton671 29 күн бұрын
12:00 Now that I think about it, the way you spin the mag is similar to how a revolver works by spinning the chambers... with that insane fire rate this thing is more akin to a mini revolver autocannon Awesome and scary!
@johnmichaelmorrow1589 Ай бұрын
Finally, I’ve been waiting so long for the update! So pumped!
@lyrag6376 Ай бұрын
I love DuPPa's I2C Encoder and I2C Encoder Mini because it solves all the annoyance with using interrupts to read the quadrature signal and lets you just read off an I2C register
@covodex516 8 күн бұрын
Once again I highly appreciate all 3D printing content creators who openly show their journey through all the failures until they finally archieved a working device. I really dislike it when people act like its just printing, put it together and there it is. Integration hell is something every maker will encounter at some point, usually in everything when its even just mediocrily complex. Many of them will give up out of frustration and I find it important for them to see that even "professionals" have these exact same issues as they have.
@MysticX_X Ай бұрын
When this came up on my feed, I thought it would be using Compressed Air, But this So much more complicated than that Kudos!
@quantumview8151 3 күн бұрын
There are some changes that are necessary to make. 1. Current limiting. It will jam at some point huring regular use. 2. A jam door and improved belt frame to more easily clear jams. 3. (Not as necessary) Perhaps the dart belts could go at a speed proportional to the fire rate.
@DIYDSP Ай бұрын
I lol'd at "consumables." Great work!
@sage5296 7 күн бұрын
honestly I think it's cool that there's like 3 or 4 different 100dps nerf guns in existence now, and yet they all work in completely different ways!
@lady_draguliana784 Ай бұрын
@JeorgSprave over at the slingshot channel has tips on how to make a cheap and easy projectile catch. just need: -medium cardboard box -towel -box knife -tape (optional) -fold in or remove all but one flap around the opening -cut 2 slots into the side of an amazon box about 2 inches or 4cm apart perpendicular to the opening, on the side opposite the remainder flap, -slip a towel into the slots, draped over the middle bit (leave the towel on a hangar to stiffen if needed) -dangle the towels layers like curtains, passed the remainder flap, which you can tape up to make a basin to catch your projectiles that's it, takes 10 to make your first one, and I've made them in just 2min. you can also just cut one larger slot if you have a simple triangle hangar that's longer than the width of the box.
@SSTC. Ай бұрын
Why didn't you use wide GT belts for the belt drives? Widths up to 15mm are available. Perhaps they would have performed better at such speeds as they don't stretch as much. And if you turn them inside out, the teeth would provide extra grip. Also, a pair of flanged bearings with a regular bearing (or a spacer) between them would work great as a pulley in that case.
@inoob26 10 күн бұрын
Maybe he wanted a drum mag design from the start
@newklear2k Ай бұрын
Perhaps consider two belt stages. A slower catch belt feeding into a faster propulsion belt is how I've seen similar mechanisms work well before when the item is flexible.
@tomarmadiyer2698 27 күн бұрын
I pondered this too Also thinking of spin.
@CharlesCalvinTheUndying Ай бұрын
Is it just me or does this look like a bolter
@lupusdude7906 Ай бұрын
For the emperor
@Mini_krieger 28 күн бұрын
FOR THE EMPEROR!!!!
@drflux Ай бұрын
This is absolutely Amazing! I would love to get my hands on this! Great work!
@theworkshopwhisperer.5902 Ай бұрын
Here's an idea maybe an RC tank with any variety of strange wheels screws multidirectional drive and a mega dart launcher. The fun bit is some kind of overcomplicated and deliciously over engineered autoloader for the mega dart.
@OnlyXaM Ай бұрын
15:05 a dart lands upright lol, its just under the barrel
@ChainsawFPV Ай бұрын
I love that you can put so much different music on the ESC's. Bluejay is the best firmware for startup songs. Try the Ovonic V2 130C lipos. They are less money then a Tattu, and the same quality. And way better then those CNHL. Black's.
@ironbeagle1610 29 күн бұрын
this is such a cool design. once you get it flushed out you should definitely order a custom PCB for it so you can make the body slimmer and integrate everything better. also one suggestion is to make the mag release purely mechanical, while the current design with the servo is really nice, a mechanical one might take up less space and have less weight.
@zaku0880 Ай бұрын
Maybe you can build a nerf lancer from gears of war with a nerf chainsaw congratulations for the project by the way
@DSZI.ShyHunterBB Ай бұрын
I hope engineering channels such as Stuff Made Here, etc. take on the challenge of refining your current design to work even better. After all, it’s only a matter of time before someone designs a blaster and mag that can do 1000 RPS. 😉
@hazza2247 Ай бұрын
amazing that u didn’t give up given all the annoying little hiccups 🔥🔥 very cool project
@Diesr Ай бұрын
Angle the feed belt a bit in the opposite direction of the turning so the feeding is gradual and make the belts spread and then push inwards a bit so they can slowly grab better
@atacstringer8573 29 күн бұрын
Insanely Fast Fire rate and the design looks really cool also
@nanastos18060 Ай бұрын
Awesome job! Absolutely love it and all that hard work BRO… nicely done!!!
@VictorGarcia-ug5jn Ай бұрын
I think maybe make a cone where the mag loads in to the treads, the bearing ramp is awesome but the heads are getting stuck on that first bearing, if you do a cone maybe it'll help
@billymarmalade3263 26 күн бұрын
instead of a spring system, could you use centrifical force to bring the darts to the outside of the mag? youd most likely have to make the channels for them straight though.
@tcdenby Ай бұрын
I've been waiting for this to drop, looks awesome!!
@Demonanimator 29 күн бұрын
In my opinion that is a very narrow barrel those darts are expected to pass through, which may be why they sometimes get jammed in the flywheels. The narrow barrel space may also be causing dart drag, which may be why your darts aren't traveling straight when fired.
@ezrakornfeld8436 Ай бұрын
I swear bro I got an A1 mini 2 days ago and NOW you have an affiliate link for the X1?!?
@t-rev525 Ай бұрын
lol I just re-watched your last video yesterday. Good timing
@Turtle_1976 Ай бұрын
You’re using a Bamboo printer?! What about the Eclipse3D2?? 😂 I still have mine and it works fine.
@infinate_gaming Ай бұрын
Fun idea: make it eject shell casings (broken darts)
@3DprintedLife Ай бұрын
Haha oh it kinda already does when it jams at full speed. It tends to rip a few in half and spit them out the other side before the mag locks up
@infinate_gaming 28 күн бұрын
@@3DprintedLife ii guess, but i was thinking maybe more of a controlled and reliable sort of add on but that probably works too xd
@aze4308 Ай бұрын
you should make a cinematic for this gun to show it off!
@walf6978 29 күн бұрын
You should use JST connectors for the wires. I've never gone back to dupont since switching. They're polarized (so you can't plug it in backwards) and have a locking feature.
@3DprintedLife 29 күн бұрын
I did replace them with jst connectors, but a non locking variant
@Napoleon_Bonaparte1804 Ай бұрын
For the darts going all over the place, you should put a bcar. A bcar is a type of barrel addon that acts like rifling.
@siberx4 Ай бұрын
These generally don't work that well on flywheel-based blasters; they rely to some degree on the air pressure of a typical spring-and-plunger arrangement pushing them from behind to ensure the darts travel through the bcar reasonably straight and don't lose too much velocity doing so.
@shatteredskies191 Ай бұрын
@@siberx4they work fine on flywheel blasters but are a bit more touchy. On a springer, you usually have air ports before the bearings, so that’s not relying on the air pressure either.
@maweitao Ай бұрын
@@shatteredskies191Air pressure is not a factor in flywheelers; the only thing imparting momentum is the flywheels themselves. It's why the only marginally effective BCARs sit just ahead of the flywheel cage. Good dart alignment is one reason, but the bigger issue is that anything ahead of the dart, be it bearings or the barrel is doing to drop FPS. Springers, on the other hand, are entirely dependent on air pressure. It's why barrel length is an important component. It's so much of a factor that muzzle blast can disturb a dart's flight path and that's why some BCARs are ported.
@shatteredskies191 Ай бұрын
@@maweitao correct. But anything after that porting on a springer will also drop fps. All I’m saying is that bcars can be used effectively on flywheel blasters.
@piconano Ай бұрын
Super cool project.
@Forakus Ай бұрын
Really cool project, maybe a bit too fixated on the 100 darts/sec but that's understandable. I think adding additional features and improving reliability even at a lower rate of fire would've made a better end product, but of course a much less cool youtube video title
@tech_of_steel20official Ай бұрын
I have a question, why didn't you use rubber belts on the belt drive? I don't remember if you explained it in a past video but I feel like it'd be a good idea compared to plastic, also with rubber belts you could have a very small belt side loaded into the drive to get rid of any problem with the belt expanding when sped up. Also for the jamming problem I don't know if it would help but you might be able to have a tube barrel with cut out sides for the belts instead of a open space where the darts can stray off the wanted trajectory, also another person has said the centrifugal forces of the rotating drum might be your problem, but I think this might be the solution to said problem.
@RonaldMcDonald6969 Ай бұрын
I think belt drives that contour more to the dart's round shape, or use 3 or 4 belt drives would work better
@lisaridener7514 29 күн бұрын
I feel like you should’ve not over powered servo might like break sometime soon because of it but if it’s like a gap thing then yeah I would get it but it seems like you wanted to keep it there forever so I don’t know and also you should do like the ultra darts because they are way stronger than the regular dartsbecause they’re like fully filled up with like the strong like foam, but I don’t know he’ll be the best though
@originaljoke4502 Ай бұрын
this is the exact kind of bulky design and crazy concept for a weapon id expect to pickup in fallout 4. well done
@boid9761 Ай бұрын
Think you can just design the mechanism alone? I think such a nerf gun deserves it's own proper shell, and that means shell integration
@3DprintedLife Ай бұрын
Over-integration is usually my downfall. I tried to keep things modular here so the shell is fully cosmetic
@nicktechnubyte1184 Ай бұрын
You had me at Ludicrous speed
@nucleartime Ай бұрын
Have you tried using EPS darts? They're a bit more expensive, but I find they feed better on finicky blasters due to being stiffer.
@3DprintedLife Ай бұрын
Ah no I haven’t but that does sound like it would help!
@sokjeong-ho7033 Ай бұрын
Based dedication to making it easy to skip sponsored sections 👍
@Gunbudder 10 күн бұрын
why not go to track fed like a real minigun? they have to use a track that rounds slide on because any other method is too slow or unreliable for feeding. and you don't need extra barrels either like a real minigun does because your barrel doesn't factor in to firing a dart at all (you aren't even using gas expansion to move the darts). i'd move towards a huge carousel that feeds a track into the "action" of your two belt drives, and then a rotating pawl that grabs darts from the track and puts them into the belts, then moves out of the way (exactly how the minigun's action loads). what you have now is like if you deleted the track and the loading system on a minigun and just threw rounds from the carousel into the open action lol
@willcubemakes Ай бұрын
Awesome project 👏
@Scott.E.H Ай бұрын
It's BEAUTIFUL. Looking forward to whatever you're cooking up next.
@3DprintedLife Ай бұрын
It involves irresponsible amounts of current running through tiny pcb traces :)
@onealclamp2470 18 сағат бұрын
Next time try to fire 2 darts sequentially as fast as possible, who knows how many darts per hour you could title the video with!
@RealAndySkibba Ай бұрын
Yes!! You're back!
@amyrongo7987 22 күн бұрын
Nice job!
@SamChaneyProductions 28 күн бұрын
Some seriously impressive stuff, I would love to put together a project half as intricate as this
@jacobnewman3152 2 күн бұрын
Maybe you could add a auto tensioner to the belts, similar to an automotive tensioner on timing belts or accessories belts.
@3DprintedLife 2 күн бұрын
These belts are elastic so that doesn’t help. Tension can be adjusted by modifying the belt loop length. This is also how it’s done on cars typically for belts running to accessories that are under less load
@jacobnewman3152 Күн бұрын
@@3DprintedLife I didn’t expect you to get back, that makes sense though. Watching the slow mo with the belts kinda almost jumping around. Which maybe had an impact on how the darts fed in. Also do you plan on making this more reliable in the future?
@blendervendor2220 Ай бұрын
this is actually kinda cool but still I think it's still a bit of an over complicated design. Still best one out of the group (not including the moab. that one wins purely on style points).
@8lives873 Ай бұрын
Amazing. You should make a running minigun. Instead of rotating magazines make it a rotating barrel ;-;
@SuperCaitball Ай бұрын
I mean the MOAB by Gatling Tommy is already that made manifest.
@user-ny2nx2fg2f 4 күн бұрын
your work is so amazing! and I wonder how you make things so well!! I started to make things too. but after watching your videos, I feel I'm just one of chimpanzees. thank you for sharing your videos and knowledges.
@pizo_225 5 күн бұрын
why not just coat a rigid belt material in something that can grip a dart? maybe stiffer material will keep the belt from expanding.
@metalsuccattack Ай бұрын
without the need for a 100 dps blaster, this drum design does seem really cool for a high capacity blaster and would rock for someone to build a tommy gun style blaster off
@3DprintedLife Ай бұрын
Setting it to 10 or 20 darts/s fire rate is actually surprisingly useful! Though a little unweildy for actual use :)
@operaatio5117 Ай бұрын
A big problem just might be the darts themselves. The darts experience extreme acceleration and changes of movement. The darts just can't take that kind of beating.
@Ykulvaarlck 4 күн бұрын
if you offset the flywheels(? the two wheels at the end) diagonally, would it spin the darts and cause them to stabilize?
@3DprintedLife 4 күн бұрын
Yes that’s what I did!
@heavyweather Ай бұрын
I'll probably try do develope an autospringer for full lenght darts. Wonder if someone would want to helf with electronics?
@rolandorodarte893 Ай бұрын
thats crazy! I mean the fact that nerf is not sponsoring those darts 😅
@3DprintedLife Ай бұрын
It’s nerf or nothing, and I got nothing!
@theKhaosFactor 29 күн бұрын
What 3D CAD software are you using? I’d like to make my own projects but i don’t think TinkerCad is going to cut it.
@3DprintedLife 29 күн бұрын
Onshape! It’s web based, free for individuals, and very powerful!
@theKhaosFactor 28 күн бұрын
@@3DprintedLife Thanks!
@peter360adventures9 Ай бұрын
Awesome build
@2000jmartins Ай бұрын
Just in case it randomly sparks enough interest for you to go back to the project, I’ll ask again 😅 Really hope you go back to your robot arm project (even though this project is very much impressive)
@goldenandesite 28 күн бұрын
You could add rifling to the barrel as well as the stage that rotates it.
@MatchaMakesThings Ай бұрын
Man i really hope this guy isn't my uncle and going to show up to the family annual nerf gun fight.
@lady_draguliana784 Ай бұрын
a spring loaded tension wheel for your belts may be in order
@Jessforprez 28 күн бұрын
This is the gun you pull out when you’re little brother is being annoying
@eggheadtwoSCM Ай бұрын
Bro, last time i watch this series i was at a south korean airport, then i just randomly thought of this series again and was blessed
@3DprintedLife Ай бұрын
The algorithm knows 👀
@eggheadtwoSCM Ай бұрын
@@3DprintedLife 🔥
@jeeperzcreeperzz Ай бұрын
Design the gun so it can hold 100 darts or more.. that way, it can actually fire 100 darts in a second
@gregwhite6998 Ай бұрын
Great stuff!!
@jakeyong5090 Ай бұрын
great work, most people would have given up after so long
@SynthRockViking Ай бұрын
What if you use suction for loading the ammo fast? 🤔
@NapeX291 28 күн бұрын
You could reinforce the darts so they were stronger and heavier and wouldn't bend and you could move the belt at a faster speed
@TMeier Ай бұрын
A) How is Nerf not sponsoring you, and 2) I want one of these so bad 😂
@Lemons714 10 күн бұрын
Talk about DPS!
@spiderninga9910 Ай бұрын
To prevent tumble make a rifled barrel, maybe also a longer barrel
@achilliesrun5162 Ай бұрын
Use a longer barrel with threads on the inside to guide the darts like with real guns
@micmule3395 Ай бұрын
question esspecially with removable and swappable barrels rifled barrles what would that be like in this situation
@3DprintedLife Ай бұрын
You can but it would slow the darts down. I think some nerf blasters use barrels with bearings integrated at an angle to effectively do the same thing
@e7yu Ай бұрын
Looks awesome! Hope you patent the design and then contact Nerf to license your design. 😎
@3DprintedLife Ай бұрын
Hah this is maybe a little too dangerous for kids to use...a 2kW motor spinning the massive mag at 11 revolutions/sec could definitely cause some damage!
@HavocStylesJoe Ай бұрын
12:23 DA Torque! 😲
@3DprintedLife Ай бұрын
It’s a 2kW motor :) absolutely overkill
@AbdoElectroki Ай бұрын
ive been waiting for this!!!
@yesterdaysproblem Ай бұрын
You have the quick firing, but what about the quick loading?
@masteredmello1959 27 күн бұрын
dual stage flywheels? that could improve it and also adding rifling
@luizazzi1993 28 күн бұрын
Hopefully you will come back to this project as it is so entertaining
@ryankrumenauer2806 Ай бұрын
Cool flamenwafer
@therockrancher Ай бұрын
instead of calling the semi-auto mode SNGL i'd suggest SEMI, it's easier to tell what it means
@3DprintedLife Ай бұрын
Hah yeah that’s a good point
@A_Productions 24 күн бұрын
That is awesome! Whats the significance of AA-81? Your first/last name initials and birth year or just random?
@3DprintedLife 23 күн бұрын
Haha well…AA because it sounds like and has the fire rate of anti aircraft guns and 81 because my smooth brain forgot the mag holds 72 darts not 81. But 81 had a nicer ring so I stuck with it
@SB-qm5wg Ай бұрын
Amazing work here. You're dedicated.
Comedy Club
Рет қаралды 7 МЛН
Sergio Outdoors
Рет қаралды 92 МЛН
KingStore_astrakhan
Рет қаралды 4,3 МЛН