👇WeldTube Store👇 www.weldlife.com

This guy taught me how to weld from KZfaq 🙏🏽💯 no lie 4 years ago I withdrew from welding school watched this video before an entry weld test and ended up passing all positions on first try and was offered a 1st class welder job 🙏🏽💪🏽💪🏽❤️ I appreciate you bro but unfortunately I switched industries and now build airplanes plans but I’ll never forget you changed my life bro much love 💪🏽💪🏽💪🏽💪🏽💪🏽💪🏽

“Burn learn and eventually y’all gonna earn” 💪🏽

I usually don't make comments on these kind of videos but, Thanks for the encouraging the new welders out there. As a guy with over a decade, I needed something like this back when I first hit the road. I had Jodi from weldingtipsandtricks but he wasn't like you. You can tell that you teach and probably deal with frustration from your students. Keep going bro you really are helping 💯 💪!

I’m 65 been welding for 50 years u very sharp keep up the great work and video I watch so you can remind me of all the shit I have forgotten thanks

@Weldtube if i was learning how to weld all over again, id spend money to learn from you...well spoken, knowledgeable and you take the time to explain the setups you use (rare quality)...ive been welding around 20 years but im not above learning new tricks from your posts...your page is gonna help add to the next gen of welders...thanks for sharing your time and knowledge

I have been welding for 15 years and i have never seen a guy his age have so much knowledge.... I have seen him mig, tig and stick and beautiful welds everytime this guy is very talented i always tell my apprentices to watch his videos to learn all the different procedures.

Great video. Showed this to my son who is going to a tech school for welding. Gave me some tips as well. I am bye no means a certified welder but have been stick and mig welding since highschool and you have enlightened me to a few new tricks that i can use to improve on my skills. Thank you

"We're gonna drag all the way up" Proceeds to push the entire weld

Very good video really good informational! I'm about to go do the 3g 4g flux test for work and I learn a lot from your advice, I'm going to run it exactly how you demonstrated it, so much appreciated! 💯

I'm greatful for this channel if I didn't have this I wouldn't be able to pass my test for the simple tips and tricks he taught us! Thank you very much for everything I'm working for a union and making 38 an hour doing flux !! Couldn't be more happy and blessed

I'm a beginner in this welding World but I really liked this video. Greeting from dominican republic..

No lie your one of the few that run a high setting for 3up that I’ve seen on KZfaq. Good stuff

as great as this video is, what he's not showing you: - thoroughly clean w/ a wire wheel or grinder between each pass -allow the plate to cool some between passes so it doesn't warp too much

My first weld test this Thursday and I’ve done everything but fluxcore...I think I’m confident I’ll pass. Thank you for uploading this video it has all the details & exactly what I needed to see. Wish me luck 🙏🏼

I’m in welding school right now stuck on this particular section, and I gotta say man I appreciate you for this video because it’s taught me a lot !

I really enjoy these non standard application/process videos, no one else is making this kind of content! Awesome video!

It's important to remember to let the plates air-cool in between passes. You don't want to keep putting heat in continuously and you absolutely don't water-cool it. A good temp gun is great for an AWS test

It’s nice to see a young man who wants to be the best at his craft. It SHOWS !!!

i appreciate u man your vids have gotten me thru welding school i graduate march 24, 2021

This guy is awesome honesty, from one welder to another man great tutorial 🤘

Your clearly a smart and great welder! I enjoyed this video but I was so excited for the end so I could read all the comments of people acting like KZfaq welding inspectors. I’ve been an ironworker for years now and I mostly stick but would like to be good at flux core as well. I enjoyed this video thank!

Excellent presentation Good subject matter for flux core Always keeping in mind what the WPS calls out No WPS no clear understanding of your weld qualifications testing Keep up the good work that you do In your presentations

I juts passed a weld test by using this advice, Thank You very much!

Wow thanks man I'm going for a job test on Monday for the job i found newly, and this was exactly the test i was told I'm going to meet there , and now i have learnt a lot on this VIDEO i pray 👏 that i pass the test and get the JOB BIG THANKS MAN 👍👍

Young man I have watched Your Vids keep up good vids

Wow!! thanks man, I'm going for a job test on Monday. for the job i found newly, and this was exactly the test i was told I'm going to meet there , and now i have learnt a lot on this VIDEO i pray 👏 that i pass the test and get the JOB BIG tho I was told it's 6 PASS all the same. THANKS MAN 👍👍

This was a great video. Super excited to be welding and this was so helpful

Just took this test for certification last week, it was quarter inch though. Keep posting videos. Really helpful seeing different perspectives different styles.

Sou soldador desde os 15anos,hoje tenho 59,e contínuo soldador de alumínio, barramento rígido de substaçao.gosto do teu programa.nota 10.

So nervous for this test. Glad I could watch this and learn. Thanks.

Good to see us yungstas puttin it down, I'm 13yrs n da game, mad skills young man!💯👨🏾‍🏭🔥

background noise seems fitting. 10/10 vid 🔥

Woulda been nice to actually see each bead after a pass, you just kinda jumped straight into the next pass everytime

Thanks im looking for work right now and most of the work is mig and flux core i live in katy so i hope they call been applying but it helps a lot just watching over and over again thank you

Wish I had you for an instructor.. Went to Tulsa welding school and that place is straight cookie cutter. Had a quick demo and the instructors would go wonder while you had no idea what you were doing. I've watched a ton of your videos and think "why was I told I HAD to do it that way" when I see you do something that would be more comfortable for me, and still be right. It's been a few years since I got out of the school but it put a bad taste in my mouth about the industry and didn't have the drive to become a welder after. Anyways, watching you teach is making me want to go practice again and get into again for some side projects.

Nice man. I am currently out of school right now. Personal stuff I had to deal with. But this motivates me to get back into it which I will. Love the videos!

Crazy, I always did cursive e’s but this is way easier thanks!

Love the video and your patience . Good shit it's videos like this that help people ...

Does this apply to non-flux core as well? Currently in college and struggling with doing this. I'm either to high on my beads, getting valleys, or too far over on my cap. My root pass and hot passes look really well, which is a shame that if I have one minor mistake on my cap my professor doesn't pass me which is understandable. But all the hard work, prep, and having to adjust to my environment compared to work just to not pass because 1/32" of my cap has a valley. In my booth at school I have no room to move, no where to put my arm, and the only way to get the work piece stable is a makeshift vise attached to a tube. Only if you could come visit my college and see what I'm dealing with. I'm adjusting every which way and trying to over come many mental obstacles but my brain just won't let me. Welding is my passion, love, career, hobby, and everything in between. My life revolves around welding. But I am just struggling.

Another great video my friend!

Nice stuff bro I've learned a lot off your videos, thank you..

Burn, learn, and earn I like that. Nice video thanks for taking the time to explain what your doing as you're doing it.

That's not dragging. That's pushing

Nice demonstration! I usually take a few minute break between passes.. for cool down period..

This video is going to help me so much thank you

Good tutorial with detailed information. Thanks

Excellent hards works pays off in everything’s in your life’s times

Is it not necessary to clean the flux or the slag from the previous weld bead? Edit: should have watched to the end.

That was a perfect root ...good video .. Love your work ...keep it up

Good welding boy tanks for sharing and still up loading more videos I'm an older welder but we can still learning from each other god bless you

I may be wrong but i thought flux core welding creates slag on top of the weld... if that's true, wouldn't it be better to chip away that slag before stacking a nother weld on top of it

Did you need to let the plate cool at any time during this video?

felicidades eres un gran soldador y maestro me sorprende tu capacidad de conocimiento por ser muy joven gracias por compartir tus conocimientos un saludo desde monterrey nl mexico

Nice work. I wish you success in their work 👍🏻

Can you show us how to weld with NR232 inner shield structural fluxcore wire on 3g and 4g positions thanks brother shout out from the H 🍇🤘🚀

cheers bro will be having a test today, wishing me luck bro. from Pacifica somewhere small highland :)

Where are you these days best welder ive watched on weldtube

Great video and of course u got the grinder guys in the back lol i miss school thank you for teaching

Hjalmar : “ I’m ready to burn, are you?” Me : yep

Aren't you pushing instead of dragging?

I been welding 15 year the kids is good and I love the video

Thanks for your video very nice and helpful. You're great at all your vidoes. Great info.

Do and uphill one without the backing strip, with penny thick gap

I wonder does he clean or not the weld after every pass?

Good vídeo realy helpful. Just have a question. What stettings would be a good starting point on a rootpass without a back plate?

Very helpful brotha got my first FCAW test next week, let’s roll🤞🏽✊🏽

Nr232! Next!

Bro what current to do this fcaw weld . Can you do step by step current adjust 1. Root pass 2.hot pass 3.fillpass 5.capping

Dual shield looks so nice

These videos seriously make me want to travel the 2 1/2, 3 hours every day to take your classes in Houston/Pasadena. Awesome content!

8:00 So satisfying. I'm doing this test tomorrow. Should do fine. My weakness is travel speed. Wish me luck!

The one thing I found a little confusing in this video is the terminology used. You often said to "drag", but that isn't a drag travel angle. That's a push angle. You do clearly show early on that you aren't going to drag, but push. The point you were trying to make was stringers versus a weave, but at least for me (i'm nearly through getting my welding degree) I think the phrasing used can confuse some.

You do make that look easy

Thanks bro u helped me more than any one is there anyway you can do in wire welding video with the flux wire with no gasand how to make it stronger while be when you go over and over and help me which pattern you should go

All my 3g`s were 1/8" gap, no backing plate on 1 in plate.

Do people realize your using dual sheild wire or do they think you’re using gasless flux core? The title seems like you are using flux core wire. Great video tho

Can you please do a video on mig spray transfer and go in to detail, eg. Gas mixture and wire size and so on, but none the less good video

Never welded a day in my life, but this is some interesting stuff.

Amigo los vídeos debe hacerlos en Español, ya que los que vemos sus vídeos no sabemos inglés

Which flux core wire are you using? NR-211, NR-233, NR-232 ? There are many different flux core wires and they all run different? NR-232 & 233 you point down hill and stack the weld instead of pushing it up hill like you did here. By looking at it I'd say this is 211 or some equivalent. You do know what you are doing, you are a good welder, but it would be helpful if you were a little more thorough in your explanation and consistent between what you say and what you do. example, tacking opposite corners then center, then you tacked 2 corners on the same side letting the backing strip pull up a little, also you say dragging it uphill while you were pushing, and never go side to side then you can go side to side a little as I'm doing here. I'm not trying to bash you, just give some helpful suggestions so your viewers may be able to learn a little more from you. If you are ever in Fresno, stop by AAW and say hi.

✌️💯 Brotha,I needed this extra edge of knowledge becuz I’m a beginner and I struggled with the vertical corner,etc just last week. I see now that my wire speed and Amperage was wrong!! Preciate chu!! 🤜🏼🤛🏿 I’ll do better futurely!! 🙏🏿☝️✌️

Looked good. What gas mix was you running ?

Do that on a 1" plates

Your not dragging, you are pushing.

Ok! Brother! Valeu irmão, valeu a dica na 3G FCAW! 👏👏👏

I have been welding with flux core for 2 years and yes the wind will mess up your weld everytime. Good video my weld brother

He means stringer when he says drag

“Porosity town” 😂

Nice, gonna take my 3G test tonight. This video helps so much. Wish me luck! Thanks 😊

I've never tried flux core with my everlast welder. Great welding shots.

Weldings is my passions am working so hards for to get my dreams to come To me in my life’s hards payoffs in everything’s wen you put gods firsts 📝📌🥽👉🏻📚📚🏃🏻‍♂️🏃🏻‍♂️

Ok you can weld but, maybe you should learn about flux core, the wind playes no part in porosity, with mig yes, because it needs the gas to push atmospheric away. Flux core is used by Iron workers because they can be in the wind and it still runs prefect. Nice video, other than the wind thing.

Por favor los amperajes para cada pase y la velocidad del alambre muchas gracias bendiciones...

Just found your videos ..glad I did bro

Love your videos

I'm a TIG welder for SS and exotics but now everybody wants to mig weld. I am looking for a new job and have an interview and weld test tomorrow. I wanted to brush up on numbers and movements and I'm sure I'll do well now! Thanks bro!

Took my test today and passed it easy money, started as welder and doing pipe once a week ojt not bad for 19hr.

Gracias por los consejos , y DIOS TE BENDIGA ,me fueron de gran ayuda 👍🙏🙏🙏

Hey thanks man this is great information