Hello Ahmad -- We typically recommend a non-eugenol temporary cement because eugenol is a known inhibitor to the setting reaction of resins cements. However, we also know that for some patient’s eugenol is needed. Because eugenol can be difficult to remove, we recommend thoroughly cleaning the preparation of any temporary cement residue using an oil-free pumice paste; followed by rinsing the prepared tooth or cavity with a water spray, and dry with air, cotton, or a paper tip. Thank you.

Its a cement, its not a build up material.

Hello - RelyX Luting Plus cement is designed to bond indirect restorations to the tooth structure. It is not indicated for bonding to denture materials (acrylate materials) for repairs. For further questions, more details, and full Instructions for Use please contact our Customer Care team at (800) 634-2249 option 1. Thank you!

Hi Karam, the same protocol is used for both cementation of metal-based and zirconia crowns. You can copy and paste the following link for a cementation guide: s.3m.com/w5htgc. Please let us know if you have additional questions!

You'll have to cut the temp crown off

Hello and thank you for your interest in 3M Oral Care. 3M™ RelyX™ Luting Plus is a self-cure, resin modified glass ionomer. The excess cement is best removed after brief light exposure, or during the self-curing waxy stage. Please always refer to the Instructions for Use (IFU) for complete product information. Thank you.

@@SolventumDental So you are saying that it won’t work with out the Curing light ?

Hello -- 3M™ RelyX™ Luting Plus is a self-cure, resin modified glass ionomer. Excess cement can be removed after two minutes in the mouth without tack light curing, or after brief tack light curing. You can read more through s.3m.com/fxz5kn. Thank you.

You should lose your medical license if you ever had one