I’ll try to incorporate it into more videos! I love it too

Me to man

Haha it’s not that hard if you follow the videos! Just take your time

Thanks buddy

Thanks buddy!

Thanks buddy 👊🏻

Thanks man

😆 👍🏻

I have a 2006. hard to believe its 16 years old

I have a 05 4 door long bed dullay 4x4 and I rebuilt the front end ball joints and up graded tie rod and franglais link and new bushings in track bar and brakes for a trip to Alaska and it did not need any of this to be done and factory brakes had 50% +. No rust any where was Ziebarted when new and it’ a stick white 145 k with a Bigfoot truck camper. What’s crazy I have had two guys ask me if I had the window sticker and I do and they both offered me what I payed for it and that’s crazy. Everybody wants theses no emissions trucks and if mint bring big money. Good luck on your search and no it’s not for sale.

Maybe we’ll see. I might just get it done as quick as possible though because I hate doing ball joints haha

Thanks buddy!

Is it tuned? Because it could just need a tune tweak. Or is it completely stock?

@@darkirondiesel Well it was stock when it started. I thought it might improve after I deleted it but no go. These guys around here keep saying there's no check light and can't read any codes. Wish you were closer. It's driving me crazy lol.

Haha, my headlights are Spyder, and I forget what the tail lights are but I’m pretty sure I just got them from Amazon. Personally I use timken but I don’t know much about Spyder

@@darkirondiesel Hey thanks so much man! Im finally investing some money into my truck after buying it when i was 17, Im 25 now and replacing my head gasket last December after watching some of your videos and Deboss Garage! I cant wait to see your 2nd gen smoke the tires instead of just some black smoke!

And my bad its spicer not spyder bearings

I have cooper stt pros on it now, 37x13.5r20, but they are pretty worn out. Good tires but stupid expensive. Probably go with a venom MT next time

@@darkirondiesel thanks brotha, appreciate the content

Thanks man, means a lot to me

So far it’s fine, I’m towing our boat home from the lake this weekend though so we’ll see how the EGTs are

Spyder headlights and grille came from Cole at ctcfab.ca

I don’t know I guess we’ll find out haha 😆

Hmm ya I noticed a huge difference when I put my 90hp injectors in without any tuning

That’s a little suspicious

@@darkirondiesel does it roll coal on stock tune?

It’s got a 6” BDS long arm lift with 37” tires and 20x12-44 wheels 👊🏻

@@darkirondiesel are those 37x13.5?

Totally depends on the tune, I’m not sure though to be honest

Probably 99 litres per 100km at wide open 😂

@@darkirondiesel 😁 yeah that is the reason for a proper tune. I have a TRX on order, we can race fuel gauges to empty.

Thanks for the love bro

Ya probably around there. You could call BD Diesel and talk to the sales guys, they are super knowledgeable in the correct applications for different performance parts.

Your stock turbo is where i would start get an upgraded turbo your stock fuel can handle a lot bigger than stock

Yeah honestly me too I’d probably go right off the bat with a bigger turbo, then whenever you have the funds or whenever the injectors fail just replace them with some bigger ones

thanks

@@cwg1998 thanks

Yeah I know still makes me cringe a little bit haha

@@darkirondiesel nah I get it. Just don’t do what a lot of ppl do and get the fake 6.7 tubes. Now that’s cringe lol

Oh ya big time haha

@@diesel09 so only use 5.9 tubes?

I have MM3 tuning from CCS

@@darkirondiesel i also run their tunes, my 4th gen 6,7 runs pretty good, it took awhile to get the tunes dialed in, and after it was all done i have this annoying fuel knock just off idle when i first start applying throttle, goes away at idle and goes away when getting on it, its just during light throttle......they seem stumped at DDC, any ideas?

When I met you - victoriya

Conductor special from horn blasters I think is what it is called

@@darkirondiesel does it sounds like in the video or much more like truck/train in real ?

It’s ridiculously loud. I have a video of it on my channel let me find the link for you

Here check it out haha kzfaq.info/get/bejne/rsWZgMSf35rOoqM.html

@@darkirondiesel awesome. I love it.

Yup, 90hp was the max they recommended with stock cp3

On your opinion.......my turbo is fleece borgwarner s463 2nd swap I have head studs my trans is g56 built...for size of the turbo 60% over injectors and 10mm cp3 do you think is a rout to go ??? I'm Not towing to much.....oh my dodge is 2006

Haha, the 2nd gen is getting compounds