My DREAM Workbench Build // PART 1: The Base
Рет қаралды 567,453
9 ай бұрынUse code 603X3CUSTOM to get 60% OFF + FREE SHIPPING on your Green Chef box at bit.ly/3Ov0uNZ
Plans are now available! Find them here - www.3x3custom.com/store/combi...
Check out my new LAGUNA Planer at bit.ly/3ErlIqk
To get 10% off Laguna accessories use code TAMAR10 at bit.ly/ShopLaguna (Discount only applicable for parts & accessories)
Order lumber from Woodworkers Source at bit.ly/WoodworkersSource
6-in-1 Router Jigs are back! Find them at www.3x3custom.com/store/6-in-...
Portable Router Tables are here kmtools.com/products/benchtop...
In-depth video on Template Routing here • How to Use Templates f...
For more details, check out my website - www.3x3custom.com
____
AMAZON (affiliate) LINKS
Guide Bushing Set:
amzn.to/3Lc7Y6s
Double Sided Tape:
amzn.to/3qXrrkK
CA Glue with Activator Spray:
amzn.to/44JA4Nm
DeWalt Trim Router:
amzn.to/45SNvM6
DeWalt Trim Router Plunge Base:
amzn.to/3qWdlA5
Shaper Origin:
amzn.to/45HiFGA
Tablesaw:
amzn.to/44HNvxh
Jointer:
amzn.to/3EqXahj
Miter Saw:
amzn.to/44JAi7a
Drill Press:
amzn.to/3Z7nNkI
Domino Joiner:
amzn.to/3R8vjKl
____
Get 10% off Wall Control here - www.wallcontrol.com/ use code: 3X3CUSTOM
Get 10% off custom pegboards from www.hangtimestore.com/ use code: 3X3CUSTOM
Get 10% off Mullet Dust Collector here - mullettools.com?aff=3 use code: 3X3CUSTOM
____
My Amazon Store - amzn.to/2uRpplb
_____
My Recording Equipment
Camera:
amzn.to/3r3HAC0
Shotgun Mic:
amzn.to/2rp1ETp
Lav Mic:
amzn.to/34r7Ico
Voiceover Mic:
amzn.to/2rs9TOx
___
FOLLOW
Website - www.3x3custom.com
Subscribe - / @3x3customtamar
Instagram - / 3x3custom
Facebook - / 3by3custom
_____
Links above are affiliate links, I make a small commission if you click on them at no extra cost to you. clicking on them really helps me continue to make more projects :)
@3x3CustomTamar 9 ай бұрын
Use code 603X3CUSTOM to get 60% OFF + FREE SHIPPING on your Green Chef box at bit.ly/3Ov0uNZ
@FaustoRamirezMadrid 9 ай бұрын
Hhhv
@McGehe 9 ай бұрын
Girl, the 1st 2 seconds my brain read this I thought it was gonna be for a tool and nearly choked on my chocolate milk when I saw 60%
@fdort3971 9 ай бұрын
I definitely needed a Tamar video today! Everything I tried to do today just turned to s@#£... I just about chucked my tools out the door! Unlike you I don't have a workshop yet...since I don't live alone I can't just do what I want. So I have been going around grabbing roadside "ritches " and free stuff off marketplace trying to start my own workshop and storage to start my own woodworking business repurposing items...this summer I have lost sooo much time to rain! I'd swear I live in nova Scotia but we are not supposed to have a monsoon season and I'm pretty sure I didn't move to a rain forest...sigh. I really needed the laugh from seeing you on the skateboard. I thought I was the only person who used one for a dolly! Thanks for the laughs and inspiration!
@fdort3971 9 ай бұрын
My jaw dropped when you said you sprained your ankle too! I'd spent the whole day collecting free wood and stuff with my oldest son. I pushed past my limits bcuz weather is killing my time...plus I'm excited to be preparing for my new workshop. When we got home my runaway teenager had decided to come back unannounced (we don't get along...breaks my heart). As you can imagine I was distracted...when I realised I forgot something in the car. I made the mistake of turning around on the steps. My stupid bad hip said screw you I'm done for the day! It randomly let go and down I went...my hair got caught in the fencing effectively pinning me to the ground. All I heard was awful cracking...thought for sure I broke something as it was my second fall in a month...same ankle. Over extended my left arm...😢. I would not wish my bad luck on anyone (ok maybe bad guys...lol). It's encouraging to see you and I have similar struggles and you prevailing! Gives me hope
@bobbg9041 9 ай бұрын
Congratulations, from a dusty dirty cold and hot shed (she shed?) To this updated much improved custom studio shop. Your moving up. Looking forward to more projects Like the folding roll up chair you did That didn't work out. Still a neat concept and you dont know if you dont try. Lots a new machines to work with. Thus far it all costing money. Be nice to see you making custom stuff to sell to client's getting a return on the investment. Stay small, a lot of shops went big only to hire people who had bad habits. I got lumber from a shop as he closed about 1/4 the cost he was bassicly giving it away to retire. As I was looking at what he had we found a crack pipe in his shop that looked like a magic marker. This fool was using drugs in the shop working if he'd gotten hurt on the job well you cant trust people have comon since enough to know not to be using drugs and running power equipment, the risk for serious injury is beyond imagination and the shop owner would be responsible. This is the risk you take hiring someone. And I'd fire them on the spot if I caught them doing it. No second chances and I'd be very clear about that policy.
@johndoe6032 9 ай бұрын
Looks like a great design. Ignore the people that complain about you using higher end tools. You have made many amazing projects over the years using budget tools. You have definitely earned you right to have nicer tools, and they should recognize that and that you have proven time and time again you don't need high end tools to make high-end products.
@3x3CustomTamar 9 ай бұрын
I appreciate that! And I’m really glad you see it that way. I was once a beginner who got frustrated when I saw someone use a router table to achieve something when I didn’t have a router table… so I get it. But watching those videos also gave me inspiration and goals that’s I wanted to achieve. I am proud to say I am no longer a beginner woodworker and I shouldn’t pretend to be one for viewers who are looking to get for that content. I will keep on growing and I hope ppl will come along for the ride, but if they don’t, that’s ok too ☺️
@tropaes 9 ай бұрын
Absolutely.
@leiwa100 9 ай бұрын
Wholeheartedly agree. I can't deny a sense of jealousy seeing those amazing tools that I do not currently afford. But, having followed your progress over the past several years, I know that they are all hard earned. One of the charms of your channel has always been how you figure out to do things without the special tools. Seeing the floating tenons done the hard way before bringing out the domino is appreciated.
@thegringobaker 9 ай бұрын
You could have all Festools now and if still enjoy your videos because I've watched your progression, and know from where you've come. Your shop is fantastic, btw.
@carlsmith6613 9 ай бұрын
right on, tamar…! i for one am highly impressed by the skillful way you present your woodworking videos and how much you have progressed since starting your yt channel…! there is constructive criticism and there’s deconstructive complaining; constructive criticism always wins out… complaining commenters about your shop or tools only do one thing: the complainer gives you their time; something they will never get back…! 😂 best wishes for a speedy ankle recovery…! (i personally don’t want to see a video of the twisting your ankle video… 😢)
@wmcrosbyesq 9 ай бұрын
You are without a doubt the easiest to understand woodworking teacher. Thank you for your videos.
@wmcrosbyesq 9 ай бұрын
Thanks for including your "mistakes."
@3x3CustomTamar 9 ай бұрын
Awesome to hear! Glad you enjoyed!
@edadan 25 күн бұрын
I have been a hobbyist woodworker for over 20 years. There’s no shame in having nice tools. They save you time and frustration and allow you to focus more on what you’re building vs how you’re going to build it. Anyway, very nice work and excellent video editing!
@Thorhallsson57 3 күн бұрын
Hello Tamar, my name is Örn which means Eagle in English and I live in Iceland I have be watching your work and have to say that you have very fine skills. It´s a pleasure to see you work.
@JoeMcMaster-sz9uy 9 ай бұрын
Looking great so far, you should be super proud! If you have the time, I’d vote yes to making the plans available for purchase. And yep…def want to see the ankle vid! Knowing that you’re ok means I can laugh and not feel guilty (a little bit).
@3x3CustomTamar 9 ай бұрын
Alright, noted! And yeah, I enjoy showing the video to people in real life and seeing how they react 😂
@Garrett_Brown 9 ай бұрын
I came to the comments to post this, couldn’t of said it better!
@georgecooksey8661 9 ай бұрын
Yes, plans. No, ankle vid.
@HolzVeloWaerker Ай бұрын
Really a great project . Congratulation! May i ask you where i can buy the small vice whitch you integrated in the workbench ? Thanks a lot in advance. Greetings from Germany Harry
@hazymunkey 9 ай бұрын
Never feel bad about getting better more expensive tools ect.. You worked for it and earned it thats what it's all about. It's been so fun to watch you grow and learn as we all learn right along with you.
@ingenuityartisan3091 9 ай бұрын
Facts
@PB8man 4 ай бұрын
I think most people are just irritated because influencers shove all these expensive tools in our face like they're the best thing... but they got them for free to begin with. Seems very shill-ish and very much not genuine.
@MtlCstr 9 ай бұрын
It's so cool you're building out your new shop and getting bigger and better equipment. At the same time, for me, one of the appeals of your channel was how beginner-friendly it has been. I don't want to suggest that you should hold back and not progress, I just found it so awesome that you made beginner equipment work so well. It made woodworking seem more accessible for newbies. It's great that you continue to show simpler options during your builds. Thanks for your content and keep on cracking.
@3x3CustomTamar 9 ай бұрын
I totally get it and this was probably the best comment on this topic. Usually ppl aren’t as nice… ha. I have been doing this for a while and I am no longer a beginner. Hopefully all beginner woodworkers get to the stage I am at and further as they progress ☺️
@andrewbattelini4532 9 ай бұрын
@@3x3CustomTamar- totally agree with the parent comment here, as someone who found you when looking to get into it. The great thing is seeing the progression though, rather than just ignoring all the beginner development you went through. I know it's not a "normal" theme for you, but it would actually be really cool if you put out a career breakdown video of some kind, going over the big milestones in your projects / the work that you do, the shop developments that accompanied all of those, and how the knowledge you picked up over time looks like. Not a small one, but thinking of your joint/tool breakdowns that clearly show insight to when you started using different techniques, milling your own lumber, etc. - it'd be invaluable in terms of helping folks conceptualize the journey even if they're just hobbyists (that'd be me 😅). Either way, great work again and cheers!
@3x3CustomTamar 9 ай бұрын
@@andrewbattelini4532 hmmmm. I’m not sure if I can even define those things for myself. They kinda just… happened… ha. And I guess if you watch my videos I’m chronological order you would see some sort of progression 🤷🏻♀️😂
@tsikoutsikou 9 ай бұрын
Yes, if you could prepare plans for us that would be amazing. Great job!!!
@3x3CustomTamar 9 ай бұрын
Noted!
@stefanbuscaylet 9 ай бұрын
Love the idea of plans, but really helpful for than plans would be access to the sketchup file. I inevitably want to adapt these designs and end up redrawing my own sketchup from the plans. A step I’d love to drop. Just an idea. Thanks for sharing your work and hope you’re healing well.
@craigandresen2456 9 ай бұрын
Scratch all the time for custom plans with dimensioned pieces and just make your sketch up file available. We would all make changes anyway to adapt to our needs, spaces, heights, vices, etc. Nice build!
@davidpeters8813 9 ай бұрын
Great video and a great bench! As others have said, just the Sketchup file would be perfect because we often tweak things to fit our needs/space anyway so it's a deviation from the plan.
@Dandroid61 9 ай бұрын
This is a great video. We saw you start with "cheap" tools. Now you have some really nice tools you've "earned". I love this and appreciate your work. Keep doing what you're doing. We love you Tamar!
@qapla 9 ай бұрын
Tamar, that looks like a very well thought out work bench. Since we all have our own way of working, it is good to have one designed for our individual needs and it is good you took the time to think it out before jumping into building this. By all means, breaking this build into multiple videos is fine, since it gives us more chances to visit with you while you work. Your videos are always fun to watch, as well as informative and we miss you when you don't post. Looking forward to the rest of this series. Please take care of that injury - sure we would like to see what caused it; it may help us to avoid the same type of injury.
@3x3CustomTamar 9 ай бұрын
Workbenches are so personal. I’m so excited to get to use this one
@mygardencart9060 9 ай бұрын
i've loved learning from you for such a long time. its so wonderful to have watched you build in "humble" beginnings, and to see you progress in your style, ability and equipment. thank you for breaking down your videos so a beginner"ish" woodworker such as myself can follow along and learn from you. i love your projects and your teaching. and not one to pass up wanting to see how you hurt your ankle! (only cause we know you're ok though!)
@nrmrvrk 9 ай бұрын
Such an awesome build! I love learning all of the woodworking terms for the holes, fasteners, and different cuts. I love watching the projects come together.
@7Makowski7 9 ай бұрын
Cool idea to combine bench styles, especially if space is a concern. Looks nicely built and nice and solid so far. Well done! Hope the ankle heals up soon for you
@tonyennis1787 9 ай бұрын
I think it is clever
@user-ye3jt7hv4p 29 күн бұрын
Tamar....... I can't help observing your great personality, disposition, and above it all the way you handle yourself during your wood projects. Thank you so much for sharing your knowledge and great aptitude. You even show how satisfying it is to see when everything fits the way intended. Once again, thank you for taking the time out of your day to teach us all
@chrismarshall4728 9 ай бұрын
First time I seen your work, I'm impressed, well done enjoyed every minute of it. 30yr Ironworker retired, watching you makes me realise how little effort I put into my so called wood work. Thank you and I hope your family appreciates the work you do. Well done.
@aderftard 9 ай бұрын
I like the idea of combining the workbench and assembly table onto a single base. I would be interested in hearing about the pros and cons after a few months of use.
@3x3CustomTamar 9 ай бұрын
Oh I can’t wait to be able to update you guys with that!!!
@alycynde5237 9 ай бұрын
That's kinda what I'm looking forward to as well. That's where the real gems are is post build use.
@jasonk.7534 9 ай бұрын
Glad to see you expanding your tools! I would love to see plans for this. Keep up the great work and heal up!
@3x3CustomTamar 9 ай бұрын
Thanks! Will do!
@NoOne-fe3gc Ай бұрын
So refreshing seeing someone sitting on the floor to work! Makes me feel better about drawing a square on my garage floor just so I could have a reference square to work from
@andreg.shappell1155 9 ай бұрын
Yes, plans, please! What a delight to see the progress on your beautiful shop! Thank you for sharing it with us!
@3x3CustomTamar 9 ай бұрын
You got it!
@SteveCohenPhilly 9 ай бұрын
Tamar, You are amazing! I love you videos. Informative, great designs and l love your commentary on what and why you do each step. Also like your comments on what you can or should do next time. Also, I like your willingness to experiment with new techniques and allow us to go along and see how it works out.
@outdoormaniac9951 9 ай бұрын
Congrats on the Laguna planer Tamar! Good for you! Hard work does pay off. Sorry to hear about the bad sprain. Take it easy and get it healed up soon! Thanks for another great video. Can't wait to see the next vid of this build.
@3x3CustomTamar 9 ай бұрын
The drawer video is going live tomorrow!
@wittworks 9 ай бұрын
You’re so smart. Show people the new laguna so they get so pissed off they don’t notice the Festool Kapex in the next shot. You’re a legend. I’m taking notes. Well done on everything! Love this! 🎉 congrats.
@3x3CustomTamar 9 ай бұрын
😂😂😂 🤫 don’t give away my secrets
@allendean9755 29 күн бұрын
I'm just starting to get into wood working and I must say, it teaches you patience, something I've always lacked. This was an amazing build and, very inspiring. Thank you for this!
@jewdd1989 9 ай бұрын
Tamar I’m so excited for you, you’ve worked so hard and it’s amazing to see how advanced your shop not to mention skill set and expertise has grown since you’re first video posted. You’ve used about every method there is for building complex, high quality builds and always did the best job of sharing “how to” so thank you, these upgrades are very well earned and look forward to every build in the future! Love the shop made tenons, that’s the one joinery method I’m not looking forward to learning, for some reason it seems daunting however I’ll power through it on the next build. I’ve just recently used bridle joints and half laps for a hickory vanity build but it’s through your content that aided in me having the knowledge to go about it and the courage. Is it just me or is there some kind of joinery phobia we all have to get passed?
@3x3CustomTamar 9 ай бұрын
That’s really so awesome to hear. Every single new thing I try gives me some sort of anxiety… and I have to film and post it to the internet!!! Just go for it and be safe! Always remember to cut your first one on scrap!
@felixreali7101 9 ай бұрын
Hope you'll be zooming around your workshop in no time. the workbench looks great. and it's so nice to see you edging towards 1M subs 😊
@KlayJones 9 ай бұрын
I always enjoy your videos! You're a great teacher, designer, and woodworker. Thank you for sharing your talents! I hope your family is well and that your ankle continues to heal!
@jtube713 9 ай бұрын
Yes I would love the plans for this workbench! I am in the midst of planning my workbench and this is perfect!!
@3x3CustomTamar 9 ай бұрын
Awesome. You got it!
@jtube713 9 ай бұрын
Hi Tamar, I followed your links and saw the Instagram short but no actual plans for the workbench. Is there a PDF?
@3x3CustomTamar 8 ай бұрын
@@jtube713 plans are live now!! They are linked in the 3rd video of this series
@scotttalkowski691 9 ай бұрын
Very nice build and sorry that you got hurt while building it. You should definitely show what happened, even in small work spaces you have to be careful, confined work spaces can be tricky.
@3x3CustomTamar 9 ай бұрын
Thanks! Yeah. It was just so stupid and I wasn’t paying attention to what was around me.
@vaughnmaurt5013 9 ай бұрын
Sure why not show the ankle accident…really have enjoyed your videos of your career growth. Do you have a shop tour of sorts ? I looked but couldn’t find one..I was curious how you ended up with this nice space…thanks!
@3x3CustomTamar 9 ай бұрын
@@vaughnmaurt5013 I have one from when I first moved without all my tools in…
@soultroll1 9 ай бұрын
I've built four of these for 3 different spaces. It wasn't until I saw The Founder that I really started think about movement around a space, calculating necessary range of motion, most common needs for the most typical projects that I actually got the right size bench and features. You did this better than I, VERY well done!
@williammrdeza9445 9 ай бұрын
Awesome project Tamar! Looking forward to part 2. It is great watching you continue to evolve your shop, tools, skill set, and projects over the years. I have learned a a lot from you over the years and anticipate I'll be learning a lot more from your new shop. Hope your recovery from the sprain goes well and healing comes quickly. Also, if you are willing, it would be great to see the accident that led to the sprain! It sounds like you are a good sport about sharing that.
@3x3CustomTamar 9 ай бұрын
Thanks so much! I’ll share it with a content warning as some ppl don’t want to see it
@joseedinaldo3672 9 ай бұрын
Qualidade cem porcento, legal demais.... Saudações aqui do Brasil.
@GyWO10 9 ай бұрын
Wow, this is an interesting build! Yes to plans & bloopers please!😊
@3x3CustomTamar 9 ай бұрын
👍👍
@loyalchemist7043 9 ай бұрын
Yes, to plans. Best combo bench I've seen on KZfaq. Nicely done.
@3x3CustomTamar 8 ай бұрын
@@loyalchemist7043 plans are live!!
@setphaser 8 ай бұрын
Also I LOVE that you got Free Lux planer! You so deserve it! You’re the reason I own such high quality wood working tools like my wood handled Awl (to replace the one stolen from my dad) and a few other beauties. Also yay for knee clamp, boo for not learning glue up and long pipe clamp lessons!
@jamesbrooks8984 7 ай бұрын
Hi Tamar. I have been watching your videos for years and absolutely love your work. As my daughter is also a professional woodworker you are a model and an inspiration to us both. Watching you work on this video I couldn't help but notice your current out-feed table saw situation. I used rollers for years and last year bit the bullet and got the integrated out-feed table for my Saw-stop. It is a game changer! I know. There's never enough money to buy all the tools we want, yet I'd highly recommend you give it a look. It stows away so well and has made my rollers nearly obsolete. Keep up the great work Tamar. Thrilled you're enjoying such success. I clearly remember those one car garage videos and marveling how you did so much with so little!
@drandres82 9 ай бұрын
I would love to see the plans for the entire table! Looks amazing so far
@3x3CustomTamar 9 ай бұрын
On it!
@pavementhum 9 ай бұрын
Thank you. How did you attach the tops to the base?
@3x3CustomTamar 8 ай бұрын
@@pavementhum that video is live today!
@patsipes6561 9 ай бұрын
Another great video. You are just plain fun to watch as your skill keeps growing. It definitely encourages me. Plans would be nice. How do you decide what you need in the build and how do you decide to put it together? I vote No on the ankle sprain. I dont like to see people get hurt, especially virtual friends. 😢😊 I hope you fully recover soon!
@3x3CustomTamar 9 ай бұрын
Glad you liked it! Noted on the plans and the injury video. Ha
@watchyour6398 9 ай бұрын
After my 40's I'm starting in the hobby, and searching on YT I found this girl, and OMG, she's a beast! All my admiration and gratitude to her. I have learned a lot from her content. I wish her all the success in the world in her career and personal life. Thank you!
@3x3CustomTamar 9 ай бұрын
☺️☺️☺️
@kylercote1 9 ай бұрын
I've been running the 3m xtract sander for about 6 months now and love it. My old was trash but so far zero complaints. Just need to remember to power down when down using. Beautiful bench too! I think this is my new favorite :)
@3x3CustomTamar 9 ай бұрын
The loud banging noises scared the crap out of me when I first turned it on. Ha
@tree_carcass_mangler 9 ай бұрын
I'm really looking forward to part 2. Your collection of high end tools is, in part, a reflection of your growth as a woodworker. So be proud of how far you've come. Thanks for all you post, and for all the education you provide basically for free, here on the 'net. Thumbs up
@tree_carcass_mangler 9 ай бұрын
Oh and yeah, I'd like to see footage of the accident. It's for safety's sake, of course. We all want a heads up on unexpected shop hazards....right!
@3x3CustomTamar 9 ай бұрын
Working to get the next video out! 👍👍
@YourResidentSerb 6 ай бұрын
Ive just started woodworking and I have been watching a lot of your older videos. Its great to see what you made with those and how you evolved your shop. Dont let the haters get to you about all the pro tools you have now. To me, you put your time in and earned them all the while helping new guys like me learn along the way. Id love to see the plans to this bench, something to aspire to in the future as I upgrade my 2x4 pine top! Thanks for all you time in making these videos
@3x3CustomTamar 6 ай бұрын
I have been doing this KZfaq thing for a while now. I’m pretty hardened to any negative comments. Don’t worry about me. Ha. So glad you like the bench! Plans are now available
@sickwilly1171 6 ай бұрын
Im a retiring metal worker. Setting up to work with wood now, building my bench now, drawn on sketchup, a great tool. Your bench is looking great. Very good craftpersonship. 👍
@studiogerk 9 ай бұрын
Sorry to hear about your ankle, glad you're taking care of it! Also glad to see you with all the new higher end tools, your work behooves this! And yes once you move away from straight knives there's no going back! Keep it up Tamar!
@3x3CustomTamar 9 ай бұрын
Such a difference in finish quality!
@alothaiqi 9 ай бұрын
I wish you a speedy recovery. An innovative workbench, a wonderful plan and wonderful execution.
@3x3CustomTamar 9 ай бұрын
Thanks so much!
@pejmanjavaheri9758 8 ай бұрын
Amazing craftsmanship with every build! Simply incredible wood working!
@ArachnidOz00 9 ай бұрын
I love your videos, Tamar! I love that you’ve got great new tools. I feel like we’ve been along on your tool journey with you. The thing I love about you is that you’ve always worked with what you’ve got and you talk about the tools you’re using in detail.
@3x3CustomTamar 9 ай бұрын
Awesome to hear!
@davidforest-hill6284 9 ай бұрын
Surely it's the end product and the journey there rather than what you use to achieve that goal. And who wouldn't use the best tools they can have? People should appreciate the fact you're sharing your passion and making great content. As long as you keep posting we will keep watching and learning.
@3x3CustomTamar 9 ай бұрын
Awesome to hear ☺️
@johnsnider3400 9 ай бұрын
I love watching you make things, because I find that you have an incredible eye for detail, aesthetics, and form and functionality combine so well. Hope that ankle heals up and you get back to full speed!
@3x3CustomTamar 9 ай бұрын
☺️☺️☺️ thanks!
@user-yd4xn6tf2t 9 ай бұрын
Great to see you building your shop and business. I remember when you first started out with entry level tools, working in a coat and tuk. Always loved the way you explained your project builds with no ego just a love for woodworking.
@3x3CustomTamar 9 ай бұрын
Glad to not be freezing anymore. Ha
@augustsilva9423 7 ай бұрын
This is EXACTLY what I have been contemplating for over a year! I love your design and logic behind your choices. Thank you for the motivation to start building my hybrid workbench!
@3x3CustomTamar 6 ай бұрын
👍👍
@apowell389 9 ай бұрын
Tamar you are just so talented and provide great content.
@DomingoFreire 9 ай бұрын
Congratulations, you always make a good job....!!!!
@3x3CustomTamar 9 ай бұрын
Thank you! Cheers!
@terrynicklin417 9 ай бұрын
Beautiful work and nice design! I must admit I groan though when I hear people complaining about 'not having space'. Try working in a typical UK garage or shed that's 8 foot by 12 foot! And that's before allowing for the family bikes etc.
@Sparky_Mark 9 ай бұрын
You’re an inspiration for me and my videos 🥹 Can’t wait to build a bench like this.
@brian_bielanski 9 ай бұрын
You are one of the best educators on KZfaq. Really appreciate your laid back, show-it-all approach. Keep it up!
@3x3CustomTamar 9 ай бұрын
Awesome! Thank you!
@dianeewoldt3035 9 ай бұрын
I use floating tenons for most of my door making joinery and also make my own tenons. To allow for glue squeeze out I route a very shallow groove down both faces of my tenons with a 60 degree V groove bit. This prevents any hydraulic action when gluing up stile and rails. LOVE your bench design!
@3x3CustomTamar 9 ай бұрын
That’s a great idea!
@sarahhamilton5879 3 күн бұрын
So great. You make it look so easy! Hats off!
@RustyCas999 9 ай бұрын
Tamar, you’ve absolutely earned your success. You are one of the best teachers on YT and are so humble and genuine. I feel sorry for the haters - theirs must be a miserable existence. We all love you and will always support you!
@3x3CustomTamar 9 ай бұрын
☺️☺️ awesome to hear
@kevinmeachem2138 9 ай бұрын
Great work! Anxious to see the next phase.
@lizzytgolf1 9 ай бұрын
First yes on both the plans and the sprain…keep in mind letting it heal now will keep it from hurting 10 years from now!!! Be patient Also since your first video you have always said “there are ways to make anything using the tools you own not the ones you’re waiting to own. Don’t wait for the perfect shop/tools to build you can gather as you go!” I love your videos I learn something every time…you are a great teacher! Thanks for sharing your skill and knowledge.
@3x3CustomTamar 9 ай бұрын
It’s so hard to rest and let it heal…. Glad you learn something every video!
@sailnut55mc43 9 ай бұрын
Yes please on the plans! This is one of the best designs, in my opinion, among the several already out there! Thank you!
@3x3CustomTamar 9 ай бұрын
Awesome to hear! On it!
@jimrosson6702 9 ай бұрын
Great video can’t wait to see it finished looks like an amazing workbench. So sorry you got hurt building it hope you get better soon. It’s been amazing watching you grow as a woodworker and see all your amazing builds and your skills get better and better it’s been great and you should not feel bad about having great tools you have earned each and everyone of them with all your hard work. Keeping up the amazing work.
@3x3CustomTamar 9 ай бұрын
👍👍👍 thanks so much!
@threesteaks 9 ай бұрын
The bench is looking awesome so far! What a bummer about your ankle. Injury setbacks can be very frustrating. Also, it's awesome seeing your shop filling up with all of these amazing new tools! It's cool to see how far your shop has come from no jointer and a jobsite table saw to what it is today. All that hard work is paying off!
@3x3CustomTamar 9 ай бұрын
Thanks so much! That first time using the jointer was one very exciting moment. Ha
@RussWilsonII 9 ай бұрын
Yes, PLANS! PLEASE PLEASE PLEASE!!
@EvanDunville 9 ай бұрын
Really cool idea for a bench and its looking great so far. As you were describing the planer issues i was actually thinking why not upgrade and wow that laguna one looks nice. Thats the first i have seen that model.
@SteveBla-xc9bc 9 ай бұрын
Good to see you upgrade you shop and tools! I have been impressed how you do such awesome work with modest stuff. God speed.
@3x3CustomTamar 9 ай бұрын
Thank you very much!
@danielholt4543 22 күн бұрын
Beautiful start to what I'm sure will be a fantastic bench. Thanks for sharing.
@davidmata5080 7 ай бұрын
Smart to replace that planer. Better safe than sorry. Yes please share the ankle injury video. I think your outtakes/deleted scenes are an excellent addition to your videos. The work table looks great!
@tehawk6074 8 ай бұрын
I love this video series. Great job!! You are so well organized and come up with some great projects. Thank you so much.
@user-ww2ih9hs4t 8 ай бұрын
Everybody has to experience love when they are young.There are love and joy,but never eternity.
@Craftlngo 9 ай бұрын
get well soon, Tamar! This is an awesome looking Workbench and I'm a bit envy of all the space you have now for working on your projects.
@3x3CustomTamar 9 ай бұрын
Thanks so much! ☺️
@musicbydavidsmith 9 ай бұрын
You’re such an inspiration, Tamar. It looks so stylish with those big, sharp edges and I really like the idea of a double-sided bench. The simple, obvious solutions are sometimes the hardest to figure out but always the best. Awesome stuff. I’d love to see the plans as I always learn so much from actually seeing on paper how things get put together, but as a survivor of several bad ankle sprains from childhood I’ll skip the triggering footage 😅
@misterikkit 9 ай бұрын
That's a fine looking workbench that will see a lot of use over the years. I bet it will never get old having that in your shop.
@3x3CustomTamar 9 ай бұрын
I keep walking in and smiling.
@augustineschaefer5522 9 ай бұрын
From my first box joint to your amazing builds that ‘click’ into place is one of the most satisfying sounds ever. Thanks for building
@3x3CustomTamar 9 ай бұрын
Really felt soooo good!
@bumbletastic 3 ай бұрын
I just went back to watch your tutorial on milling rough cut lumber, and so happy to stumble on this to see the upgrade! Your shop is definitely **goals**
@3x3CustomTamar 2 ай бұрын
It’s really been awesome to make this space my own!
@seantaylor6691 9 ай бұрын
As someone who is just starting out his journey, I love your content. I'm currently rocking a Ryobi 10" tablesaw and my outfeed is a spare door the last owners left on some almost equal 2x4 legs from everyone's favorite orange big box store. I love this design very much. If you do end up making plans, I would definitely buy them and if you don't, I'll probably try to aim for a similar (if maybe slightly less complex) design myself. Keep being awesome!
@3x3CustomTamar 9 ай бұрын
Awesome! We all started with similar set ups!
@calabazasbike8863 8 ай бұрын
Lots of work, and fun!
@Laoren69 9 ай бұрын
yes for plans, no for video of accident. your work is really tidy and beautiful, and I havent found many other videos which demo step by step process in such clear and teachable terms. I am off the tools for now and have a back injury, but really want to build a similar bench as well as a jewelers bench and a drafting table. I like the old school approach to tools and you got real style.
@3x3CustomTamar 8 ай бұрын
Got the plans on my website this morning! Hopefully you feel better soon!
@TheTomporter Ай бұрын
Love the combination approach of an old school workbench and assembling table in one. Just frustrating to live in Europe and have fewer options for high quality wood - that Maple looks fabulous.
@simong-uk 8 ай бұрын
I've been planning a workbench for a few years, I have it all drawn up in CAD and have already bought much of the hardware for it (Benchcrafted tail and leg vise) your video got me thinking I should make a start this Winter . . . I have money set aside for the hard maple. Thanks for the kick 😉
@sq3971 9 ай бұрын
I feel your pain! I broke my left ankle several months ago and I am still wearing an ankle brace. Nice work on your new work bench, as usual.
@BoydenWD 9 ай бұрын
Really sweet design! I like the integrated cabinet and that plywood snapping into place is so satisfying 👌 can't wait to see it all wrapped up!
@3x3CustomTamar 9 ай бұрын
Best feeling in the world!
@nigelwarner1497 8 ай бұрын
Ive been planning a new bench for lost of this year..what you're doing here is very informative and very watchable..many tks for this, it looks great 👍
@cliff5240 9 ай бұрын
Nice use of the skateboard. That is a great-looking workbench, almost too nice to use. You have come so far since I first started watching you several years ago -- I love all of the new tools you have added to your shop, it is so exciting to when those new tools come along, you deserve everything you have, hard work pays off!! Keep the video coming and best wishes on a speedy recovery.
@3x3CustomTamar 9 ай бұрын
Thanks so much! Posting the next one tomorrow!
@SeanGriffinthemusicalchef 6 ай бұрын
Wow! This is so impressive! Inspirational!
@hsjawanda 9 ай бұрын
Hope you recover from your sprained ankle soon 🤞🏼. Back in school/college I'd have advised you to "walk it off" (this recipe has literally worked for me many times), but since then I've learnt that that is not always the best solution. Love your videos for your smart solutions.
@AbdicateDotNet 9 ай бұрын
We all like to see folks be human... show us the footage of the great twist. Great work on the workbench!! ❤❤👏👏
@inspiringbuilds 9 ай бұрын
Well planed and nice sturdy workbench! Congrats on the new tools as well, hope you have a speedy recovery. 👍
@MCsCreations 9 ай бұрын
Beautiful work, Tamar! The workbench is looking amazing!!! 😃 Looking forward to the next part! And get better soon! Stay safe there with your family! 🖖😊
@3x3CustomTamar 9 ай бұрын
Thanks so much!
@martinholden2281 9 ай бұрын
Amazing attention to detail, I think your work table will serve you well, Tamar. Take care of that ankle, and stay on the mend.
@ricardosilvamtl 9 ай бұрын
Hi Tamar! That's a great project, it's beautiful! I've been following your channel since your small cold workshop. I'm very happy to see you progressing in your career, and what you have achieved. You deserve it, you are a very nice person and professional. I'm sad about your ankle OMG, it hurts. I hope you will get better fast and have a good recovery. 😊 I can't wait to watch the other parts and see the plans. You are the best! 🙌🏻 I wish you all the best! 😊 Take care of yourself 😉
@3x3CustomTamar 9 ай бұрын
Thanks so much! ☺️
@vinceagnes 9 ай бұрын
Wow, what a great project. It’s not to often that woodworkers take the time to make “furniture” for our shops. Sure is great to have a solid bench! I made a classic woodworker bench about 25 years ago and have appreciated it ever since. Your bench has many features that I wish I had included when I built mine Great job!! I would like to see your video of your ankle incident.I had a twist/turn ankle injury two years ago that took me out of the game (and led tosurgery) I wish you completely recovery!
@3x3CustomTamar 9 ай бұрын
Thanks so much! I’m excited to put it to good use! I really hope physical therapy will prevent needing surgery
@singhivan 9 ай бұрын
Hi Tamara. Greetings from South Africa 🇿🇦. I wish you a speedy recovery on your ankle sprain. Wow, this bench looks amazing. The center dividing section is an awesome idea. Can't wait for the next video..... .. no pressure since you are not fully mobile. ✌️
@3x3CustomTamar 9 ай бұрын
Thanks so much! I was very excited about this idea
@markswenson1194 9 ай бұрын
This is definitely on of the smartest designs for people with space issues. Very well thought out and your skill level definitely shines through! Keep doing what you're doing.
@3x3CustomTamar 9 ай бұрын
So happy you think so!
@dcuccia 9 ай бұрын
Speedy recovery!
@romeoC9968 9 ай бұрын
Great to see you back. Can't wait for the rest of the build video.
@3x3CustomTamar 9 ай бұрын
Posting the next one tomorrow!
@shigthehandyman 9 ай бұрын
I love your reaction when that top shelf pops into place…and yes, such a gratifying sound! In regards to your questions: - yes, I would love the plans for that workbench - no, I don’t want to see you twist your ankle! You are the best Tamar…love your content!!
@3x3CustomTamar 9 ай бұрын
Such a good feeling!!
@ejoyner 9 ай бұрын
So happy to see you able to enjoy the fruits of all your labor! I recently purchased a Laguna F2 tablesaw so I can cut some hot dogs for beanie weanies!lol Enjoy the new tools, you've earned it! Beautiful bench, looking forward to the next video!
@3x3CustomTamar 9 ай бұрын
👍👍👍
@Sailor1010 6 ай бұрын
Not only has your tool collection improved but so has your video quality. Looking forward to watching more. Also, I just signed up for Woodworkers Source.
@barbaracipiti9056 9 ай бұрын
I absolutely love your techniques and videos! Beautiful bench and great organization!
@3x3CustomTamar 9 ай бұрын
Glad you like them! Thanks!
3x3Custom - Tamar
Рет қаралды 230 М.
Third Coast Craftsman
Рет қаралды 6 МЛН
Vfx Sanatani
Рет қаралды 12 МЛН