No video

4,000 Surge Watts Dual Fuel Generator PLUS Welder GEN4000DF-STW

  Рет қаралды 1,889

Buffalo Corp Store Official

Buffalo Corp Store Official

Күн бұрын

www.buffalocor...
This combination generator can give you the necessary power for DIY and light construction jobs. With the flexible dual fuel option, plus the ability to use the stick welder feature, you can count on the generator to help get the job done.
• 4000 Surge Watts / 3500 Running Watts
• 4 Stroke With AVR
• Recoil Start
• 212cc OHV Engine
• 3.2 Gallon Fuel Tank
• Runs 9 Hours @ 50% Load (GAS)
• Runs 12 Hours @ 50% Load (LP)* on 20 lbs of LPG Fuel
• 4 x 120 Volt A/C Outlets
• 1 x 120 Volt RV Outlet
• 1 x 12 Volt DC Outlet
• INCLUDES STICK/TIG READY WELDER
• 120 Volt ARC Welder
• Inverter IGBT Technology
• MAX OUTPUT: 85A/23.4V @ 20% DUTY CYCLE
• Includes Electrode holder and Earth clamp
• Face Mask with Vision Filter and Brush & Hammer
The HIT 4000 Surge Watt Dual Fuel Generator Plus Stick Welder is TIG Ready! It has everything you need for the job in one package. A 3500 Running Rated Watts generator is combined with a 85 Amp Stick welder provides flexibility and convenience in a single unit.
First of all, it has 4,000 peak watts and 3,500 rated watts. This is a powerful Dual Fuel Generator that can handle the needs of most contractors, homeowners and recreational activities. Secondly, it is equipped with four 120 Volt outlets and a single 120 Volt RV outlet. Plus there is a 12 Volt DC outlet for battery charging. This generator can handle almost everything you need at the job site. Utilizing either unleaded gasoline or propane gas, so you can use fuel that is easily available or affordable. Finally, it provides the long lasting, clean burning advantage of propane gas.
You will find this Stick Welder is easy to use! It’s portable and is ideal for light duty welding at home, on the farm, or at the shop. For better welds and consistent output, the 85 AMP 120V welder is inverter powered from the generator. This will allow it to manage fluctuations in input power for better welding and dependability. Use 1/16, 5/64, or 3/32 inch electrodes to weld mild steel, stainless steel, cast iron, and hard surfacing.
Call Customer Service if you have any questions, Monday-Friday, 8 am - 4 pm, 636-532-9888.

Пікірлер
Dad Makes Daughter Clean Up Spilled Chips #shorts
00:16
Fabiosa Stories
Рет қаралды 1,7 МЛН
黑天使遇到什么了?#short #angel #clown
00:34
Super Beauty team
Рет қаралды 47 МЛН
When A Gang Leader Confronted Muhammad Ali
11:43
Boxing After Dark
Рет қаралды 7 МЛН
Can an 18th Century Battery Charge Your Phone?
15:55
How To Make Everything
Рет қаралды 769 М.
Running a Lincoln Ac225 Welder With A Generator
9:36
TopQuality IronWorks
Рет қаралды 32 М.
smallest gas welder generator on amazon cheap will it weld
27:32
radical repairs
Рет қаралды 1 М.