No video
#4 New Toy! 55” Wicked Root Rake Grapple: Clearing Downed Tree
Рет қаралды 53,102
4 жыл бұрынIn this video I continue to test out the new Everything Attachments 55” Wicked Root Rake Grapple and it’s ability to move brush and wood while cleaning up a fallen maple tree I found in the back.
GET SAWHAUL HERE: www.gearhaul.com/collections/...
Featured Equipment:
- Kubota L3901
- Everything Attachments 55” Wicked Root Rake Grapple
- Stihl MS 290 Farm Boss
- SawHaul Complete Kit for Tractors
- The Mingo Marker
Protective Eyewear of Choice:
- Pit Viper Double Wide “Leonardo”
#kubotausa #mykubotacan #kubotacountry #stihl
#everythingattachments #sawhaul #pitviper
@danielsmith1690 3 жыл бұрын
Great vid!
@DudeRanchDIY 3 жыл бұрын
Thanks Daniel!
@sunjaybedi4389 3 жыл бұрын
Thanks for the video, enjoyed it. Just moved into a new house and picked up a 2016 tractor with 43.5 hours on it.
@DudeRanchDIY 3 жыл бұрын
Glad you enjoyed it Sunjay be sure to subscribe for more! Congrats on the new tractor! What did you get?
@sunjaybedi4389 3 жыл бұрын
Dude Ranch DIY , I got a Kubota mx5800, with a 72” loader bucket, brush hog and snow blower. Had it already on the back meadow to carve a few trails for the neighbors horses and for us to enjoy a walk.
@DudeRanchDIY 3 жыл бұрын
Very nice! A brush hog is next on the list of attachments I want to get!
@Raymo853inLeDroit 3 жыл бұрын
When you picked the three bucklings at 9:45, my thought turned to appreciating your proper ballasting.
@DudeRanchDIY 3 жыл бұрын
That ballast box is great, nice and compact, although I would like to fill with concrete and create some storage for hand tools similar to “DIY My Way” did to his... Unfortunately doesn’t get much use, as of lately the chipper has mostly been attached acting as rear ballast!
@itsruf1 3 жыл бұрын
@@DudeRanchDIY It's not heavy enough. You might damage your front wheel bearings. I don't expect homeowners to know but you should lead them.
@jconaty3 3 жыл бұрын
@@DudeRanchDIY which ballast box is that? part number?
@subixbarbarasson6052 Жыл бұрын
I really dig your presentation. Even the musik is tolerable. You illustrate tall respekt for safety and approach. Well done. Happy Thanksgiving and merry Khristmas. From NorKal, USA Salute. Sübix - Edit; Hey i totally subbed aswell. :)
@DudeRanchDIY Жыл бұрын
Thanks for watching!
@justingoodrich2519 3 жыл бұрын
That Mingo Marker is pretty trick
@DudeRanchDIY 3 жыл бұрын
It works really well for long tree trunks!
@gh50hill1 4 жыл бұрын
Enjoy your videos. Just wondering how long you have had your L3901 and what your thoughts are on it.
@DudeRanchDIY 4 жыл бұрын
Thanks! I’ve had it about 3 months now and have put just under 60 hours on it and have been loving it. I primarily bought it to use for my tree work but I end up using it for everything, and it makes even small tasks all the much easier...
@stevenshuford5829 3 жыл бұрын
And also the gravel bucket?
@stevenshuford5829 3 жыл бұрын
Need to sharpen it now.
@paullandry8301 3 жыл бұрын
I noticed your chain saw is mounted on the side of the tractor. I find that very interesting. Is that something you patented because I have never seen that before. With the grapple we have no place to keep the chain saw.
@DudeRanchDIY 3 жыл бұрын
Oh how I wish I held the patent to that...! The scabbard I’m using is actually called a “SawHaul” and they offer many different mounting options for tractors and utvs. I will add a link to the description of the video!
@greatlakespowerstrokefx4 2 жыл бұрын
@@DudeRanchDIY first thing i noticed. Im glad you shared the name, im ordering one
@TimDeGraff 2 жыл бұрын
What chainsaw bracket are you using on the side of your tractor? Got a link or model to share?
@DudeRanchDIY 2 жыл бұрын
That’s the SawHaul scabbard, www.gearhaul.com
@davidcomunal7798 3 жыл бұрын
What size / model kubota are you using. Thx
@DudeRanchDIY 3 жыл бұрын
It’s a Kubota L3901 39hp tractor
@yellow3222 2 жыл бұрын
Would this grapple be good at raking Leafs and compost out of the forest?
@DudeRanchDIY 2 жыл бұрын
It would definitely work for that application, however it would probably rake out other things as well! It is very good at getting down to bare ground!
@barNranch 3 жыл бұрын
Is there any value in chipping or mulching branches instead of burning?
@DudeRanchDIY 3 жыл бұрын
I chip most of the brush I end up cutting, depends how clean the brush is. Don't want to send a rock through the chipper!
@barNranch 3 жыл бұрын
@@DudeRanchDIY just had two monster 70’ 56” base taken down today. Time for a tool shopping trip.
@stevenshuford5829 3 жыл бұрын
Just kidding. I bought a Kubota 2501 and looking for a 55 wicked grapple. Where did you pick yours up at?
@DudeRanchDIY 3 жыл бұрын
I ordered the wicked grapple directly from everything attachments. I believe they have quite the lead time on them now, something like 12 weeks... the bucket, pallet forks, ballast box, and third function valve I just got directly from the dealer when I bought it.
@thegreatnorthwoodswithbb6513 2 жыл бұрын
I notice a lot of videos with guys with grapples seemed to lift front of tractor off the ground a lot just wondering if that's intentional?l or just putting too much down pressure? When I run mine I don't try to put so much pressure on the grapple
@DudeRanchDIY 2 жыл бұрын
I’m assuming you mean when using it as a root rake? I apply the pressure at times to try and dig roots and rocks out of the ground.
@thegreatnorthwoodswithbb6513 2 жыл бұрын
@@DudeRanchDIY no I mean when doing a simple task like just picking up brush
@DudeRanchDIY 2 жыл бұрын
Yeah I think that’s unintentional and due to lack of experience! This obviously was one of my first videos ever and with the grapple so any instances of me lifting up the tractor was due to my lack of familiarity with the machine and attachment! I think if you watch some of my more recent videos featuring the grapple you will find I’ve become much more proficient at using it!!
@thegreatnorthwoodswithbb6513 2 жыл бұрын
@@DudeRanchDIY I watched a few of your videos I'll watch a couple more
@DudeRanchDIY 2 жыл бұрын
Great! Hope you enjoy BB! Thanks for watching!
@otisbailey5455 Жыл бұрын
Would have liked to had a better look at your chainsaw holster. Great video, in process of purchasing a grapple for my rig.
@DudeRanchDIY Жыл бұрын
It’s a “sawhaul” decent product if you dont feel like making one yourself.
@otisbailey5455 Жыл бұрын
Thanks, I made one.
@brianlawson9167 2 жыл бұрын
Is that the kubota 3rd function or aftermarket?
@DudeRanchDIY 2 жыл бұрын
Kubota, installed at dealer.
@hadtohabbit1496 Жыл бұрын
What chainsaw attachment is that on loader arm
@DudeRanchDIY Жыл бұрын
It’s called the “saw haul” link in video description
@austindavis3099 3 жыл бұрын
Is that a ms290
@DudeRanchDIY 3 жыл бұрын
Yes it is!
@cjm3508 2 жыл бұрын
You need a wood chipper!
@DudeRanchDIY 2 жыл бұрын
I have 2!
@angryman71 Жыл бұрын
Or, make a cut, and then move your 20" bar to the side, and make another cut at the end of your bar.
@itsruf1 3 жыл бұрын
observation: Why is it there are countless videos for a grapple hook for tiny Kubotas? Hell, just pick up the twigs by hand and stick the twigs in a garbage can.
@DudeRanchDIY 3 жыл бұрын
If I could pick up 500+ pound logs I absolutely would!
@itsruf1 3 жыл бұрын
@@DudeRanchDIY You or the tractor? Get it? Hard to tell with 480p.
@DudeRanchDIY 3 жыл бұрын
@@itsruf1 The video is available in 1080p
@inthedarkwoods2022 3 жыл бұрын
Enough with the "like and Subscribe!"
@bighammer587 3 жыл бұрын
You’re doing it wrong; Your chainsaw methods are not advisable! Cool tractor though
@DudeRanchDIY 3 жыл бұрын
What am I doing wrong Mark??
@bighammer587 3 жыл бұрын
@@DudeRanchDIY Well, your first cut on the log was textbook. @7:05 No problems there. But for some reason after that you kept doing the plunge cut @7:35 That type of cut isn’t normally used for bucking logs. There’s no need for it; plus it’s a lot of extra wear and tear on your front sprocket, and you’re more likely going to get your bar pinched in the log, as it looked like what happened. Nice video though 😅
@DudeRanchDIY 3 жыл бұрын
@@bighammer587 yep did a plunge cut for two reasons, I didn’t want the piece to tear, and you can’t see it in the shot but the tips of the tree were still on the ground, various forces at play, hence the plunge cut to take some pressure off and then snap the top and bottom strap 👍🏼
Hamiltonville Farm
Рет қаралды 41 М.
SometimesBuilds
Рет қаралды 9 М.
Zin2D
Рет қаралды 77 МЛН