40HP $2,000 Ultimate TWIN Motor RC Speedrun Car! Vision Revealed!

Рет қаралды 68,713

Күн бұрын

A $2,000, 40+ Hp RC Car?! TWO Speedrun Motors and TWO XLX2 Esc's! I built a Vision of my ULTIMATE speedrun RC car! Testing out the ALL NEW Innovation RC Edition Batteries! How well does Vision do? Watch the video to find out!
* Innovation RC Edition BATTERIES by CNHL! *
👇 👇
chinahobbyline.com/collection...
Music by: "Pop Rocks" by Aultar- @Slip.Stream.com
*Donations! Everything is used to support the channel and bring new projects for your entertainment! Everything is appreciated!
👇
PayPal: Brandonmp7@gmail.com
(I seriously appreciate any of those who do so, it helps keep content coming along, quicker)
Links to other Innovation Projects!
Shockwave: 👇
• Jet Typhon 200+ KMH/ H...
TwinTurbo:👇
• RC Jet car! "Twin Turb...
Juggernaut:👇
• 100+ Mph 1/5 Kraton 8s...
Hover: 👇
• "Hover" Twin 70,000 Rp...
StormBreaker: 👇
• Arrma Talion Active Wi...
* Follow @InnovationRC on Instagram!
Special thanks! 💯🎉
. ChinaHobbyLine Batteries (CNHL)
. CustomRCUpgrades (CRCU)
. Castle Creations
. Gone Banana's Racing skinz "Rick Seffrood"
#InnovationRC
#arrma
#arrmarc
#horizonhobby
#chinahobbyline
#CastleCreations

Пікірлер: 253

@InnovationRC Жыл бұрын

Check out Innovation RC Batteries here! Thanks for watching! chinahobbyline.com/collections/innovation-rc-series?ref=LM9JnF68TkdSj4

@MatrixRC Жыл бұрын

Keep up the awesome job 👍🏽💯

@InnovationRC Жыл бұрын

@@MatrixRC thank you!

@nutsnbolts4601 13 күн бұрын

I’ve never seen anyone pull a trigger like this man it’s crazy how nice this guy drives

@vicdez Жыл бұрын

Brother you need to tape down the sides on that body. That Protoform Corvette body is too thin on the sides and they always open up like wings. Speaking of wings maybe more rudder less elevator.

@InnovationRC Жыл бұрын

Thanks for the input! So the wing is the same one on Spartan that's been over 150 many times. I think it was just the heavy wind it was going up against. Suspension setup is the same as well. Usually never run in this crazy wind

@minter_fab_mafia Жыл бұрын

I agree with the body tape. Keep it all tight to the chassi

@routeddown66 Жыл бұрын

@@InnovationRC I'd also go as far as to say that you may be getting a high pressure zone building up in the wheel well. And some Porsche like aerodynamic trickery may be needed. You may want to get a good leaf blower and a slowmo camera to setup an impromptu wind tunnel and see what is flexing and moving around to identify areas that need to be stabilized. Like just the shear power of the air going near 130-150 is absolutely insane.

@joshchatwin8569 Жыл бұрын

This to

@xXB.FunkXx 11 ай бұрын

I ran that Corvette body and he's right, tape those sides because they like to flap and I had to get the nose as close as I could to the ground so it wouldn't do backflips. Wasn't my favorite speed run body.

@MrGridStrom Жыл бұрын

Such a beast of a car, my heart sank when it flipped. Keep it up and work out that aerodynamics. Watch out Raz and Kev LOL

@501speedcrew9 Жыл бұрын

Watch out Raz. LOL.

@DESOUSAB Жыл бұрын

@@501speedcrew9 C'mon - there is nothing more to this speed running business than simply adding more power... ;)

@501speedcrew9 Жыл бұрын

@@DESOUSAB That why we are 1 of 3 to break the 200 MPH mark.

@DESOUSAB Жыл бұрын

@@501speedcrew9 🤭👊

@earlmoorhead5555 Жыл бұрын

Scary when they take flight cool video

@integrityrc7356 Жыл бұрын

Awesome again. You are one of few that truly tries and don’t give up. Love your work my friend.

@orangemound135 Жыл бұрын

Wicked build...glad to see another of your videos 📹. Vision has alot of hp..130's no problem...gonna check them batteries out.. Awesome work as usual 👏 👌

@rctezluh42069 Жыл бұрын

crazy build dual motors and stunning to look at!!! upvoted!!!!!!!

@DESOUSAB Жыл бұрын

Lots of very interesting stuff in this video. Great job!

@HAPPYJACKRC Жыл бұрын

That is Awesome 👊🏽💯. The power is wicked brother

@ruffriki3264 Жыл бұрын

Wow! That car has incredible potential! I’m very happy it wasn’t badly damaged!

@m.p1976 Жыл бұрын

So great!!! Amazing!!

@rcusa201 Жыл бұрын

Welcome back!!! That was all wind to blame nice set up!!!

@frankiep2314 Жыл бұрын

Awesome video can't wait to see more awesome run awesome job on invision looks awesome and stay safe

@Gavs_rc_hobbies Жыл бұрын

Thats a really awesome build. 👌🏻👍🏻

@andrewwhiting5526 Жыл бұрын

Nice first pass, wasn't expecting to see that happen in the second pass luckily it appears to be not to badly damaged.

@audiquattrojamie Жыл бұрын

Great video as always 👌🏻 Gutted about the car getting airborne though but thankfully not much damage

@jamesgrates7170 Жыл бұрын

Nice build bud don’t give up keeps us motivated

@EddyWatson84 Жыл бұрын

That suspension setup is genius!

@ethanng8944 Жыл бұрын

Awesome build man! It was so fast and the throttle output was only 46.5 therefore I think this car is promising! Good luck man! Here’s a quick tip, I think you need silicone tubing on the shaft of the shocks this prevents the car from going down the same level as the front end and do a backflip maybe try that instead of the toe links on the shocks to the other shocks! The contrast between Spartan and Vision is that Spartan is lighter and the motor and the equipment in the car pushing it down will not interfere the back to go down as well as vision having double the weight contrast to Spartan. In a nutshell, it’s either wind got under it and down or it got pushed down as those links will not take it that well contrast to silicone nitro tubings!

@heat305rc Жыл бұрын

Yessir bro, beastmode status. Baby steps with this monster build, youll eventually get out of it what you were expecting and then some. 👊🏼👊🏼💯💯🔥🔥

@beachinrc101 Жыл бұрын

Deff didn’t expect that especially after such a tight first run just glad it didn’t get mangled to bad bro!!

@gamechangerrc4633 Жыл бұрын

Great video Vision lives to see another day👊👊💯💯

@wakkogn9351 Жыл бұрын

Looks good!

@davemasek Жыл бұрын

Good to see you posting again. What a unit! Can't wait to see it rip 200.

@davemasek Жыл бұрын

Awesome to see local Delray in the videos. 🤙

@Captinfun101 Жыл бұрын

Kind of looks exactly like my build to the t! Except I’m using a scorched twin motor mount. Scorched all the way. That Bec is quite a good idea. Nice work

@curtisthompson7674 Жыл бұрын

Awesome work big brother

@DavidJohnson-rb2wi Жыл бұрын

Awesome run bud 👍

@eminstinct4114 Жыл бұрын

I wouldn’t recommend locking out the suspension like you did you want there to have some to prevent the back shocks from going to far you can use Teflon tubing in the rear with stronger springs same with the front awesome video I’m excited to see more

@InnovationRC Жыл бұрын

At the speed it goes regarding rear downforce, it will still slightly squat

@MatMabee Жыл бұрын

@@InnovationRC Spring-rate is the measurement of how much force it takes to fully compress the spring. Calculate the down force that your wing produces at full speed, add approximately the weight of half of the vehicle(per quarter) and find/calibrate springs to match. From an engineering perspective it'd undoubtedly be beneficial to add some absorbency to such a rigid frame.

@EZ-D-FIANT Жыл бұрын

I'm gonna agree and disagree here, if he's on super smooth ground......🤔

@xXB.FunkXx 11 ай бұрын

@@EZ-D-FIANTgood luck finding that. I've ran on airstrips and they weren't even perfectly smooth.

@RCSpeedster100 Жыл бұрын

Awesome job 👏

@karl-udobecher8003 Жыл бұрын

That was totally sick bro

@jspeedrc Жыл бұрын

Awesome build🔥🇫🇷

@blacksheeprc8113 Жыл бұрын

Nice 👍

@jonlewis758 Жыл бұрын

Dope build

@tkostang Жыл бұрын

Really really clean lookin build

@BEASTMODERC Жыл бұрын

Wow 🤩 insane bro. Glad the crash wasn’t too bad

@mildtowildrc7343 Жыл бұрын

Man the body mount supports are badass👍

@garethwalker9414 Жыл бұрын

Beautiful Build Bro 👍👊

@rcsfinest1883 Жыл бұрын

Nice 👍🏾

@bigboytoyzrc9258 Жыл бұрын

Great to see you back man!

@InnovationRC Жыл бұрын

Thank you!

@Icantdrive55 Жыл бұрын

Glad to see you going after the 200 mph record. If anyone can do it it’s you. Build looks solid. I like your attention to detail. At those speeds aerodynamics plays as much a role as power. As shown by your crash. Possibly a bump or a stone allowed more air under the car and lifted the front end. Getting the batteries further forward for better weight distribution should help. Downforce helps but you sacrifice speed but you know that already. It’s a tricky trade off. Great job on the build.

@InnovationRC Жыл бұрын

Thank you! I appreciate that. It was super hot out that day so that's why the front tire chunked. Body never catches air it's setup correctly so air doesn't enter inside

@rcbustanut2057 Жыл бұрын

Wow, awesome bro!! Amazing build!!...I don't know how I missed the notification for this video, I have been waiting for this build ever since the 1st mention of this build lol. Glad that she had minimal damage, I know how it is to finish a build & then wreck the car because they're magically attracted to telephone poles that are 50FT apart!!😂😂 Keep'm Fast Bro!! 😎👍

@kevinrc.marino2068 Жыл бұрын

Real awesome build Brandon good luck with it. 🏁

@InnovationRC Жыл бұрын

Thank you sir much appreciated!

@kevinrc.marino2068 Жыл бұрын

@@InnovationRC yes sir

@Ls3Atomicvette Жыл бұрын

that car is moving nice to see the set up and process it to to get it going that fast

@George.T.83 Жыл бұрын

Great project 👍. I think the problem was the rear wing. Must be straight. This cause the flying issue. Keep up the good work 👏.

@Rcghostnrk Жыл бұрын

Nice brother I need a set of these brother!

@robsrcinsanity1220 Жыл бұрын

Great video 👍🏻🍻

@InnovationRC Жыл бұрын

Thank you Rob!

@DaneH64 Жыл бұрын

I noticed one of the main problems with these speedruns is the body always acts as a parachute, wonder if it'd be beneficial to add wheelarches and body posts on the side of the bodies? Great run either way, and a beautiful car at that!

@brandobashin4838 Жыл бұрын

VERY HYPE FOr the batteries buying a pair next Wednesday

@InnovationRC Жыл бұрын

Awesome! I'm hyped too!

@MZBallistic Жыл бұрын

Amazing builds as always, but i think you need to replace that wing with someting flat.

@mitchellminer4596 Жыл бұрын

Man I feel your pain absolutely a beautiful build buddy be proud👍👍! I did the same thing with my dual 1721's first pass on 8s they are insane! It sucks but we learn from every crash

@user-sd7bh1hc8g Жыл бұрын

How fast did it go

@mitchellminer4596 Жыл бұрын

@@user-sd7bh1hc8g 145mph then took flight and wiped out a speed controller xlx2😩 it was incredible

@CoachD386 Жыл бұрын

Yessssir 💯🔥💪🏾

@geraldcapers8199 9 ай бұрын

Nice

@reinierwelgemoed8171 Жыл бұрын

awesome setup man. What is best supplier for the speed run foam wheels?

@AzNativezw1 Жыл бұрын

Your dog is great. You should check out the active rear and front wing. . your spoilers will pitch up and down pensing on your throttle response. That mod would be the cherry on top of this build.

@radicalran2482 Жыл бұрын

👍👍How was definitely fast and I was only half throttle like you were saying if you did a good job building that

@radicalran2482 Жыл бұрын

I race RC cars too I have a fast one but not that fast you got a little bit more than me mine gets up and boogies I'll tell you that but not passage that

@teslacybertruck750 Жыл бұрын

I love the car!, you can break the WR of 204mph, with you engineering skills on rcs

@carpetprosanthony4706 Жыл бұрын

Lol

@alterdcustomrc4512 Жыл бұрын

Crazy power. Scorched chassis are super strong. Raise punch to 100 haha. Should help

@sheliabryant1911 Жыл бұрын

Everyone I watch uses those tires....always exploding,that bananas 🍌

@InnovationRC Жыл бұрын

It was too hot out I think that's why it chunked

@TKO593 Жыл бұрын

Just a really windy day. Funny to say it was a lucky crash with that little damage. When are you heading out there for another attempt? Would like to join you.

@Dingle-Berries Жыл бұрын

Best of the best/ shes a beast

@beniaminz Жыл бұрын

Imagine how dual 8s at full power will look like

@EZ-D-FIANT Жыл бұрын

Voltage vs amp at usage is a thing, sometimes for speed runs you can get more from less, American "bigger is better" isn't always correct......

@meanmachinesrcclub Жыл бұрын

Excellent build! Besides the wind, maybe the lack of front shocks may have contributed to the flight!

@ozzracer Жыл бұрын

I saw at the start you used 8mm castle connectors on the esc and then changed to qs8 ?

@karl-udobecher8003 Жыл бұрын

I am glad for you that it did not do more damage

@nicholasduckett3463 Жыл бұрын

That's fast bro I don't like when my car takes off flight but god will never put fear on his people u got it all together bro 🙂

@InnovationRC Жыл бұрын

It's certainly a scary thing... Thanks man! I appreciate it

@m.p1976 Жыл бұрын

So Crazy and so much Money Kohle Zaster!!!

@pamzammer7451 Жыл бұрын

What your remote can control up to 1km?

@rcjunkie260 Жыл бұрын

It's been awhile. Good to see you back at speed runs. With the front suspension locked out your front tires are taking all the bumps on the road and not the shocks. Will have to see what happens with no wind. I hope no tire chunking out at speed. Locked out suspension is going to be interesting at speed. Only time will tell. I hope all goes well, Great road for speed runs NO TRAFFIC AT ALL!!!!!!

@InnovationRC Жыл бұрын

Thanks, never had an issues with locked front suspension on Spartan I think the tires just didn't hold. I run the same tires in Spartan as well so it was probably just a hiccup.

@rcjunkie260 Жыл бұрын

@@InnovationRC yea no more hiccups over 20mph🥴 Good thing arrma designs really fast and tough tanks. Good to see you back doing videos 😉🤙👍🤝

@crawlersncustoms Жыл бұрын

Are you in SE Florida? I think we’ve talked before. I’m doing a speed run build and it would be cool to link up. Thx

@illhairacing3543 6 ай бұрын

Will these battiers fit good in my xrt or outcast 8s?

@dodgymtbknee Жыл бұрын

so straight and stable! brilliant builds. watching that slow mo clip, did the air get in behind front wheels and lift arches? looked like sides expanded due to no posts or tape on sides

@InnovationRC Жыл бұрын

Tire chunked out in the front making the vehicle flip. Never had an issue with the Corvette body catching air.

@dodgymtbknee Жыл бұрын

@@InnovationRC dam foams spittin chunks... that's gotta be the biggest issue every speedrunner faces gettin foams that hold up well. all the best for next attempts 🤞

@InnovationRC Жыл бұрын

@@dodgymtbknee I have high hopes still with these foams I trust them. First hiccup I've ever had with these

@GabrielHodge 11 ай бұрын

I was looking at doing this for my limitless going with two hobbywing 1100kv motors I think it's a 1/5 size and two traxxas 8s vxl escs it's a bit pricey

@FarmerFpv Жыл бұрын

That's bananas on 6s. It looks like at the 9:50 mark a pieces of tire flew off into the grass as the car was about to pass by you. When that happened Newton's 3rd law came into effect pushing the car up into the air stream. I thought you were done building airplanes. lol. I hope to see her back out there soon!

@InnovationRC Жыл бұрын

I think the rain why is that the tire chunked out. Hard to tell with the wind though

@richarddangles8896 Жыл бұрын

I suggest a fpv unit on these high speed runs. That way it never gets out of field of view.

@Cornelius1175 Жыл бұрын

“HALF” throttle Sun¿ that ish CRAZY!!

@bimmarvinlim3804 Жыл бұрын

Few tapes might have helped keeping that beautiful car on the ground.

@gamebosan5965 Жыл бұрын

7:34 do u not use side tape for bodyshell?

@gtotimmy Жыл бұрын

Great videos! All of your RC vehicles are top notch!! On your motor wires what are you using to hold your wires together nice and neat? I have 10 gauge wires and it’s hard to find clips that are small that hold the wires together.

@InnovationRC Жыл бұрын

Thank you! They are just zip ties holding them together!

@gtotimmy Жыл бұрын

@@InnovationRC You’re welcome! Thanks !

@Im_Bloody_Close_to_Being_a_God Жыл бұрын

No front suspension???

@richardkastberg5491 Жыл бұрын

Charger for this batteri?

@user-rx8qq8sk9ydv1ce5ib Жыл бұрын

Is it possible to add a good weight at front end. All these tests ends up on car flying. Well done mate.

@Luke-en2tk Жыл бұрын

Nice build, maybe just a different body and wing

@bevinsracing Жыл бұрын

I'd guess it hit something maybe..or the front splitter might stick out to far caught air

@brahmdempers1005 Жыл бұрын

Front splitter must stick out from underneath the body and stick the body to the splitter with ductape. That with help keeping the nose down. Good luck dude!

@illSampleThat Жыл бұрын

I’m mad you flipped it but it’s good nothing looks damaged but I wanted to see you complete that pass great job

@MatrixRC Жыл бұрын

That's a 200+Mph car bruh. Heck of a job and creativity.

@upsidediy3945 3 ай бұрын

Should have kept the front shock springs in. The whole car was tuned for insanity. And it might need skate board wheels.

@jeffbryner5355 Жыл бұрын

2k to go straight for a few seconds! I will pass lol. It's still freaking bad ass looking though for sure great job on the build

@joshchatwin8569 Жыл бұрын

Front splitter to long trim it down an inch try that mate

@Moggmodels23 Жыл бұрын

Just watched your video brilliant video mate lots of power. I've bought myself the rovan f5 electric is this any good for speed runs like 12s or 24s what's your views bud let me know 😀😉

@Moggmodels23 Жыл бұрын

rover f5 electric car / mogg rc model kzfaq.info/get/bejne/adiDn7h71q-vnYk.html

@InnovationRC Жыл бұрын

Thank you! Well I'd have to say anything over 12s is ridiculous in all reality. 12s is more than enough power to move anything!

@johnman5178 Жыл бұрын

How can I buy something like this

@93jdmmike Жыл бұрын

Nice little video bud sorry about the car

@justinclement5417 Жыл бұрын

BIRTHDAY BOY GETS FIRST !!!

@jbrc1322 Жыл бұрын

A BEC isn't a small ESC- it is merely supplying a regulated voltage to the rx/servo/etc. Just want to clarify that. Most ESC's have a built-in BEC, but a dedicated BEC is unable to perform functions of an ESC as far as controlling the motor.