4G15 Non-Grout Filled Engine Teardown / What broke 2SEXY?

Рет қаралды 325,714

6 жыл бұрын

No idea what a 2SEXY is? go watch this first: • The Return of 2Sexy
Woody and Al tear down the 4G15 Mitsubishi engine out of Marty's Lancer to try and find out what went wrong when it blew up on the main straight at Sydney Motorsport Park.
NEW Skid Factory Merch Out Now: mightycarmods.com/collections...
Get GFB Stuff here: www.gofastbits.com.au
Don't forget to subscribe and hit the bell for Weekly episodes of this build.
For updates keep your eye on The Skid Factory (TSF) here:
Facebook Page: / theskidfactory
Instagram: / theskidfactory
Please note: We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy.

Пікірлер: 851

@mightycarmods 6 жыл бұрын

"YOU HAD ONE JOB..."

@michaelrussell6661 6 жыл бұрын

and you did it RIGHT ;)

@unicorn7337 6 жыл бұрын

I lost it at that bit. :D

@markm0000 6 жыл бұрын

Then the next scene Al forgets the bolt and again.. YOU HAD ONE JOB!

@generic2858 6 жыл бұрын

You could take the engine block and stick a glass slushy machine on top of it. Drill the sides and install spouts and pluming inside. Then put it in the restaurant on one end of the bar. Unless the block was long thrown out.

@guspolinski1165 6 жыл бұрын

generic2858 and add some speakers and mount it on springs with a shaky motor on the bottom so each time you pour a slushy it looks and sounds like the engine starts up

@lory2622 6 жыл бұрын

“The rod has made a clearance mark.” Ten outta ten Al.

@modelnutty6503 5 жыл бұрын

his sense of humor with the delivery so bare+dry, so much funnier!

@MrLjm74 6 жыл бұрын

"It's gotta cracked piston, a bent rod and a hole in da bore". "If it was vaping it'd be a Subaru" XD

@jaykatana9418 6 жыл бұрын

xD damn AI's a legend!

@raddeal1 6 жыл бұрын

Ded

@markm0000 6 жыл бұрын

Rekt

@Yesidoplaytheguitar 6 жыл бұрын

I laughed so hard at that. I want that on my gravestone!

@ellenorbjornsdottir1166 6 жыл бұрын

my hyundai vapes :/ not mad

@willvile7749 6 жыл бұрын

The lemon squash addition got me good

@markm0000 6 жыл бұрын

Tasteful humor 👌

@7316bobe 5 жыл бұрын

Yes I liked the 8 ball and the condom packet. Very funny.

@donnyanda3191 6 жыл бұрын

I would put that rod in a frame in the restaurant.

@Captaindan7141 6 жыл бұрын

No Name Excellent idea! I want to come To Australia and eat there so bad.

@jfsavill84 6 жыл бұрын

The three stages of unbolting: Hard, harder, grinding :P

@Kodiakcatdog 6 жыл бұрын

John Savill missed a step torch

@themadhammer3305 5 жыл бұрын

Goldmarble 1: come loose 2: no really come loose 3: maybe a longer bar? 4: acetylene torch 5: fuck it get the grinder out.

@HarryTwatter 6 жыл бұрын

everything is better with the Skid Factory crew

@vickyaustin7548 6 жыл бұрын

Even sex?

@te3data 6 жыл бұрын

Probably mostly the sex!

@ArtVandelayOfficial 6 жыл бұрын

x100000! better info and they're actually funny

@brucef9859 6 жыл бұрын

Marty looks like he lost weight

@mightycarmods 6 жыл бұрын

and gained some hair, then shaved it off anyway

@jaydenoloughlin6694 6 жыл бұрын

lol

@chrisoh6627 6 жыл бұрын

Lolol

@baconfister 6 жыл бұрын

Maybe he’s getting his mountain biking fitness going along. It’s an amazing way to get one’s body fit, fast! Or he could just be doing methamphetamines. LOL!

@elitecol69 6 жыл бұрын

Chemo is a hellova drug

@captainzoll3303 6 жыл бұрын

3:25 it seems as though the previous owner replaced the piston return springs with squash cans?

@jarekpszuk6944 6 жыл бұрын

Captain Zoll, I know you. You're the one from beamng forums. Nice

@joshuafurlong6923 6 жыл бұрын

Nice chris fix plug

@RatelHBadger 5 жыл бұрын

You gotta look after those piston return springs

@seanperson2032 6 жыл бұрын

When you guys pulled the engine out and Marty did the oil drain and straight coolant came out I just busted out laughing. Even crazier to see how big of a hole there was in that coolant jacket

@tarheel4wd 6 жыл бұрын

or was that lemon squash coming out of the oil drain?.......🤣🤣🤣

@keith5790 6 жыл бұрын

turbo Yoda was like, he had one job...

@Turbochargedtwelve 6 жыл бұрын

“ shall we put some oil in a tube and send it off for analysi?” Love all the little jabs at car forum BS haha

@garystinten9339 6 жыл бұрын

Stanley Zitello yeah.. send that off to forensics.. blue murder.

@SprayIgniteBoom 6 жыл бұрын

Stanley Zitello Yes...people are absolutely nuts 🥜 about the wrong shit. Money, time, passion and application are all WAAAY more important than pure dyno power.

@ttakiari6820 6 жыл бұрын

Wow Al's hand healed up quick. Lol

@elitecol69 6 жыл бұрын

Teahu Takiari all vids are made many months ago genius

@Rattus-Norvegicus 6 жыл бұрын

Fred Bassett Wow you're bright.

@joeltyler3427 6 жыл бұрын

The skyline build was still on the host. In the previous video on the main channel.

@rubioo93 6 жыл бұрын

When you're Yoda, you can heal in less than 24 hours lol

@danielcopp6773 6 жыл бұрын

It's the lemon squash - miracle healing qualities

@masonjarvis2146 6 жыл бұрын

Al is honestly the funniest man I know of 😂

@kstricl 6 жыл бұрын

All right! New shifter for 2sexy!

@SprayIgniteBoom 6 жыл бұрын

kstricl That's a great idea!!!!

@frederickthorne2496 6 жыл бұрын

hah!

@AlexRib 6 жыл бұрын

Yeah dude!

@crunchy90433 6 жыл бұрын

The HeAd GaSkEt was fine. Take note, Ford.

@_Professor_Oak 6 жыл бұрын

HEaD GaSK3T

@claw-machinesNL 6 жыл бұрын

TelevisedChaos H34DG45K3T

@eclipsegst9419 6 жыл бұрын

Imagine being the one guy who put all those on wrong... Pretty sure hes fired now haha

@Mrx1080 6 жыл бұрын

That's not the problem, those engines have valve overlap. Couple that with a small turbine and you get detonation = H34DG45K3T??

@wheelitzr2 6 жыл бұрын

Mrx1080 can you elaborate on how either of those issues creates detonation?

@Jin_D3vil 6 жыл бұрын

Good to know what actually happened. It's interesting to see this as it also reminds you that modding without prep work for that extra power will cause problems as well. Will look forward to 2.5exy and how you both upgrade it. Keep the Skid Factory content coming as well. :)

@JyveKilla 6 жыл бұрын

Looks like it's been on the special Mitsubishi 50,000km service intervals before Marty owned it

@thumperwd 6 жыл бұрын

Al's face expression when he swing that grinder over to cut that bolt off the rocker cover is priceless😂

@Ric0chetAus 6 жыл бұрын

Al has warmed up heaps since skid factory began. He’s hilarious

@jesseguerrero6631 6 жыл бұрын

Oil Analysis Results: the purity levels of the Evo Stancer were too high. The rod bent itself so Marty could swap the engine and bring the purity back to reasonable tolerances.

@ibraHemi 6 жыл бұрын

Just awesome guys always delivering awesome content, thank you mighty car mods for introducing these guys to you tube as well as your awesome shows 👍🏻🤘🏻 big fan

@tomodonnell3526 6 жыл бұрын

Casual style videos are great. That was fun to watch. Definitely left a clearance mark hahaha.

@madgreek253 6 жыл бұрын

My shorts are a skid factory with 2 episodes this week.

@MichaelBacon212 6 жыл бұрын

Well compared to the mighty car mods video Al your hand is looking much better. Quick healer or filmed a long time ago?????

@alt7488 6 жыл бұрын

the return of 2 sexy was filmed around jan/feb this year marty/moog admitted that fact on the other channel

@garystinten9339 6 жыл бұрын

It's just what Al does. He's Yoda FFS..

@Candisa 6 жыл бұрын

Al T "admitted"... As if it's a scandal to edit and release videos when there is enough material to keep a steady uploading scheme for the fans, and rather not give away live information about what they're doing after being robbed and harassed multiple times.

@Candisa 6 жыл бұрын

They start releasing project videos when the project is (almost) done, and it goes in the queue if they are still releasing videos from a previous/simultaneous project. Al probably got around checking out 2sexy's engine just recently after it's been gathering dust for half a year, it's winter time.

@DozIT 6 жыл бұрын

He also broke his pinky dirt biking on skid factory around April/May right?

@johnnyk2322 6 жыл бұрын

Thanks for the knowledge and mad laughters.

@bwh32 5 жыл бұрын

Really like this content, Al is great to watch, he drops knowledge bombs and sick lemon squash references.

@Mike-tr8zy 6 жыл бұрын

You guys are killing it. Absolute legends

@ALAPINO 6 жыл бұрын

*RELEASE THE SCHMOO!!!*

@Rudabaugh 6 жыл бұрын

ALAPINO AvE represent 👊

@splooshmccooch2862 6 жыл бұрын

That motor wasn’t a skookum choocher for sure

@AttilaThebung 6 жыл бұрын

The Mivec should be the Cockford Ollie tho

@chowly 6 жыл бұрын

¡A treat especial!

@AzNKiLLzoNer 6 жыл бұрын

Hopefully the new motor has the cockford Ollie stamp of approval

@Tuilaione 6 жыл бұрын

Double Blessings of Skid Factory... What a Happy Week... Overdose...

@saliyagurusinghe7148 6 жыл бұрын

Yup, one of the best engines Mitsubishi made. Had the 4G15 and then a 4G64. Both excellent, reliable units.

@OvAeons 6 жыл бұрын

"do you wanna do a [thing]?" * Al stares in disapproval *

@syafiqjuperi423 6 жыл бұрын

Finally, after years of following you guys, I now get to tinker my engine! Long live 4G engines

@MrNot2sober 6 жыл бұрын

Laughed way too hard at the Subaru comment. Well done!

@TheCuttz1984 6 жыл бұрын

Lemon squash piston return springs. Damn Mitsubishi do know how to make a motor... Hahaha great video once again fellas

@Skarfar90 6 жыл бұрын

I had a 4G13 (1.3L) in my old Lancer. Pretty solid engine, and very easy to work with

@Siiiiiikk 6 жыл бұрын

MAAAAAD 2 Peices of turbo yoda content today😍😍😍

@jko0two 6 жыл бұрын

I like that they use my favorite tool. The turnining arm from an engine stand. So multi purpose

@Rahhhhhnman 6 жыл бұрын

"You had one job" with Al's intonation........gold :)

@Huda88754 6 жыл бұрын

Cant wait to see the oil analysis report

@sed8181 6 жыл бұрын

I've been looking forward to this. Love seeing blown motors torn down. My favorite was a motor from some ladies car that never got it's oil changed, I had a good laugh at how 2 cylinders were fried with rings and bearings welded to crank and piston.

@coles201 6 жыл бұрын

Love this series.

@TheMythicalHaastsEagle 6 жыл бұрын

Ha, wish I could bottle "the look" AL gives. Pure Gold.

@Kelthor85 6 жыл бұрын

Bohemian Eagle It's on the way to Clint Eastwood, just not quite.

@michaelrouw2117 5 жыл бұрын

Bohemian Eagle In real life that look can be a little scary. Like not too sure what he's thinking.!! Maybe even grumpy.!!😙😙

@mattfarahsmillionmilelexus 6 жыл бұрын

Miraculous recovery on the hand, Alan.

@wellbutrinwellbutrin7387 5 жыл бұрын

Best show, never stop

@skullcam 6 жыл бұрын

awesome vid once again bro's

@shaneroberts9192 4 жыл бұрын

I have a 99 mirage I call her thrasher with the 4g15 great engines keep up the good work guys...

@nopenope843 6 жыл бұрын

Keep them coming!

@kylel2918 6 жыл бұрын

Mid week surprise episode! Hell ya.

@TdrSld 6 жыл бұрын

Keep the piston and is rod cap, you can turn it into a nice bench top clock. I have done this a couple of times for customers.

@itsecco2585 5 жыл бұрын

Turbo Yoda gives people the best looks. Gets me every time!

@mcarp22 5 жыл бұрын

I like how at 7:26 Al tugs on the piston as if he's going to pull the rod back straight.

@nathsimpson 6 жыл бұрын

Hard like! That was awesome 👍🏻👍🏻 thanks for sharing!

@salrusso913 6 жыл бұрын

Al's hitting that bin "LIKE A BOSS".....

@MyBridgestone24 6 жыл бұрын

It's like Christmas in August! Two episodes in one week!

@HepauDK 6 жыл бұрын

I just love Al's facial expressions. They are epic! :)

@mr.a5147 6 жыл бұрын

Great video! More failure tear downs please!

@apassionfortangling3671 6 жыл бұрын

Hammer the rod straight and put it back in lol!

@Libertarian737 6 жыл бұрын

Nice motor bike pin stripping on your hand Al.... almost looking like your patrol with the 4 wheel pin strips it has... the classic eightball in the sump... rolled on the floor with that one.... 😂😂😂

@daniell274 5 жыл бұрын

Love the content!

@chrisp2843 6 жыл бұрын

i have to admit id love to work with AL. gonna be lots of laughter and fun work XD

@nealsy05 6 жыл бұрын

Oh to have a mind like Als, full of so much knowledge. Awesome channel guys :-)

@kstricl 6 жыл бұрын

For everyone asking about grouting, I believe they are talking about filling the stock block with cement or some other type of "Grout", aids in the engine block surviving under higher boost levels. Doesn't really stop rods from bending though.

@kruleworld 6 жыл бұрын

I've never heard that expression before. Not a standard automotive technique.

@cmb1972 6 жыл бұрын

I took a dump the other morning, and that damn 8 Ball came out, gets bloody everywhere!

@captnjaygreybeard6394 5 жыл бұрын

Hahaha when you take off the header manifold, awesome

@themichaelvortex4784 6 жыл бұрын

Nice post mortem Dr. Yoda! ...Sorry Woody, guess that make you the Nurse. Great video!🤘🏼✌🏼

@GstarCurtis 6 жыл бұрын

Love this show, its so amazing!

@7316bobe 5 жыл бұрын

I owned one of these Mitsubishi Lancers and it was a great car. I drove it into the wreckers at 420,000 kilometers. They gave me 50 dollars and I got 75 back on the rego. I bought a Toyota Corolla but I do not like it. Tomorrow the 27.04.2019 I am going to look at a 1 owner Lancer 1992 GLX CB 5 door hatch. It looks immaculate and if it drives ok I will buy it and sell the Toyota. The Lancer 1500 motor has adjustable tappets 12 of them and the Corolla has 16 valves with shims which are a pure bastard to adjust. I am hoping that the Lancer has a carburetor as I can fix this. The Corolla is fuel injected and I can not fix that. Wish me luck for tomorrow. Bob

@chadlegault9993 6 жыл бұрын

Potential 8 seconds until it blows??? Love it, great video!

@ChanelMy 6 жыл бұрын

I realy enjoyed this episode ! Cracked me up a bunch of times :) Turbo Yoda bro wish you a fast recovery !

@EvenBratsberg 6 жыл бұрын

Not one, not two, but three episodes with turbo yoda this week, life is complete!

@barje.waffles5461 6 жыл бұрын

BWaaahhhhhhhhhhhh!!!!.... DUGA DUGA DUGA DUGA DUGA DUGA DUGA!! The sound of the fun is over. At least till you get it back to the shed.

@LUDPWR 6 жыл бұрын

Best thing I've seen all week! Absolutely hilarious! :-D

@FormageOCAU 6 жыл бұрын

well done boys, definitely my kind of humor!

@tedsmith6137 6 жыл бұрын

Great demonstration at 1:45 of why NOT to use power tools to loosen bolts. Crack them with hand tools first, then power wind them out , or use a speed brace.

@danielcopp6773 6 жыл бұрын

best auto-autopsy video!! Thanks lads!!

@keredfinn2799 6 жыл бұрын

hello... thanx for the show... super stuff... what does non-grout filled engine mean??? (factory innards???)

@SjefeNoverSjef 5 жыл бұрын

Turbo Yoda's face expressions are legendary.

@allistairmagallon4030 6 жыл бұрын

I love how Allan has this dead pan humor. But you know he is a teddy bear

@One_Guy 6 жыл бұрын

yay just what i needed for my Boring Friday!

@nestrac 6 жыл бұрын

Somebody gotta tell Marty that it is bends in the ROAD that brings you joy not bends in your ROD.....

@izzyboss6875 6 жыл бұрын

Hey, nothing wrong with a bend in your rod

@keithhaycraft3765 6 жыл бұрын

Which is the very reason I so loved riding good handling motorbikes, especially my Rickman.

@mikedrop4421 6 жыл бұрын

Hey man, isn't it just insulting sharing that bit of wisdom *NOW* ? Just saying.

@StrangaPsychoPachic 6 жыл бұрын

A few episodes back on the barra swap van, you knocked the top off the subaru ez30 inector. I was wondering if you could go more in depth with that? Im going to be getting raptor headers and may need more fuel.

@Onhaey 6 жыл бұрын

Just the look at the end had me dying

@TheMythicalHaastsEagle 6 жыл бұрын

Love the vids, keep them coming. One suggestion, could you give Al a torch to point at stuff. Chur

@opexo 6 жыл бұрын

I suppose because of the hole at the bottom of the cylinder, things happen fast, coolant entered into the cylinder and on to the next stroke it bent the rod because can't compress coolant. OR... what Al said. OR... something else. I think it's very interesting to know. Sadly i think this motor is long gone by now to investigate (still haven't watched the vi to the end)

@bassamoitie 6 жыл бұрын

Funny those spanner sizes. In my line of work (building trains) it's pretty much exclusively 10, 13, 16 and 18 for the normal sized stuff.

@chrishenkel2194 6 жыл бұрын

The old zig zaggie rod trick.. ha ha love the show

@SDubProjects 6 жыл бұрын

Dam your hand healed fast yoda!!!

@kennygaijin3793 6 жыл бұрын

Yiyeah been looking for people build the 4g15

@davespiros 6 жыл бұрын

Fantastic video, maybe as a swap deal for the mangled parts, MCM could send Al and Woody some Ryobi tools so they don't have to wait and share one ha ha

@Not-Slim-Kinda-Shady303 6 жыл бұрын

Looks like my assumption was right. When i saw all that coolent come out when marty drained it ininstantly knew what let go. Cant wait to see the next chapter

@beaty2nick 6 жыл бұрын

Great seeing Woody more hands on of late!

@bluedogdataelectrical6303 3 жыл бұрын

You guys crack me up.. 8 ball gets me all the time

@ziggassedup 6 жыл бұрын

That's a nice one for the trophy shelf.

@numinous4789 6 жыл бұрын

Glad your hand's healed, Al. It seems like it happened so quickly! Ahhhh, the magic of delayed video releases :-D

@ZoneKei 6 жыл бұрын

"It's a boy!" - Al's banter is top notch.

@JDM_DAISUKI 6 жыл бұрын

Nice cricket reference for your overseas players

@fridonina 6 жыл бұрын

That hand healed quickly Al !

@shanetaylor6596 6 жыл бұрын

The jokes have been ON POINT lately. Keep it up boys.

@shadowsandfire 6 жыл бұрын

haha good 1 Woody, 3 cyl for the mira, love it! Al is so right about it being a good engine, I have a 4g15t in my lil colt making just on 235hp on stock internals with a DW65c, Denso 650cc injectors and my little TF035-TD04-15T on 21PSI, daily belted to redline and shes been doing that for 5 years now and still goes strong! factory Getrag 5 speed gearbox with Quaife LSD (best thing i ever bought in my life) also I'm a sales rep so I do a LOT of KM's