Wasnt a fan of the earlier models but im come to the conclusion the recent gen forerunners is the best looking vehicle toyota has made. Arguably most reliable to boot

Let's Go! Been wanting to get a better fang lights video install. Thank you

You really have to have a second car to do this install. Because I would need a week of rest after getting all the bumper off. 😂😂😂

is it possible to tap these into the factory fog light switch so they turn on/off independently with the fog lights while still being a functioning turn signal as well? Hopefully this question made sense.

Great video ! Fang lights look great. I like the shackles you install on the front factory tow hooks. What size shackles are they?

Connect the Fang Lights to the Morimoto DRLs Splice Connections: You will need to splice the wires from the Fang Lights into the DRL wiring of the Morimoto headlights. Positive Wire: Connect the positive wire of the Fang Lights to the positive DRL wire of the Morimoto headlights. Negative Wire: Connect the negative wire of the Fang Lights to the negative DRL wire of the Morimoto headlights. Use Connectors: Use T-taps, butt connectors, or solder and heat shrink to make secure, weather-resistant connections. Ensure all connections are tight and well-insulated to prevent shorts.

What is the function of the white wire and why is it not used? Is the wiring the same for the switchbacks?

I git triple fangs lighr there is no blue wire they are white and red how do I knkw which wire to use to tap in the blinker?

Were these considered "plug and play"? I just ordered some and asked if anything extra is needed like the add a fuse and they said they are plug and play.

Will the sensor need to be recalibrated?

Is it possible to run these lights along wit raptor lights

What if I already have raptor lights on the add a fuse in fuse box, can I just use a T tap on the red wire to connect the red wire on the raptor lights?

damn this took me forever lol

The link that you provide for the t-tap connector is not the same one that you actually used at the video. So I’m q bit confused in that part and I don’t know how the make it work. Can anybody help me with that?

What if you only have a white/black wire and a green wire?

He mentioned about some models or newer models that has one connector for the fog lights, mine has that one connector. Will it be a different connection/wiring if it is? Installed fang lights on mine and both front blinkers don't work anymore, left side fang turn signal works, but has made it hyper flash, even after disconnecting the fang lights, front blinkers still don't work, huper flash still there too. HELP😅

Wasn't that a solder and seal connector not a crimp?

Can’t find an email to ask questions on the website. I finished the install for the switchbacks but the turn signal function isn’t working. The white running light works though. I have a feeling the White option was shipped to me instead of the Switchback. Hope you guys can help me

Do the triple fang lights install the same way ?

Your connection them to halogen...what about morimoto xbs?

What if I already tapped into that fuse for raptor lights?

What if you have raptor lights already in the inj fuse ?

I’ve done all the steps but I have zero dollhairs for this

⭐️⭐️⭐️⭐️⭐️

Screw washing it first

Did anyone have issue w right blinker not working after installation? Yellow to blue and blue to yellow? Maybe it’s should be same colour wire connected together?

Damn….thats way too much work for fang lights. I would probably screw it up anyway.

The fuse is in too out of shape steps phew where fuse what's fuse?

My eyes. The goggles do nothing.

Forget it,too much work😅

You dont need to remove the whole bumper. The kit doesn't include a fuse jumper The kit also doesn't include wire tappers Yea this shit was overpriced af, and this video doesn't make sense since the kit doesn't come with any of these things. I ended up getting an amp jumper, spare #10 fuses, and wire tappers. Worked well, but I sure ain't buying from you guys again.