4Runner Limited - High Clearance Rocker Panel Modification Guide

Рет қаралды 12,387

Жыл бұрын

In this video I will show you how to trim your rocker guards to provide additional clearance while maintaining a factory appearance. This will save you money and give you the ability to add rock sliders designed for the TRD Pro/TRD Off Road/SR5 as long as the xreas system has been removed/upgraded first.
Dremel (only $65): amzn.to/3U28FmD
Dremel Ez Lock Head: amzn.to/3TVuLqI
Dremel Plastic Cut Wheel: amzn.to/4aZCcnE
Hope you find this video useful!
As an Amazon Associate, I earn commission from qualifying purchases at no extra charge to you. Thank you for your support!

Пікірлер: 60

@dizzle.1983 Жыл бұрын

Just did this to my limited. Omg looks so much better. And looks much more lifted. Color matching the chrome is Definitely the way to go. It honestly looks better than sr5

@alexvle Жыл бұрын

s/o to you for making 4runner limited content bc LIMITED needs love too!!

@joeythedime1838 Жыл бұрын

This is a fantastic mod for a Limited. I am going to try and gather up the courage to do this on my 2019 Limited when I replace the XREAS suspension with Bilstein 6112's this spring. Absolutely love the look.

@TheTimothy19 Жыл бұрын

Wanted to take a minute to say thank you for this video. Really thank you for all the content regarding the Limited but specifically this video at this time. I JUST put rock sliders on and realized the bare area needed a solution and boom here you are with the answer, two weeks before I knew to ask! I've got mine all taken apart and ready to measure and cut this weekend! Nice touch blacking that chrome strip too...

@rolandoleybag8577 Жыл бұрын

Wow!! You’re genius bro , it’s really impressive/ amazing mods. It’s really a like legit factory finished. Congratulations & good job bro. thanks a lot for another informative & educational video that you made… stay safe & God bless.. 👍😊👋

@MikeinCC Ай бұрын

Wow! SO glad I found this. As a new (to me) 2010 SR5 owner I noticed it has the Limited rockers, and not sure why. Saw other threads and videos linking the parts list to switch these out and MAN are they expensive! This is a fantastic solution esp if you're going to install sliders. The modded rockers look factory! GREAT JOB! Suggestion: Use a wine glass pen to do your markings. Goes on like a paint pen, comes off with a wet rag.

@Marshall-zl9ew 4 ай бұрын

This video is awesome! I just followed each step, and saved myself a bunch of $$$ vs. ordering OEM parts. It looks awesome!

@T4Rgarage 4 ай бұрын

Nice! Happy it turned out for ya 😁🤙🏼

@dru24334 Жыл бұрын

wish i saw this before purchasing rockers. What you did looks WAY better

@dizzle.1983 Жыл бұрын

Thank you so much for limited love

@joshrogers7895 5 ай бұрын

Great vid. I’m in the process… thank you

@zacharycarter9341 Жыл бұрын

I know youve already done the front end swap, but i wish there was a way you could do a front bumper chop on the original limited front bumper

@zacharycarter9341 Жыл бұрын

THANK YOU

@TheSponge945 Ай бұрын

It’s worth to say.. the clips (white) will break if the rocker is removed the way you describe. Before pulling it off get under and squeeze the white clips so they release otherwise you’ll be ordering new ones. Not sure what the dealer charges for these but there is 16 of these for the front and left side.. Amazon seems to carry them but will only know in a couple of days if the quality is good or not.

@Nadirthebottomrock Жыл бұрын

G get free and this last weekend I crunched the passenger side rocker panel while on some trails. Do I even need to replace it, or can i just remove them all together and put rock sliders?

@aksalaman4689 Жыл бұрын

Nice mod!!

@bethneal3498 Ай бұрын

Really enjoyed this video. What brand of paint did you use and where can I purchase it? Thanks again.

@marcosvictorica9040 2 ай бұрын

Is there any way to install. Active cruise control on a 4Runner 2022? ( line control assistance)

@Turbo2D Жыл бұрын

Are you in the lower mainland? Would you do this as a service?

@ragstudios7385 Жыл бұрын

On 13:4 what is the name of the long aluminum pice called? And where can I get one also is there a part # for a 2016 4 Runner limited?

@W84Mee.. 5 ай бұрын

At the 6:40 mark- could you just buy the cap for the TRD pro?

@AJ_Wilke Жыл бұрын

Great mod! Does the moulding still protect the metal under it? Or is it more aesthetic? I’m in between getting the TRD pro rocker panel moulding or going this route

@T4Rgarage Жыл бұрын

It protects the outside edge of the rocker. If you want minimal risk from rock chips I’d get the trd rocker panels or put some sliders or something similar on to protect it. I have the mud guards and sliders

@bostonrules545 6 ай бұрын

Hi there - great video, I plan to do this soon. Apologies if this is a silly question (fairly new to this), but a while ago I had a shop replace my suspension with the Bilstein 5100’s in the front and back. That said, I still see the XREAS center control absorbers on both the passenger and driver side. Is this something that should have been removed or do they still connect to the Bilstein suspension? Thank you in advance!

@T4Rgarage 6 ай бұрын

I would remove it. I have a video on the channel where I removed the complete xreas system

@georgepozzuto4464 Жыл бұрын

I'm looking to replace my OEM running boards, what did you replace them with? Any suggestion on manufacturers that will fit with current mounting spots without any heavy mods?

@T4Rgarage Жыл бұрын

Nothing available but Toyota sr5/trd/trail and they will cost you a pretty penny

@Lyle-1999 9 ай бұрын

Did you buy the Metal Tech sliders for the regular, non limited? I saw they carry OPOR and OPOR limited models.

@T4Rgarage 9 ай бұрын

This pair is for the regular non limited. The design for the limited model hangs down lower

@itschristopherphilip_9765 Жыл бұрын

Question. I have a 2010 Toyota limited. I can’t seem to find any side step rails for sale that would fit. Is it because I just need to take off the rocker panels?

@CharlieSchliesser 10 ай бұрын

I have an SR5, but the 2010’s all have cladding / rocker panels like this that needs to be removed to put side steps in. I’m going to use this video’s method to cut them down and put them back on, because the rockers definitely need this for weather proofing and aesthetics.

@CoH_88 11 ай бұрын

Amazing! What kind of sliders are you running?

@T4Rgarage 11 ай бұрын

Thank you! MetalTech OPOR angled slider. I found a great deal on them locally

@johnstamw Жыл бұрын

Looks incredible man! What’d you do with the mud guards?

@T4Rgarage Жыл бұрын

Thanks man! I put them back on. There is a bit of a gap since I removed some of the plastic that hung down

@johnstamw Жыл бұрын

@@T4Rgarage that's what I saw in the video, just wasn't sure if you had a plan to solve the gap! Can't thank you enough for this video, production value and clarity of instruction is amazing.

@mikesweeney5685 Жыл бұрын

I also like the new look and clearance! My 2015 Limited has step bars that hang down a bit too far for this mod to look good. Maybe I’ll look into getting shorter hangers if I decide to do the mod. I still have XREAS, but I’m getting closer to deleting per your XREAS Delete video as the ride has gotten worse. No hydraulic fluid leaks but I feel every little bump on the road. I only have 65,000 miles on it but I think it’s time. Can you recommend replacement shocks? I’m not wanting to do a lift as I only do some very mild off road driving. Thanks!

@LiquidXiron Жыл бұрын

Bilstein 6112 would do

@mikesweeney5685 Жыл бұрын

@@LiquidXiron Thanks for the tip, I will look into those!

@T4Rgarage Жыл бұрын

Yes either those or the Bilstein 5100s will work great. The nice thing is that they will work with your stock coils and if you ever want to raise the front end a little, it’s as easy as adjusting the spring perch a notch.

@mikesweeney5685 Жыл бұрын

@@T4Rgarage Thanks for your reply, sounds like a great option! I wouldn’t mind lifting the front a bit to eliminate some of the rake. If I go with the Billstein 5100s and keep the stock coils, would the process be a lot simpler than your video on the OME Suspension mod? In other words would I have to remove the UCA and loosen the sway bar? I don’t have an impact wrench, but here in west Texas we don’t have your rust issues, so hoping I can get it done with sockets and breaker bar. I would like to try this myself without paying a shop. 🤓

@T4Rgarage Жыл бұрын

@@mikesweeney5685 If you are just raising the front end by 2nd setting (0.85”) or even the 3rd setting (1.75”) you won’t require new UCAs and could keep your stock UCA. You will have to loosen the sway bar though. Everything else should be the same though. You don’t need an impact wrench

@JAFTX985 6 ай бұрын

Where did you get the matched base coat from?

@T4Rgarage 6 ай бұрын

A place called Rondex. Most auto body supply shops can match the Color and put it in spray bombs for you though, just give them your paint code. Paint code is located on the door plate

@JAFTX985 6 ай бұрын

Thanks for the information @@T4Rgarage

@bigd9778 Жыл бұрын

I’m new to this type of work so this may be a dumb question, but I saw the text comment at the start of the video you have to remove the XREAS. How come?

@T4Rgarage Жыл бұрын

Only if you want to bolt on sliders

@bigd9778 Жыл бұрын

@@T4Rgarage ok sweet. Thanks for the reply. And keep making videos. Some of the best out there!

@T4Rgarage Жыл бұрын

@@bigd9778 Thank you! Plan to come out with plenty more 😎