4Runner Xtreme HID and Xtreme LED Pro Kit from Xenon Depot

4Runner Xtreme HID and Xtreme LED Pro Kit from Xenon Depot - Review and Install

Рет қаралды 47,555

Күн бұрын

H11 HID Kit (5000K):
www.xenondepot.com/H11-HID-Kit...
9005 Xtreme LED Pro Headlight Kit (High Beams) (with CANbus):
www.xenondepot.com/9005-Xtreme...
H16 Xtreme LED Pro Fog Light Kit (without CANbus):
www.xenondepot.com/H16-Xtreme-...
Lamin-x Yellow Universal Film:
www.lamin-x.com/One-6-x-12-Ye...

Пікірлер: 64

@julioc4978 5 жыл бұрын

Best tutorial I have found so far! Props

@CWRhoads 5 жыл бұрын

Great video, I appreciate the effort that went into it!

@vmavk 5 жыл бұрын

Did same set HID works best in low beam than LED

@MarioLoco03 3 жыл бұрын

Just want to commend you for telling us your camera settings and keeping them the same for each test.

@griffey11 Жыл бұрын

dude thank you for making this video. I never realized how poor the stock headlights are.

@sgoldens24 5 жыл бұрын

I have installed HID & LED in my 2010 4runner about 3 years ago & love them , my lights are brighter then my friends 2017 4runner with the same setup. Thanks for the post

@markhaug8525 3 жыл бұрын

I have a 2010 I was looking into converting. Where did you source yours out from? Have they lasted?

@sgoldens24 3 жыл бұрын

I'm using Morimoto XB35 , they also have a 55W system that I bought at the same time but the 35's have lasted till now well since 2012 is when I installed the so when the 35 's go out I'll install the 55W system. The reflectors on the 2010's are much larger & can produce much more light.

@NaijaBoiTellEm 2 жыл бұрын

I definitely looking to get the Xtreme LED Pro Kit. With the DRL Regulator as part of the kit, it seems like a no-brainer.

@shawnsheehan2596 5 жыл бұрын

This was a great video man, well done and thanks

@RajSingh-mx8mp 5 жыл бұрын

Nice video do you video only the hid on low beam no fog. Are these the philips upgrade bulbs. What k

@djfunknuckle3375 5 жыл бұрын

great video. thanks for the info. why the yellow flood lights?

@m3arvin 5 жыл бұрын

I was thinking to go XenonDepot but also considering Morimoto HID. I was just wondering how you chose XD? Great video... Love the split screen and glad you know how to fix your exposure!

@Nightowl82 4 жыл бұрын

@michael184272 5 жыл бұрын

Great informative video Thanks for sharing.. Still no LED for the 2020 4R... Tacoma and Tundra will have them

@Eric2300jeep 5 жыл бұрын

High beams have an odd pattern... did you clock them? No DRL driver? And your fogs are throwing a LOT of glare. Other than that, it looks pretty solid!

@sebastianmonasterio2923 5 жыл бұрын

can you add the can bus to the list of options?

@captainloutavizon2399 4 жыл бұрын

Looks great! What was the total cost for the swap out?

@brianmoto427 4 жыл бұрын

Hey Blaine, after a year of having these installed has your opinion of them changed at all?

@Roaming50 5 жыл бұрын

Would have been nice if you had installed the high beam with the DRL driver. Perhaps it wasn't available when you did this?

@Roaming50 5 жыл бұрын

Blaine Coury Yeah I found it after I posted. I ended up ordering the HID kit with the 4300k Philips bulbs and the XTR Xtreme LED high beams with the DRL driver... I also have the OEM lLED fogs so I’m looking forward to seeing now at night!

@UNKPCRIDE 5 жыл бұрын

Nice work!!

@cj0204 5 жыл бұрын

Did you have to adjust the projectors?

@v90cross2 4 жыл бұрын

This video should get more thumbs-up! lol thanks for the great review and comparison

@TRAININGFLAME 4 жыл бұрын

Did you order the high beams with the PWM DRL drivers? If so, whats the purpose of this?

@sassnchz3906 4 жыл бұрын

Hi, Installed the 9012 XTR HID (5000k) kit on my 2018 Rav4 and it's more than a month now but still struggling to achieve the "Pure White" of the 5000k.... I see the "Pure White" every time I turned-on my headlights but after a few seconds of warming-up it turns to "Yellowish"... In general, does all Xenondepot HID's really requires to wait for a longer burning hours for the color shift to achieve the desired white output?

@TuggerNutts88 6 жыл бұрын

Are you on the Arizona 4runners Facebook page?

@dmb3428 4 жыл бұрын

lumens are off the top of my head so they might be slightly off but....the factory low beam bulbs( 670 lux)are too dim for sure, especially for wet driving conditions at night...I put GE Megalight Ultra H11 +130% (1069 lux) in the low beams which were slightly brighter and whiter than stock but still not good enough so got some philips 65w h9s (1230 lux) and modified them , they are slightly brighter than the GE megalight bulbs and the driving experience is improved over the stock bulbs but Im thinking HIDs are next... Philips 9011B1 9011 in the high beams so I am happy with those, not sure I want to mess with LEDs , I do have LEDs in the fog lights - yellow color diode dynamics H11 SLF (730 lux?) they are nice in pouring rain and snow, much better than white and the LEDs light up a wide path but considering the fog lights take a H16 bulb the H 11 bulb will fit but it's a pain to get in there

@horandestudios 4 жыл бұрын

I have a Question : the DRL mode uses the High Beam lights? I think I dont get exactly how this actually work....

@Jaikool001 3 жыл бұрын

At least in my 2017 Camry, the DRL uses the High Beams but dimmed down (the computer sends a lower voltage to the high beams when DRL is on). So, the CANBus is basically a transformer that will increase the voltage. The High Beam LED will be running a full power with the CANBus. if there is no CANBus, then the LED will flicker because of the voltage drop.

@mikemitchell1455 5 жыл бұрын

Whats the color like on the 5000k

@humblerc841 2 жыл бұрын

I just ordered this setup for mine. It comes with a "relay harness" but I've not seen anyone touch on this point of the instal. Is the relay harness necessary?

@kota11334 3 жыл бұрын

Are the night HIDs 4300k ? Or higher ? I dont wanna blind oncoming.

@canoeshoe 2 жыл бұрын

You need a wiring to the battery for the HID though.

@julioc4978 5 жыл бұрын

What tires you got?

@badbasser98 5 жыл бұрын

Your high beam LED’s are not installed correctly. The LED’s on the bulb should be facing left and right, they should not be up and down or at an angle like yours are. The bulbs should have an adjustment on the collar to fix this. You should see better performance from them when corrected.

@Andrey-np2im 3 жыл бұрын

I found that it is illegal to install HIDs to halogen projectors. Have anyone has such information?

@jarretthall2409 5 жыл бұрын

Why did you choose a HID headlight kit vs LED?

@marcxiong8332 5 жыл бұрын

based on research HID has better lighting. LED creates bad cutoff lines or sometimes none at all, which blinds other drivers. HID has been around for a long time and is developed tech vs LED still in development phases. Also HID for high beams are not great for the sheer fact that they sometimes are quick turn on and quick turn off which HID takes time to light up vs LED instant light up. quick summary hopefully this helps

@gdan8259 5 жыл бұрын

Are you getting any high beam flashing from other cars?

@itsjared 5 жыл бұрын

I bought and installed the HIDs and just took a trip with lots of night driving. Without adjusting the aim form stock, I was flashed probably 40% of the time. It was kind of funny but I do think I will try to aim them down as soon as I get the LED high-beams installed.

@Rhaspun 5 жыл бұрын

@@itsjared I get it sometimes on the factory lights on my Mercedes. I think people aren't used to the whiter color of HID lights. They may be staring right at the lights. The same thing happened when halogen lights first came out. People were use to seeing the regular lights and halogens looked too bright for many people. But people got use to it over the years as halogens became more common. Even I used to stare at the halogen lights when they first came out.

@mb-xv2yb 4 жыл бұрын

why did you go with LED high beams and not HID high beams?

@TRAININGFLAME 4 жыл бұрын

Hids need time to warm up, in the typical high beam allocation people just used them to flash people. In that sense they are worthless as they wouldn't be warmed up and probably wouldn't do much. LED is instantly on.

@Seattle808 Жыл бұрын

Has LED taken over yet? Or is HID king still?

@bdubb4684 Жыл бұрын

HID for max lumens, but the gap is close now. I choose let's for simple install and instant light up at start, with long life.

@Axix23 5 жыл бұрын

Nice video! But holy cow, clean that engine bay!!!!!!! lol

@Rhaspun 5 жыл бұрын

At least it's a dry heat.

@petesosa9517 5 жыл бұрын

Hey did you add the PWM option on the H11 HID kit?

@ELIPSIS1117 5 жыл бұрын

I just ordered the HID kit, and as far as I am concerned, the PWM is only needed if you plan on running the HID bulbs in a system that has DRL's. So, if your DRL's in your headlights are the normal low beams, just dimmed, then you would need the PWM. I think the DRL's in the 4Runner are separate bulbs, so you should be fine. I only got the low beam replacement for now, and the PWM is not needed.

@petesosa9517 5 жыл бұрын

@@ELIPSIS1117 Thanks!

@kaliyang2795 5 жыл бұрын

ELIPSIS1117 how’s the brightness considering it’s only 35W?

@ELIPSIS1117 5 жыл бұрын

Compared to the stock, the new ones are 1000 times better. The white light just illuminates the road so much better than the yellow halogen bulbs. Especially in the snow. I would compare it to the stock high beams, if not better.

@mikeG-zh5zi 5 жыл бұрын

You just saved me $30!

@mikec3454 3 жыл бұрын

Why do 95% of owners replacing bulbs on KZfaq NOT wear gloves? lol That's the simplest way to ensure your greasy fingers don't damage the bulbs. These lights look awesome!

@TheMonkeyman118 6 жыл бұрын

Did you get the 35 or 55 watt HID's?

@TheMonkeyman118 6 жыл бұрын

Nevermind, dumb question, they're only sold as 35 watts lol

@gs8259 4 жыл бұрын

Eh, I'm a fan of not drilling the dust covers.

@jorgenoneya5382 5 жыл бұрын

What color temperature?

@fi7-t6p0SNAPPL.E 5 жыл бұрын

LOL

@mikeG-zh5zi 5 жыл бұрын

Its in the description - 5k

@coasterbrookie 4 жыл бұрын

This light setup is illegal in MN.

@smoothrelaxation5799 5 жыл бұрын

That annoying sound is not normal, that ballast is bad. Once you turn the lights on that sound should go in 1 or 2 seconds shouldn't be make this noise consistently. I do this everyday so I know.