4S MODIFIED MJX 14-210 WITH A MCLAREN 720 GTR BODY DOES 66 MPH WITH VERY MILD GEARING.

Рет қаралды 1,278

2 ай бұрын

MODIFIED MJX HYPER GO 14-210 ON 4S DOES 66 MPH. SORRY FOR THE BAD CAMERA ANGLE.
HOBBYWING SC8 120 AMP ESC
BSR 26MM FOAM TIRES
WL TOYS 2852 4300 KV MOTOR
LOWERED STIFFER HSP SHOCKS AND SPRINGS
26 TOOTH PINION
STOCK SPUR
DUMBO RC GYRO
I NOTICED AFTER THE VIDEO THAT THE SET SCREW HOLDING THE REAR CVD WAS NOT SET AND WAS RUBBING AGAINST THE GEAR CASE. THIS WOULD HAVE BEEN FASTER IF THAT SCREW WAS NOT RUBBING.
I SAW THE NEW PART NUMBERS ON AMAZON, NOT EBAY.
IN THE NEXT VIDEO, THIS CAR WILL BE RUNNING A 30 TOOTH PIONION. STAY TUNED

Пікірлер: 8

@MightyistheRCGamer Ай бұрын

Nice speeds I am impressed and I have a ton of fast RC cars brushless

@andrew4403 2 ай бұрын

Yeah I really like the MJX line. So liking this video is a no-brainer to me. I like the upgrades motor ESC etc. Keep up the good videos like this one and I'll keep watching. Hopefully you're right on the new cars coming out. I'm looking for some upgrades. The 14303 just the same as a 14301 and 302 just different body. I'd like to have something a little different. So far out all these cars there's only two different chassis styles. See you in the next one. 👍

@ofromda860 23 сағат бұрын

Did I see a CT plate in the background🤔💪🏽

@beypudd Ай бұрын

How did you manage with the slack in the steering? My 14210 had a huge slack in the right steering arm, and also has a rally soft servo saver ...How did you solve these problems?

@dexterdcdexter Ай бұрын

Shim the front and rear lower arms then tighten them back downs. Should solve the wobbles for you. Also use larger size screws in the steering rack to eliminate the slop. On the pillow balls in the drive cups, use a little piece of shrink tubing between the screw and the pillow ball to eliminate the slop. That should tighten up the steering dramatically. I hope that helps. I just hit 89 MPH today.