Seat Swap part of video starts at 6:35

You’re a humble dude. Even though you’re a KZfaqr and are not rich nor poor but you’re living comfortable I’m sure your tip to the tech just proved that! Keep pushing the good content buddy

Coming soon: I bought a new Duramax

When you say it's because it's a Dodge when everything that's wrong was aftermarket or broken when you bought it

Thanks for the video. Im doing the same swap in my 06 quad cab. Your video is helpful.

I for one, am LOVING the narrated Timelapse!

Dont know if you read the comments but love the attitude about things going wrong and putting the bad on the channel as well as good enjoy watching bud

Should’ve never got rid of the duramax

3:10 Damn Taylor! Looks like you motor boated a dirt monster!

3rd Gen. Dodgers of the easiest vehicles I have ever worked on I have the 07 Mega cab at it's been nothing but a joy to work on the seat pad I got on Amazon for 50 bucks put it on and 15 minutes without taking the seat Out And they are the best looking Trucks outside of a 1979 Ford

Did you try to use your old jump seat on the new brackets? I got 2010 seats from a local yard for my 07 and didn't know at the time that I needed the jump seat as well. If I knew whether they match up I'll just get brackets...

Decent video and informative about the 4th gen seats fitting in a 3rd gen. One thing that kinda messed with my head a bit is that it would have been a great time to at least vacuum the cab while the seats were out instead of installing the replacements over the top of all that debris. haha, As far as the parts failures on many of today's vehicles I feel that it is because most of the manufacturers no longer make their own parts. Just one of many examples: I had a 2001 Camaro SS with the SLP Package (Basically a lot of the same parts that the Vette had including the infamous LS1 piston slap) The brake rotors would warp between 2K-3K miles. They would just keep replacing them under warranty and I finally asked why they don't just fix the problem by producing a better rotor? Their answer was that they are made by a 3rd party manufacturer and it is cheaper for them to just keep replacing them under warranty than to have GM start making them. That is the dumbest thing that I had heard. This is a huge part of why we can't have nice things anymore. As far as the design of 3rd gen Dodge Ram is concerned their HVAC boxes Suck! Broken blend doors and diverter doors are a stupid design and a PITA to repair all of the different doors in that box. I still love my RAM but like any other truck that I've owned it's not without issues. Thanks for the video.

Taylor, this was a huge help. I have a Gen 3 quad-cab myself and have been wanting to swap out the front and rear cloth seats for upgraded leather seats. Knowing the Gen 4's don't require a major modifications was my biggest question. I like the truck without the spacers and I think it's better to have well fitting shoes on the truck, especially when you are towing that amount of weight. Have you ordered a new vent cap for the trailer, or does it still get wet inside when it rains? She just needs some thorough tender care, not quick fixes.....because she was not maintained as well previously IMO. I have gotten as high as 26 mpg in my manual 3500. Empty of course.

You have to vacuum the carpet before the install of the seats.

Still waiting on the turbo C10 build

Should have keep the chevy

Love the truck videos

I don't usually post, so I feel remiss in posting something critical. My guy, your videos are awesome. Your content is awesome. BUT....why you no vacuum out the floor when the seats were out. Just saying.

Really like this channel because you havent bought a totaled super car to rebuild yet

I highly recommend picking up a bissell portable spot carpet cleaner they are sub $100 and they are perfect for cleaning vehicle interiors

THANK YOU FOR MAKING THE LINKS TINY AT THE END

U need to talk to Greg a on KZfaq 👌🏿

I bought a 4th gen console for my 3rd gen, will it work with 3r gen seats or only the 4th gen? thanks

Man..... Crazy... If i seem red flags i would check and recheck everything.. know you know.. when getting sests.. believe their is quad cab crew cab and mega. And a think a classic.. quad cab is normal seats and doors up front.. back is smaller doors and not to great of a leg room.. a crew cab is a full 4 door seats which the back is more legroom then the quad.. and the mega cab is so much soace in the back can possibly stretch your legs..and finally the single cab... Only the two seats no backseats at all..am also excited for mine.. i took a least 2 weeks finding these seats.. finally getting them shipped!! By the end of this week of mid week next week i whould habe them.. its from a 2015 all leather blacked out 450 for front seats and back.. putting it in a 2003 quad cab.. 6 inch lift starlights black suede uptop. Touchscreen. Remove old plastic and get all leather dash. 1000 dollar headlights revese kight leds. And remove the bumper for aome steel bumper up front and back.. see who can install sensors on them.. to not crash into other cars crushing them in the process😂😂 has 35 might go with 37.. but also removing the back window with the middle able to open the window for fresh air.. and replacing the center concel with same yr but just leather.. removing the dash and upgrading it to newer look... Has a led bar up top for dark areas... What else is there to do.. amd lastly big biy upgrades with brakes and pads and rotors. For heavy tires.and shocks with coils. To make the ride too quality.. rims in brown color.has allqays been my dream to oneday rebuild the truck to a bit more modern. Up to date.. and the most expensive is ceramic tint all the way around and get the fog lights to work. 15+ yrs strong and just dont want to let go of the truck. Am 23 now and just need that final touch after all this and get it in candy blue with heavy flakes.. and a reverse camera with touchscreen...

Sun coast transmissions make amazing transmission for rams, the platforms are amazing just gotta do them up right

What years front seats will fit in a 2003 Dodge ram 1500 reg cab. Thanx

I have the same truck and I have been looking for spacers, what spacers do you have?

All you need is good drill set and some large torx set and just drill a nice hole then pound the torx in and work it out with PB or some other penetration oil usually works for me anyway

Did you torque the lugs to the correct specs? Cause that's kinda why you do it

What year and model of truck did those new seats come out of?

Looking like a Diesel Mechanic!

I bought 4th gen seats for my 3rd gen, can I use 3rd gen middle seat with 4th gen seats?

Will those bolt right up in a 2002 slt quadcab

*We were right... there I said it... no I don't feel any better. Thanks for sharing this.*

Time for windshield wipers !

Man, please keep the dodge, for real it's an amazing truck, once you get through those annoyances! Itll be well worth it!

Thinking about swapping them in my 3rd gen single cab

I as a person living in Oregon (24+ years) laugh at your rain talk.

Super helpful if you say how many bolts and what size.

Nice to know I can swap out my seats for a 4th gen

I’m looking at a 2006 Mega cab. I’m thinking 4th gen seats for sure. Or remove the seats from my 09 Yukon?

you gotta get an air matress for the mega cab rear seat section dude thatd be perfect for sleeping in at events

Pro tip always add grease to your lug nuts the newer the vehicle's the worse the thread or nuts! Good luck

The dodge is still the way to go. Take care of all the dumb shit and the truck will take care of you

thats thise cheap aftermarket lugnuts man id get some good dorman brand lugnuts and throw those ones you have as far into the woods as you can ... :)

I live in Inverness FL. Able auto is a great mechanic shop.

do you want the duramax back?

I've had the same problem with lug nuts like that

Those are not just Dodge problems. My 2000 f250 7.3l. rubbed cooler lines went out, injectors bad, injection pressure sensor died, back pressure sensor died, and my passenger and back seat is warn. My 7.3l excursion different issues but same amount. That the deal with diesel work trucks. My wife hate my truck but I love it.

Looked like s with the spacers and you will delay replacing the front bearings for a while ... already well whipped ...

Yeah sorry dude I’ve come to the conclusion that 3rd gens suck. I stand by my second gens all day but you will need work. I prefer the 12valve Cummins because its more reliable than a 5.9 24 valve. Im completely dumb about the 6.7l? cummins but would give it a shot for a fourth gen ram.

I bought a plasma cutter for getting locknuts off.. 😂 I feel you!

My dad has a 4th gen Ram 2500 and I've done numerous roadtrips in it and i can say from my experiences that those seats are very comfortable.

I think the seats look good

Get some black headlights like durtymaxjack. Also u should definately have bodevision prime it and paint it in paint match raptor liner.

That part has nothing to do with Dodge..... That's the cheap Chinese lug nuts 🤔

Gotta love a reliable duramax!!

AC for the 06 dodges went out and I believe was a recall... my shit doesn’t work but fuck who needs AC when you’re hauling ass?

10/10 support that Buc-ee's shirt.

Just let it be a brodozer Taylor

How much did you pay for those seats?

It's not that it's a Dodge it's that it looks well abused by the previous owner. The trans lines is an issue I ran a new factory set and got a couple years before they rubbed through. So I changed everything over to teflon lined steel braid.

but I also have a 2001 Dodge Ram 2500 diesel and I changed the front seats and center console the seats came out of possibly a 2016 or 2018 Nissan Titan the biggest truck that Nissan makes but the seats fit perfectly in my 2001 Dodge I just had a drill new bolt holes but the width the height was perfect it's not like I had a big spaces between the door the seats look like they were made for the truck the guy I bought them from must have crashed his truck but the seeds were brand new

🎵🎵 I got new seats in the front Old 1's in the back I drive a Dodge truck And ma wheels are frickin' black 🎵🎵

Seat covers front and rear. Floral pattern.

Duranax mennn why you get eid of it😩😩

didnt even try to clean those new seats haha

Taylor, how are the Lionheart tires treating you? I was thinking of ordering some for my Tahoe.

Put a 4th gen front bumper on this!

Would you be interested in some afe items and a brand new banks intercooler for it. In exchange for a huge price cut and put some control arms on?

Any truck that is that beat up is going to have issues, Ford Ram, or Chevy. Come on man!

the problem that you're having with your AC I had the same problem with my Dodge Ram pickup the system needs to be charged it's just how it comes in two the cab it goes from the driver side to the pasture side and by the time it gets to the passenger side AC is warm because the heat of the motor so I brought it to a mechanic and he just maybe go get some AC Pro stop leak put that through evacuated and recharged my truck and the AC was fine

I just watched this video twice

Gonna eventually put 2nd gen seats in my 1st gen

If you win the next comp, you are a God. Hope you do because you deserve it.

How much did the seats cost?

haha so true, driving through the rain has made us floridians pros, now that I'm in TN we don't have a lot of rain but when it rains it pours. I just continue through the roads while everyone else has either slowed to a crawl (which isn't safe) or pulled over.

Truck looks way better without spacers. Good call!

Plus it sounds hella cool

I'm still so sad you got rid of that clean LB7 for a giant turd

You should have cleaned the seats before you installed them. "water spot" from some spilling coffee in their lap.

im moving to tampa from Nc in about 4 weeks. Am i making a mistake :O lol

WHEN YOUR SAYING ALL THE BAD THINGS OF THE TRUCK ALL I HEAR IS VIDEOS COMING LET ME WATCH THEM ALL BRING THEM 🙌🙌👌👌💪🏻💪🏻💪🏻💪🏻👊👊👊...

I must have missed the episode where you fix the AC, what was it?

Hey Taylor Ram became their own brand in 2009 and were not under dodge anymore, the 4th gens are great trucks and I wouldn’t choose a ford or Chevy over a 4th gen ram Cummins, you know nothing can beat that 6.7 Cummins and working on it is 100x easier than a Chevy or ford! I suggest you invest in a 4th gen they’re dropping in price as well since the 5th gen came out.. good luck on your tow rig setup! #cummins

*gets 5 seconds into video* *types "I told you so"* *resumes video*

6:30 ish when Taylor’s talking about the rain I’m just here like yeah that’s the normal weather in England. Out of state people doing 30 English people doing 90 coz we’re probably late for something

How I look at cars when they break it can happen to any car can even happen to brand spanking new cars that drive of the forecourt it part of the parcel of ownership of cars

I know there are a ton of I told you so's. BUT like I said Duramax for the win. : D

Should of kept the Dmax

I'm on record for saying keep the Chevy... Good luck man

Jenky like the time I put 89 Toyota tercel seats in my 89 Toyota pickup? Yea it was weird..

Idk if you have fix the spacer issue you’ve been having! But you should get BORA spacers. Best in the market.

You should definetely get those seats steamcleaned, that driver seat is nasty

I’m pretty sure those are the EXACT same Autozone lug nuts I have on my truck. Maybe I should get different ones... or maybe I should just never take them off again

Dude, you can keep all that rain. Up here in north Ga, it's been raining for 3 days. Like dark outside at 1pm and rain coming in sideways. bleh!

Are those tree of gondor from the lord of the rings gauges you're wearing? It's an odd question, but I just noticed it.

I did this in my first Gen on my channel haha

Did you suck the lugs down with an impact? Sounds more like over torquing than "dodges" fault, assuming its even the original hub.

Dude I need seats for my 03 2500 Dodge Cummins.