4x6 H4 Headlight LED Conversion (1982-1992 Camaro)

Рет қаралды 8,625

2 жыл бұрын

H4 LED install in a 4x6 glass housing
Covers 1982-1992 Camaro
lense:GS Power OEM style 4 x 6 inch Glass Lens
LED bulb: BEAMTECH H4 LED Headlight Bulb, S1 Series 10000LM
Song: 3rdGenGuy Repair1181 by Stephen Bagnell (Copyrighted)

Пікірлер: 40

@ad9camarors 19 күн бұрын

Awesome video, thank you so much. Cant wait to do it to my car😊

@BackPainGarage 2 жыл бұрын

I did this years ago on mine with HID's. Its also very easy to use a pick or similar tool to release the pins from the original connector and swap them over. Now that I'm doing my LS swap I'm going to be completely re-doing my headlight harness to run through a relay box, ceramic connectors, wiring for the good ol' 4 high mod and giving LED's a try.

@michaelhmfic8346 2 жыл бұрын

Like those housing much nicer then mine. I had to modify the factory light buckets

@netburnr 2 жыл бұрын

This same re-pinning is required on the Holly Retrobrights as well. Just had to figure this out myself

@erikchartier8839 Ай бұрын

Your videos are the best! Just bought a similar kit. Was kinda clueless as to how to connect the bulb to the existing Camaro socket. I really didnt want to modify the vehicle side at all. Still a little confused as to which wire goes where so ill just keep rewatching until i get it right lol! Also not sure what to do with the high beam 2 wire socket.

@247willg 2 жыл бұрын

Good video, I will now upgrade my 85 T/A headlamps.

@tj_gsomething_ 2 жыл бұрын

I have an '86 TA. DO NOT buy a halogen housing and put LED bulbs in them. Buy a H6054 LED housing. Trust me. Halogen housings with LED's don't have a good light pattern, and they blind other drivers. Google H6054 LED housing.

@247willg 2 жыл бұрын

@@tj_gsomething_ my man,, wonderful information . I will apply to near future conversion.

@michaelhmfic8346 2 жыл бұрын

@@tj_gsomething_ it depends on the housing as they are all not the same. The same goes for the 4x6 led headlights.

@shugg0517 2 жыл бұрын

Great Job . I have a 92 Camaro that I'm putting a Ls1 into .Do you have part numbers to the products you used in the video ?

@tonywillkomm3991 2 жыл бұрын

Hi, I followed your video and replaced the outer headlights, what bulb did you use for the inner high beam 2 plug setup? Thanks for the informative video.

@jasonlambert154 7 ай бұрын

I chose Holley Retrobrights from Headlight Revolution. With their added harness I'm running 4 low beam and 4 high beam :)

@shalunm 2 жыл бұрын

Where did you buy it(h4 led)?

@burgerzz09s51 5 ай бұрын

Can you replace the high and low beam with these. Or does the high beam just use different bulb with different wiring?

@3rdGenGuy 5 ай бұрын

the H4 LEDs have high and low. so you can wire them up on the high beam side as well. the high beam plug are only 2 wires vs 3 like the low beams.

@davidloya6946 2 жыл бұрын

Have you seen or tried to get Halos like on a 5th gen camaro? Thats what im trying to find for my 87 IROCZ

@tj_gsomething_ 2 жыл бұрын

Google h4651 halo light

@dingley00 2 жыл бұрын

do you know if the pigtail adapter is needed when doing a third gen firebird?

@pirateofms 2 жыл бұрын

I didn't use one on mine, and everything *seems* to work ok.

@newyork4198 2 жыл бұрын

Not a fan of the new Holley retrobrights? Their beam pattern seems to be legit, on par with a new car. Also, can you do left/right adjustments on our cars? I’m thinking of doing quad bi-led’s :)

@3rdGenGuy 2 жыл бұрын

The Holley stuff is getting crazy pricey these days. i did all that for $100 holey wants $179 PER housing lol

@neutronstarlord5716 2 жыл бұрын

I replaced my 92 firebirds halogens with LEDs. Halogens had better color in my opinion but I like to see at night lol

@ScavengeEh 10 ай бұрын

Do you have the links to where you bought the LED's themselves?

@3rdGenGuy 9 ай бұрын

amazon and eBay sells em

@jsting23 2 жыл бұрын

Are this the same for high beams? Also can you please provide us the link for this headlight

@3rdGenGuy 2 жыл бұрын

high beams are the same. my High beams don't work so i didn't swap them. Unfortunately the housing have been our of stock for a while cuz the Coof supply chain issues.

@goratgo1970 2 жыл бұрын

@@3rdGenGuy I had to use the same wire location change in my 91 when I installed H4 Halogen bulbs in glass housings since all four bulbs are three prong. for brights, it was ground to top, green to RH. All four function fine.

@Avi8tor857 2 жыл бұрын

Got a link to the housing?

@3rdGenGuy 2 жыл бұрын

idk if they even sell them anymore cuz the vir*us stuff. it's a "GS Power's 4 x 6 inch H4 Glass Lens"

@andynuck1772 8 ай бұрын

I know you said that your high beams didn't work, but I have a question. Would these GS Power's headlight housings work for high beam and low beam? Is the difference just a bulb?

@ToriL97 2 жыл бұрын

When I did this on mine the drives side light is a milky color and the other is normal.

@kentuckytim4443 2 жыл бұрын

@Tori L check your connections, they could be corroded, creating a bad connection, which could cause your light to be off color.

@harshvardhansingh1780 2 жыл бұрын

Won't this blind people with it's weird throw pattern?

@tj_gsomething_ 2 жыл бұрын

Yes you are correct. LED lights don't belong in a halogen lens. They need a projector lens.

@3rdGenGuy 2 жыл бұрын

A million ppl are gonna say those LEDs blind people. Mine don't. I made 100% sure by parking my Camaro behind my brothers car at multiple distances. no issues with blinding other drivers. even followed a local race buddy and he only said the lights were noticeable, but not blinding.

@harshvardhansingh1780 2 жыл бұрын

@@3rdGenGuy What about oncoming traffic? That's what I am concerned about. I'm routinely blinded by unfocused LED lights coming from oncoming traffic. Even when its lown beam. Idiots driving on high beam all the time are another discussion.

@tj_gsomething_ 2 жыл бұрын

@@harshvardhansingh1780 You can even see in the opening, and closing scenes how high the light is. The top of the tree is lit up!!!

@3rdGenGuy 2 жыл бұрын

@@harshvardhansingh1780 never been flashed by anyone. they aren't as bright as the camera makes them out to be. back in high school my 92 had the high beams stuck on and man did I get a LOT of ppl flashing their lights at me lol

@tj_gsomething_ 2 жыл бұрын

You should NEVER put LED bulbs in a halogen housing. LED bulbs need to go into projector housings. Don't believe me? Google it! If you do, you will be that blinding Awhole car that everyone hates. You could also cause an accident.

@3rdGenGuy 2 жыл бұрын