What lube was that? 02:43

Tri-Flow@@SavageAudits

🙏🏻🙏🏻

Knew someone might!

Thanks Derek!

My guy!

✊🏽

Known fact

" It goes in the crack "

Literally, do everything he just showed you. But there's nothing better than Nrw Bike Day...

That’s a good one! Thanks!

Replace tyres, inner tubes, lube chain & and replace brake cable inner then see how it goes and the bike will tell you what else needs doing.

@@mikehagen3785 truedat

What upppp

💯🤝

Might need to get them just a hair tighter

Nipple lubricant. Just a drop on each spoke nipple, once a season. This will keep your spokes happy, and will prevent seizing.

Also where the spokes rub together can make noise if they are a bit older!

You could try rubbing a little candle wax on the spot that the spokes cross.

Oil your chain, grease everything else

Triflow

Brakes catching the rim? Wheels tightened too much crushing the bearings?

End of summer

Pinchers of power!! lol love that…. Imma go watch it right now

@@eelson2 hahah we both had it wrong. data says "pinchers of peril" i was way off haha

@@draleigh8881 hahaha we both win cause we both got to watch it again!!

Is it the hub/axle coming lose? Or the bolts on the outside of the dropout slots?

Might need a more thorough truiing

Wheel or tyre?

No it’s junk

Do not even try it..That frame has stress just like a helmet when you crash,even if you bend it back or can't see it,it already lost its integrity the metal is weakened

If it's an aluminum frame, forget it.

if its like one of those cheaper 410 or 510 chains they're bound to making bad sounds n stuff without lube, the only solution I would know is buying a new chain, otherwise u may have to keep lubing it. Old 410 chains dry up extremely easily and stretch.

That can happen because the sprocket and crank are not aligned properly.

Chain specific video on here

Lube it

✊🏽✊🏽

kzfaq.info/get/bejne/ad2ogK5n29i9f5s.html

@@AlfredoMancuso 🙌🙌🙌

I love harry main!

My dude!

@@AlfredoMancuso much love and support always from Trinidad and Tobago bro 🇹🇹we're lockdown here still about two to three months now hopefully opens back up in July so I can ride with my bros

Free coasters have a ton of play and it also depends on what type of internals your fc has aswell try using Grease

@@juliangaribay4711 I did grease it and the spokes are trued I don’t know why It sounds like i didn’t tighten the locknuts

@@rudylopez5541 it's most likely the internals they use some fc hubs come super loose stock out the box go to the shadow website for hub info and how to adjust slack or sometimes if the hub uses poly bushings they're probably blown out or wore out and making it loose that's why it makes that loose sound also sometimes if you're frame is warped on the drop outs when you drop your bike it'll make a creaking sound because the bolts shift on the dropouts But yeah fc hubs usually have alot of play in them because of the internals or slack adjustment most likely it's the clutch rattling inside of the hub ask others that have your hub ask them if they're hub has a ton of play or slack but typically all fc hubs have this problem aswell the planetary hub or bsd hub use similar internals just different dimensions or features these hubs are new and use different internals conpared to primo stranger bsd federal etc hubs that use like a khe fc internal style yeah these hubs do have differences but typically use similar internals because it worked and wasn't hard to understand the internals and back then fc hubs were still being developed and was kinda hard to really advance the engineering on fc hubs... always check specs and features before buying parts

@@juliangaribay4711 everything’s tighten and then I get my bike and shake the wheel it’s nothing from the inside I think you probably just have to really crank down on the lock nuts because I watched a KZfaqr talk about it

@@rudylopez5541 did your hub have a washer or spacer between the locking ? If it's missing that washer is needed

Crushed wheel bearing maybe.

Tri-Flow

16483 Magnolia St. Westminster, CA 92683

😂😂😂

I replace the bb or headset lower bearing as soon as they make the slightest sound or feel tight. 😃

@@robertlund5694 try this method before throwing out bearings

Bro. It's called a comma or a period. Utilize them, on occasion.

@@spacetimeworm I ain't your bro first off

@@juliangaribay4711 .........

fr i will watch some his videos then click off bc of the quality

💯✊🏽

MT juliet on my st Arch

😂

We didn’t do that lol

@@AlfredoMancuso damn, these bots crazy