5 common errors that X4 users make!

No video

5 common errors that X4 users make!

Рет қаралды 10,241

Күн бұрын

In this video I’ll talk about the 5 most common errors that X4 users make in building/running/setting up the car! Perhaps you’ve done some of them yourself? Please watch the video to find out!
Chapters:
00:00 - Introduction
01:18 - Front body height & body upstops
05:12 - Steering EPA/steering lock set incorrectly
09:15 - Battery mounted without play
12:29 - Anti-roll bars mounted without play
15:47 - Belt tension too tight or too loose
Music credits: Indie Box - A Better World

Пікірлер: 20

@Rob-vv5yn Ай бұрын

Gone from pan cars to spec touring, so lots to learn and this is really handy for getting upto speed fast. Thanks Alex

@cosimomarotta9552 11 ай бұрын

Thank you, Alex. Very useful tips.

@hadinizal3736 11 ай бұрын

Great useful advices that I could applied some to correct my errors. Thanks Alex !

@Dizzie20vt 11 ай бұрын

One small point regarding the steering EPA. Make sure the D/R is on 100% before you start adjusting the EPA

@dmatter827 10 ай бұрын

So what if you need more steering when its out on the track? Your topped out already

@Dizzie20vt 10 ай бұрын

@@dmatter827 if 100% on D/R is on the stops there is no more steering to be had. I usually end up turning the D/R down to about 80% anyway

@cs8sz 7 ай бұрын

Incredible video! Thanks

@midwestboss8808 11 ай бұрын

This is super helpful thanks!! Do the X12 next!!!

@OliverThib-ci8tj 11 ай бұрын

Thanks Alex, I got it all wrong! thanks to you everything will be back to normal.

@emanueledenisangelini3847 2 ай бұрын

Thank you Alex!!!

@herec0mestr0ble 10 ай бұрын

Everything he mentions I’ve come to figure out on my own after years of racing. I agree with everything he said. Long story short, you want your onroad car to be competitive, you have to take every single setting super seriously and everything has to be as perfect as humanly possible. If you rebuild your car in a couple hours, you’ve already failed.

@carlosarroyo5262 10 ай бұрын

Guilty of 3 of these.

@ryanfox2488 11 ай бұрын

This is great! Can you do a video for the X12?

@hagberg 11 ай бұрын

Good idea, perhaps I will in the future.

@gid1880 11 ай бұрын

I really appreciate your youtube channel, even if i don't own any Xray touring car. At the moment i am getting into mod racing. i am a bit confused, which wing options i should have for twister or twister speciale bodies. There are precut wings from 0 to 4° angle available from Xtreme. Which wing options do make sense? Should i mount 0,7mm wings on 0,4 od 0,5 mm bodies?

@hagberg 11 ай бұрын

I would not get the precut angled wings for mod racing. For mod racing, mostly, I use a light (0.5mm) body for outdoor racing, sometimes even UL (0.4mm) if the track is flat, grip is high, and if it isn't too windy. As for the wing, I usually use the supplied wing but in L (0.5mm) thickness, since the 0.4mm wings are usually too flimsy.

@gid1880 11 ай бұрын

@@hagberg Thanky you!

@MetalMathiasTP 9 ай бұрын

Hi Alexander, Iam looking for a good basic setup for stock racing on a low grib asphalt technical track. Iam currently running the Basic Asphalt Setup I found on Petitrc for the Xray X4 2023. I would like to get better grip, do you have any recommended setup sheet from Petitrc that I can maybe use as a reference. I noticed some setups require alot of shims that is not provided with the kit, so it would be nice to have a pretty standard setup for low grib, technical asphalt track that doesnt require this if possible. Any help is appreciated.

@hagberg 9 ай бұрын

Hi Mathias, please take a look at this stock set-up from my home track for the X4'23. It's low to medium grip at best, using Matrix tires. Let me know how it works! As for shims, unfortunately, a few different ones may be needed. I really recommend purchasing shim sets from XRAY or Monaco RC/Officina RC. setup.teamxray.com/sheet/view?userSheetId=22191&search=hagberg