5 min Steering Damper Change // Ford Super Duty
Рет қаралды 103,273
4 жыл бұрын#steeringdamper #bilstein #superduty
Super easy job you can do right at home with the right tools.
Endurance Kennels is the official KZfaq channel of sprint musher Tone Coughlin. Subscribe now to be updated on the latest videos.
For more information on Endurance Kennels LLC, dog sled rides & tours in Duluth, MN, endurance hounds, and eurohounds, how to build dog houses and make ganglines, visit our website at: www.endurancekennels.com
Get Social With Endurance Kennels:
On Facebook: bit.ly/2QraKJZ
On Instagram: / endurancekennels
On Twitter: / endurancekennel
On KZfaq: / tonecoughlin
@nativeoutdoors1780 2 жыл бұрын
I don't laugh at KZfaq videos like at all, but the way you said, ooh ribbed for pleasure on her side, caught me absolutely off guard lmao
@ojmcbaggins 3 жыл бұрын
Your rusty truck makes me feel good about my rusty truck! Thanks again for the info!
@rickbrown03 2 жыл бұрын
I was thinking the same.
@danielson2454 2 жыл бұрын
99 problems but Rust ain't one.
@darrylm3627 2 жыл бұрын
Good Stuff, Great Tips👍🏿😀
@ColtonBlumhagen 10 ай бұрын
I love how we go from hammer hammer hammer on the pickle fork to bam it's in. lol
@endurancekennels 10 ай бұрын
That's how I roll 😎
@jameskulisek1550 3 жыл бұрын
Can you post part number or link of damper?
@joeyquinney4032 2 жыл бұрын
870-50 had me cracking up lol
@mitchbrockman4399 20 күн бұрын
Why use an impact gun on one bolt and not the other? Should the fasteners be torqued? Thanks.
@endurancekennels 20 күн бұрын
Bad angle.
@ricardocorsa9077 2 жыл бұрын
Im doing the same thing in my 2012 f250, I can feel a the wobble not really bad, but i want to fix it before it gets worse ,would this really help? Thanks for showing how to get this done great video.
@endurancekennels 2 жыл бұрын
The wobble isn't from the steering damper. Could be ball joints and tie rod ends.
@westtexasdave2140 3 жыл бұрын
Were you getting a death wobble before you changed it?
@endurancekennels 3 жыл бұрын
No
@OltonBradly 3 жыл бұрын
Do you use two of them or one I have 2011 f350 all stock
@endurancekennels 3 жыл бұрын
Just one on my truck I could see two if you do tons of off roading.
@haydendavis2089 11 ай бұрын
I know you posted this video a while ago… what kind of pry bar is that to wedge between the bolt? I cant get that out to save my life.
@endurancekennels 11 ай бұрын
It's a tie rod/ ball joint fork.
@raymondsalinassanchez9639 3 жыл бұрын
Did your truck shake alot before replacing?
@endurancekennels 3 жыл бұрын
No.
@islanderson691 3 жыл бұрын
I have a 2017 f450 and as far as I can tell when trying to buy one for my truck they don't make any so it stops at f350 due to the f450 having a wider front end making for tighter turns than the f250 and f350. If you know were I can get one that fits please let me know. Thanks
@endurancekennels 3 жыл бұрын
Interesting. Did you try Napa?
@islanderson691 3 жыл бұрын
@@endurancekennels yeah, Napa can't even get me locking lug nuts for my truck
@endurancekennels 3 жыл бұрын
Ah man that sucks. Have you tried calling a drive line specialty shop? We have one in the neighborhood I bring my truck there for all that stuff.
@islanderson691 3 жыл бұрын
@@endurancekennels I have but I'll check a Some specialty shops and see if they can get one.
@cliffordduzz4342 Жыл бұрын
The beautiful bilstein looks out of place with all the rust but you made my decision on getting one myself on my not that rusted southern 2005 Ford f250 super duty truck
@endurancekennels Жыл бұрын
Everything is guaranteed to rust out where we live 😂
@ALEXELY925 3 жыл бұрын
What are the symptoms of needing to replace it? Good video.
@endurancekennels 3 жыл бұрын
When the old shock is blown that's when I replace them.
@ricosplace1 Жыл бұрын
If you start getting “bump steer” then time to replace.
@jjsemperfi 10 ай бұрын
@@ricosplace1 My brand new Bilstein Steering damper bump steers so…
@ricosplace1 10 ай бұрын
@@jjsemperfi Sounds like you have some other front end problems. Time to check all your front bushings and ball joints.
@h1ghy1eld25 3 жыл бұрын
my truck has a ball joint attached to one side
@SeaPro360 Жыл бұрын
Step 1, the day you place the order is to spray those bolts/nuts with PB blaster or 50/50 atf acetone mix.
@endurancekennels Жыл бұрын
Basic knowledge 👍
@josepina4622 3 жыл бұрын
did you replace it for any specific reason?
@endurancekennels 3 жыл бұрын
The old shock was toast seals puking out it's guts.
@haydenpostma9790 4 жыл бұрын
Is your truck on jackstands? Or you just doing it while its parked?
@endurancekennels 4 жыл бұрын
On the ground lots of clearance if you don't mind lying on your back.
@Whyknot80 3 жыл бұрын
Is this a Catrina flood rescue truck?
@endurancekennels 3 жыл бұрын
WI originally. Lotsa salt and rust there bud!
@kevinburroughs6583 3 жыл бұрын
What size bilstein shock did you use for this replacement? How much better did it make the ride? Does it affect your towing?
@nativeoutdoors1780 2 жыл бұрын
He got the 5100 series and it's quite a bit beefier than stock which is really good, I'm about to do the same change on my truck and I'm interested to see if there is any change
@donpatton1246 2 жыл бұрын
@@nativeoutdoors1780 so what was the outcome???? Looking to do the same with my factory shocks on my 2016 Superduty
@nativeoutdoors1780 2 жыл бұрын
@@donpatton1246 so I replaced all the shocks with Bilstein and the ride quality definitely improved, then I replaced the front dampener with a 5100 series and I didn't feel any difference which is good, I didn't want heavier steering from the beefier shock.
@nativeoutdoors1780 2 жыл бұрын
@@donpatton1246 oh and my truck is an 2008 so the same setup suspension wise and chassis wise as your 2016, so I would think you would enjoy the shocks, apart from looks which I really like, I also just liked the improved peace of mind and ride quality
@z0sickvett60 2 жыл бұрын
What’s the part number on the shock? 5100?
@endurancekennels 2 жыл бұрын
I don't recall, sorry 😬
@ojmcbaggins 3 жыл бұрын
I broke that lower bolt my first time. I'd be interested in finding out what spec its supossed to be torqued down to
@endurancekennels 3 жыл бұрын
Ya I hear ya! Call the dealership service department they are always good with torque specs.
@ojmcbaggins 3 жыл бұрын
@@endurancekennels they are company specific torque specs. I found the bilstein is 67ft/lb Upper, 26ft/lb Lower. Rancho directions say 35ft/lb on both for their stabilizer. Strange.
@Rob-tx3jl 3 жыл бұрын
@@ojmcbaggins different companies different designs different materials, nothing weird about different torque specs.
@theosinitsin3906 7 ай бұрын
@@ojmcbagginsthanks for posting the torque specs!!
@JuanRodriguez-bn8xr 8 ай бұрын
Did you need an alignment after changing it?
@endurancekennels 8 ай бұрын
I did not.
@BenDover-ut4cj 3 жыл бұрын
My 01 F250 doesn make a complete left hand turn, could thi be because the stabilizer is too short ??
@endurancekennels 3 жыл бұрын
I don't think so it's probably because the wrong parts were installed.
@BenDover-ut4cj 3 жыл бұрын
@@endurancekennels wow thanks for getting back with me. I think the aftermarket stabilizer is too short for my truck therefore making a left hand tight radius turn is impossible. The stabilizer is about 20”-22” long and I think I need at least 24”
@josepina4622 3 жыл бұрын
Do you think that the steering stabilizer could be causing sloppy in my 2015 4x4 F-250?
@endurancekennels 3 жыл бұрын
Probably not have you checked your ball joints and tie rods?
@luthoriousOG 3 жыл бұрын
Also the steering box itself
@nickgarza4124 3 жыл бұрын
"It's ribbed for Pleasure" Get the duck out of here that's hilarious.
@robertbaldeo7313 4 жыл бұрын
What year truck is this
@endurancekennels 4 жыл бұрын
2008
@waynebarnes1369 Жыл бұрын
Looked like that bracket was broken. The very first bolt you took off.
@endurancekennels Жыл бұрын
Not broken
@Boeinguy 2 жыл бұрын
WT? You skipped over the removal and right into the new one being there?
@endurancekennels 2 жыл бұрын
I'm sure you're smart enough to figure that part out 👍
@rvadventures 3 жыл бұрын
For the love of God put some paint on these trucks if you live in a salty state! Lol
@darrylt1031 2 жыл бұрын
you use your impact driver on the bolt with more difficult access, then don't use it on the easy access bolt....what gives?
@endurancekennels 2 жыл бұрын
Don't want to melt the nylock
@dickfitswell3437 3 жыл бұрын
What size socket
@endurancekennels 3 жыл бұрын
Can't remember 17 or 18mm
@dickfitswell3437 3 жыл бұрын
@@endurancekennels Thanks. I was able to change mine out in the parking lot at Holiday Inn Pine Bluff Arkansas. The 🥒 fork is a must have. Well that or a arm that kicks like a horse. No way could I get mine with out that picklefork
@troyingram8167 3 жыл бұрын
I have a 2001 f250 super duty and it don't even a steering stabilizer on it
@endurancekennels 3 жыл бұрын
Dang!
@ManuelPerez-oz3dn 11 ай бұрын
Mine didn’t either
@LemonySnicket-EUC 3 жыл бұрын
But did it make a difference ?
@endurancekennels 3 жыл бұрын
Of course.
@Silverxxx450 Жыл бұрын
Did you have wheels turned all the way to the left side?
@endurancekennels Жыл бұрын
No, straight
@michaelreis9141 11 ай бұрын
Washington the first time he used a ratchet?
@sxsextreme5444 4 ай бұрын
Like how it said 5 minutes and then jump the video to the new damper. Being installed five minutes my ass..
@endurancekennels 4 ай бұрын
Some folks have skillz 👍
@zyre2503 3 жыл бұрын
Whats the part number?
@endurancekennels 3 жыл бұрын
Dang good question it's not OEM bought it on Amazon.
@Theo8863 3 ай бұрын
Fluid film would stop all that rust.
@endurancekennels 3 ай бұрын
It's Minnesota. We eat rust 👍
@BD5243 11 ай бұрын
What a cop out out cutting the video short to see how long it took for the fork to separate the shock.
@endurancekennels 11 ай бұрын
Skills are free they don't cost time 😁
@Boeinguy 2 жыл бұрын
Wtf? You didn’t finish showing the removal?
@chrisharding2813 3 ай бұрын
3:44 what happened lol, never showed us how you actually got it out. Thats the only reason anyone watched this. Cant just edit it out =C
@endurancekennels 3 ай бұрын
Pickle fork 👌
@rolandogarcia3597 4 жыл бұрын
Sure take of the damper and f... the rest of the bushings lol
@endurancekennels 4 жыл бұрын
😬
@luthoriousOG 3 жыл бұрын
Soooo many weird questions.
@ThemGnarlyBoys 2 жыл бұрын
5 minute? Not when you can’t get the old ball joint bolt out
@endurancekennels 2 жыл бұрын
Bummer
@m.7n6 3 ай бұрын
5 minute job my ass, I can't even get a two year old rough country steering stabilizer out of a two year old not so rusty drag link
@endurancekennels 3 ай бұрын
I got skillz my friend. Skillz. 😎
@scottwhite2002 11 ай бұрын
Don’t tell us the torque specs or anything
@endurancekennels 11 ай бұрын
Tight 👍
@SilverbackSasquatch19xx 3 жыл бұрын
Way to skip prying the second side out
@endurancekennels 3 жыл бұрын
Kyler did your parents give you that name?
@SilverbackSasquatch19xx 3 жыл бұрын
@@endurancekennels Unsure of how your question pertains to your video but the answer is yes.
Flying Wrenches
Рет қаралды 100 М.
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 4,2 МЛН
Hammerdown Motorsports
Рет қаралды 15 М.
Truck Camper
Рет қаралды 29 М.
Виталий Нефедов | American Auto
Рет қаралды 5 МЛН
jamoloniy
Рет қаралды 510 М.