This channel is like an anime. He started off as the friendly guy who gets close to the protagonist and then turns out to be the villain. Then after being defeated by the protagonist he has a redemption arc and becomes a good guy.

Good video. As a networking (including WiFi) expert, I can say you addressed the essentials pretty effectively, in a way I think most people can use, whether or not they really grasp the underlying issues.

As a technician, I appreciate your advice and understand the value very quickly. I subscribed.

I love how Joe's sponsors are often companies you've never heard about who offer genuinely unique and interesting services.

Some clarification on channel width: on 11ac, the CTS (clear to send) is sent for the primary channel (the selected channel, such as 36 or 149), and then, if clear, also on the adjacent 40 MHz channel. If the other adjacent 40 MHz channel is also unused, then it also sends the CTS on those two also, giving you a total of 80 MHz of use. If any of them are used, then that packet is downsized to 40 or 20 MHz as appropriate. So really, the better thing to do is find the least-used channel, and set it to that. Leaving 80 MHz will only use the extra bandwidth when other users nearby aren't using it. 11ac was designed to play nice with its neighbors. The old advice of avoiding overlapping channels was taken from 2.4 GHz where the used bandwidth spans multiple selectable channels. This isn't the case in 5 GHz, so there's no worry of actual interference. Co-channel interference isn't a big issue unless the spectrum is very congested.

Food & water will be a great thing to stock up on while shortages are going on worldwide. I kind of want to keep seeing ThioJoe creating more & more legit technical videos. He's like a great teacher to his viewers & i wouldn't want to see him go away ever. Love your videos. ❤

I remember you as a 11 year old kid watching your videos in 2015 and GTA 5 memories, the typical gamer of that 2015. Man that days were like good dreams. I miss them soo much.

This is one of the most useful channels on entire KZfaq.

I just discovered your channel today. Really love how you explain things!

2:41 - You can find the IP address of your router by typing "ipconfig" into a cmd window and search for a “gateway”. There should usually be only one gateway, and this gateway is almost certainly the IP address of your router.

Thanks for going into so much detail. The Google and Cloudflare DNS context was SUPER valuable and helped a lot.

@thiojoe Thanks very much for the very informative video. As always, I really appreciate all of your time, effort and money that you put into these videos. They’re very helpful, intuitive, and knowledgeable . My rating is ⭐️⭐️⭐️⭐️⭐️. Thanks again - Keith

I believe I discovered your channel in 2015 but started watching more and more videos in Nov 2018-Jan 2019. Today, I'm going to become a cybersecurity analyst. Always have some easter eggs in your videos! Thanks for introducing me to networking!

This came out just on time! I got my new router yesterday

Thanks for the tips. Just speaking for myself I also use MAC filtering to restrict the devices that may attach my personal network.

Thank you ThioJoe!! I changed my config from 20 to 40mhz. I did a speedtest before and after and the results were: Before - Ping / 20ms / Down speed 15Mbps || After : Ping 11ms / Down speed 98 Mbps !!!!!!! Thank you !!!!! :) :) :)

DFS channels can be used without problems (generally) if you have zero-wait DFS enabled. It just switches channels upon detecting radar and used one spatial stream to detect for radar presence for X amount of time (which can vary based on brand, firmware or even type of access point).

My AX6000 does 160 and I love it for wireless VR. It sits on my desk 2 meters away from my headset so it's amazing

GREAT video! And thank you very much for using a Netgear router.... It made finding things in my menu, SO much easier.

Splitting the bands to allow you to manually choose which band, 2.4GHz or 5GHz, to connect to is another good setting to change.

For a while there, devices without keyboards and screens always wanted you to press the WPS button to get set up. I haven't run into that in years, and I think that temporary WiFi channel many devices use during setup from an app on your phone are in lieu of using the WPS button.

@ThioJoe Thanks for this video as I have been having issues with my Oppo mobile phone 5GHz Wi-Fi speeds being very slow (getting ~60Mbps). After looking at the frequency band chart you provided in this video, I noticed I was using Channel 116 (Doppler radar band). I did a quick check on the Wi-Fi analyzer and found Channel 100 was not being used. Once I set it to Channel 100@80MHz, I did another speed check and the download jumped from 65Mbps to 420Mbps. So thank you again, as I was about to send my phone off to the manufacturer for investigation.

This is one of the most adviceable and usefull channel entire on KZfaq

Glad to see Mine is sponsoring you! I've been using Mine since MrWhoseTheBoss's video but still working on sending data erasure requests

U got a new fanboy ur AWSOME brother thank u for ur work and passion I’m very impressed truly

11:58 Yes, I use WPS. It often makes it much easier to restore lost or interrupted connections. It's only insecure if one lets it be. Setting 7: Not really a setting but something to do, and that is to make sure that when setting the new admin credentials, THAT YOU DON'T FORGET THEM LATER. Been there, and DAMN DOES IT SUCK.

WPS is good to have for some older printers which you can't connect to directly through an ethernet cable. I've used it to help my parents-in-law with their printers.

WPS isn't used a lot in my life, but it comes in real handy for printers! Canon's app drove me crazy so I just went with WPS and called it a day!

Outstanding info - Thanks, Joe!

One of the best channels in this field, detailed explanation + simply understanding the information. But I have a question and I hope you answer me because I really need it, can I block a specific app from the router?

About WPS, there are some printers and other devices without a keyboard that uses WPS (most can be configured by connecting via USB to a computer, but it's usually a pain), but since WPS is used ONLY on the FIRST connection, you can activate the WPS, connect your device, then disable WPS. This way, WPS is only active WHEN you need, not IF you need. It is a little less convenient, but much safer.

I was about to go to bed and watch some Dr. Pimple Popper videos (my lullaby 😅) when this video is one of the selection to watch, I don't usually skip Dr. Sandra but your aura is like a magnet 🤣 I ended up watching the entire video without getting bored although my eyes want to shut down 🤣 Thanks for these informations, really appreciate your effort of specifically explaining everything ❤️

Great video for new people in netowrking and security!

have a 500 mbps connection, bought a new netgear router/modem and ethernet provided great speeds, but wifi went down to 30-50 mbps. Changed the channels off auto, did some of the other steps, and now I'm getting 300-350 mbps - THANK YOU!

Changed DNS to as you advised, and disabled UPnp. Thank you! It feels like magic

Please do make more like this. Thank you Thio

This was very informative. Thanks!

Oh, a bonus tip, from someone who works for an ISP: A lot of newer routers will have a single SSID for 2.4 GHz and 5 GHz wifi, with the router determining which frequency each device connects over. For some IoT devices that have to be synced through an app, you have to be on 2.4 GHz to do so. Some printers can also only connect over 2.4 GHz wifi as well. Some routers like this do let you split the wifi networks, but not all of them... including the ones provided by the company I work for 🙃 If you have such a router, the semi-official workaround that's been passed around the office is just getting further away from the router, but that's not feasible for most IoT devices, so here's another one I found in my spare time: Unplug your router, then set up a Windows or Android device to act as a wifi hotspot (it might be possible to do this on a Mac or iPhone, but idk if those give you the requisite degree of control over settings. There's probably a way to do this on Linux as well). Set the SSID and password to match the one you use for your wifi network. Make sure that the device you're using as a hotspot is broadcasting as 2.4 GHz. Then connect to the hotspot and pair the IoT device. also for the ISP I work for, our two most recent models of router don't even support WPS. The older of the two does have a WPS button, but it literally does nothing. It's a vestigial leftover from the model before that one, which did support WPS. afaik the hardware was re-used between the third-most and second-most recent models - it's just that the second-most recent one uses a different operating system.

I tried that website and it's great! I reclaimed a few. Thanks.

Some good basics 🙂 Advanced: Using CloudFlare's Malware DNS + DNS-over-TLS on pfSense with pfBlockerNG and SNORT. Don't forget subnets, VLAN tagging above 0 and DHCP reservations. Changing the default user and/or removing admin could also be recommended though security through obscurity doesn't work too well if at all. Ensure WPA2 (CCMP/AES) and not multimode. Or WPA3 if possible. Guest WiFi can also be another consideration for things like IoT or something like mDNS and Avahi.

Some routers ports are diff speeds, make sure you have what you need connected to the right Ethernet port jack.

Also remember that the 2.4 ghz band is the exact same as what microwaves use. If you only have a 2.4 ghz Wi-Fi, you can not easily use a microwave at the same time. Microwaves have no care and just blast the micro waves to cook your food. 5ghz avoids that completely

I have had two sets of mesh routers (D-Link and Google). The settings for them are few and far between. You, pretty much, get what they give you.

I've used the WPS button at home, as well as when staying at hotels/motels/airbnb, when the Wi-Fi log-in isn't made readily available to guests. Its a great feature when you need it. You cant use it on an iphone though, but no one in their right mind would have one of those...

Here's a login tip for Telstra routers since i've had to work on a few lately. (Mostly apply's to the Gen3). The password will be the default WiFi password that was on the fridge magnet that came in your box.

Thank you, I learned a lot. I have been trying to add an HP printer to my wifi network without success. Maybe changing the WPS setting will help.

Just had my family's internet set up yesterday and this is probably useful

Great video I finally understand channel bonding

Thanks for this applicable video😊

Wow... Thank you so much for sharing your time, effort, knowledge and everything in between that serves for you to make your videos. I've already watched three trying to get some advanced tips on how to set up my new Asus RT-AX55 router... What a challenge :-( I guess am getting to old for this, not to mention my vision problems. Thanks again and you have got another grateful and satisfied subscriber here. Blessings from the Universe!

Great video. I learned a lot. Will looking at more of your videos.

I have followed this channel when Theo Joe was showing us how to speed up our network,by taping double a batteries to the network cable (measuring I believe it was 6 inch’s back from the end of the cable,with the positive ends both facing out ) it worked on my Hughes net I was shocked .go get em THEO JOE.✌️

Great video - many thanks.

Over a year back I bought a wifi 6 router to upgrade from the default google fiber router, but an upstairs roommate said it was a lot worse than the google one. After upgrading mobo/cpu I had to change to an nvme wifi card(old one was too close to GPU) and have my good pcie one left. I'm tempted to give/loan my old card to him and try using the new router again. Not sure though. Spent a bit over 100 on in so would be nice to use it. The default fiber one is good enough though. "New" one is the TP link AX 4400. Worked the same or slightly better for me, but that roommate did have issues.

Helpful! Thanks for the time stamps for us nerds :)

10yrs ago I used the WPS feature quite a bit while I was adding WiFi cameras to my network. However, as mentioned this a MAJOR security risk to your router nowadays due to SO many hackers out there - definitely DISABLE this! Back in the day MANY WiFi cameras required "Port Forwarding" to be able to view the feeds while not at home (off network). Most cameras today this is not needed and also as mentioned should be turned off! Also, not mentioned is your "password" should be 12 characters or longer! The reason being is 8 character passwords can be easily "cracked" with simple "bot" programs and in some cases within minutes! When you get into 12 or more the combinations become MUCH more making it harder to "crack"! A "hacker" will most likely move on to easier "prey" to "crack". For example my most sensitive connections use 14 characters or more using letters and special characters and upper and lower case letters. It does not take much to do 20-30min of research on Google to "protect" yourself and your devices!

Thanks man!! It was helpful 😃Thanks a lot

that upnp one was a life saver thank you

I recommend that this is best channel for setup of your router

WPS I use for IoT devices like Garage openers also a Sense electrical sensor

I remember that on a Xiaomi MiBox with Android 7 or older, you could actually connect the device to the WiFi network using the WPS function of the router. I remember I did it a couple of years ago, it worked and it was much faster than manually enter the password. Anyway, great content as always. 👏👏👏

Thanks a lot for this video.

Amazing video! I wonder if you have tips on how to set a large house network with multiple access point connection by Ethernet to the main routeur provider! I have set up 3 AP in all the flats and want to set them up as one SSID in my house so they can switch between them automatically as I move around the house! Thank you

Great video for beginners, you should mention quad 9 DNS which vows for privacy protection

Hi thanks for your tips i really need that for my router settings thx😍😍😍.

Great explanation, thx...

I need to learn this by heart

Outstanding - thank you

Joe didn't say this but this is what i've been using for years. If you open cmd and type ipconfig you can see default gateway of all routers your connected to, so you know the exact IP to type in.

ThioJoe - I hate to admit is, but I have used WPS ONCE!!!! A coworker bought a cheap POS printer and spent their entire night trying to get it setup. I would connect to his network wired or wireless (manually configuring it), and he asked me to try. After fighting with it for over an hour (and knowing he had spent the entire night before fussing with it), I said "We have no choice but to try WPS. If that doesn't work, it needs to go back to the store or in the trash; your choice." I turned WPS on in his router settings, and we used the WPS button. The printer connected right away. After that, we turned WPS back off.

thanks for vid after turning off Upnp setting it seemed to fix problem i had where i had decent speeds and ping in speed test but i would have lag spikes where things would freeze then everything happend at once.

This video gets a big thumbs up from me 😁 I didn't know that my xFi router had a default password, but I made sure to change it because it was easily guessable

My router is set to automatically select the channel width (and i noticed it has an option to enable or disable the 160mhz width, which is currently set to disabled) (And for most of the other things, i had already turned them off, as although they are on by default (except for remote management), my router gives advice on what i might want to turn off) Some WiFi enabled printers where i live require use of WPS to set them up, although newer printers tend to get you to connect wirelessly to the printer and pass the WiFi credentials across to the printer that way

If you have a lot of smart home devices connected to your house, along with computers used for business, banking, etc, it might be a smart move to add an old router to your main router to just use to connect your smart home devices, there are a million diff smart home devices you can buy & connect, made by a million diff companies. Most smart home devices only need is able to connect to the internet, so make sure the older router you're using only had internet access to your homes network, no reason a smart home device, or anything connected to the old router should be able to reach the PC you do your banking on. If someone is able to hack your smart device, it would have your wifi password stored on it, might as well make sure it isn't handing your banking data over to a stranger. Yes make sure your old & new routers do not have the same wifi password.

Great video thanks 😊😊

Great content thank you

You're a life saver ThioJoe, God bless you greatly. Peace in Christ! JB 🧑🏻

Great video! Do you have another one explaining the 802.11 wifi mode technologies [a/b/g/n/ac...]? I would like to know which one is the most suitable.

Except for the 1st setting, I learned some valuable settings to change here. The first (changing the admin login) baffles the cable technicians when they come to setup my internet and configure my router. I say, "Umm that's done already thanks! Do you want the guest login to check service then?" And then they leave me alone!! I would like to learn more about how to work around UPnP setting. I want to disable that feature but still know how to manually forward or approve ports to be opened. Also I want to learn about white listing devices and stopping unwanted outbound internet traffic (say to Google or Microsoft telemetry!). Thanks Joe!

I narrowed down the channels on the wifi, also reduce the range & bandwidth %, smartphones don't need alot data to run apps. My brother's & my Xbox is where the priority traffic goes to, port-foward, disable UPnP etc so when you jump on the phone to check something, it doesn't create a lag spike or packet loss if one of us is on.

Yes, agree, do you have a video securing printers?

Thanks TJ!

Oh, one thing about WPS. I have a Japanese printer/scanner that required me to set up router access using the WPS button. Though of course, I disabled it as soon as it was connected.

Theo. ..You Are Great For Sure♥♥♥

Hi. The Upns disabled wouldn’t that effect smart home devices that is Alexa or eWeLink. Thanks for the heads up. 🙏

You're creative keep going✨✨✨✨✨.. Sender: your brother (Baraa) from Palestine 🇵🇸🇺🇲

Finally, Another MINE SPONSOR

Understandable, have a nice day.

Thanks

WPS is useful for quick setup of embedded devices - say, a printer, or some sensor. Basically, anything without an input method. But yeah, it's not too secure.

Thanks a lot!

WPS helped me setup my extender

2:44 - 2:53 or run the ipconfig in windows and it will appear next to the Default Gateway text

Thanks!

If you want to know your routers ip you can just type ipconfig in cmd and run that. Once that has run look for the line that says default gateway, then look at the ip asighned to that and that should be your router ip

Excellent Video. I made a couple of changes!

that thing about the channels is interesting, I occasionally have my 5ghz network drop for a time, especially at my parents home. I wonder if it has to do with the weather bands... something to look at

Not sure how the menu settings on the left changed but was finally able to change my DNS settings. Thanks

This was great! 😊

Thanks for the tip with saymine, boy did why did I have fun I have fun with that.