5 Survival Gadgets On The Next Level #14

Рет қаралды 750,001

4 жыл бұрын

5 Amazing Tools That Are at Another Level 2 - • 5 Amazing Tools That A...
Subscribe to:
2nd channel - / origami768
instagram / crazyrussianhacker
facebook - / crazyrussianhacker
DON'T TRY THIS AT HOME!
Business email: crh.inquire@gmail.com
FAN MAIL:
CRAZY RUSSIAN HACKER
P.O. Box 49
Waynesville, NC 28786

Пікірлер: 596

@KylezGotGame 4 жыл бұрын

I work in a sheet metal fabrication mill and we are required to use cut resistant sleeves because we slide large thin sheets of metal. The sleeves save my arms almost everyday.

@Buchaven959 4 жыл бұрын

Yup, same. Kevlar gloves and sleeves mean I have ten finger still.

@shadwell749 4 жыл бұрын

We just got some new ones at the shop and these new ones are junk.They are super thin unluke the older ones

@ILoveCats208 4 жыл бұрын

Stay safe.

@muhammadazaim6962 4 жыл бұрын

What you mean by almost 😟

@rumplestiltskin1350 4 жыл бұрын

Glazing trade aswell

@daherabdallah3 4 жыл бұрын

"Here goes nothing." *Tries it and cuts his hand off* "Oh well here goes my hand."

@tsudonn 4 жыл бұрын

**puts on a new hand**

@muhammadusmanrafique3517 4 жыл бұрын

Hey what's up guys today I am gonna use some hand replacement gagets

@evilh0mer23 4 жыл бұрын

boom, I just cut my hand off

@camogrrl 4 жыл бұрын

You mean boom! There goes my hand....

@daviddining5192 3 жыл бұрын

BOOM

@janbery 4 жыл бұрын

When he tested cut resistant sleeves, my anxiety went 📈

@D3MONFIEND 4 жыл бұрын

STRONK

@drifterafloat 4 жыл бұрын

We used cut-resistant sleeves like that when working around lots of sheet metal and large panes of glass like in the window shop. Saved a lot of people's arms from getting sliced open. it is also useful in meat processing because there aren't there are knives flailing all over the place in the processing plant.

@PT-mj3bk 4 жыл бұрын

D3MONFIEND STINKS :-( 📉

@darkness_gaming6018 4 жыл бұрын

Yep same.

@Nate-bf7ou 4 жыл бұрын

exactly

@yesithapalihawadane2950 4 жыл бұрын

IDK why but, CrazyRussianHacker and quarantine goes really well together hahaha

@paulpagani182 3 жыл бұрын

I agree with you .

@PerfectBiteHQ 4 жыл бұрын

Uh yeah I probably would have tried those cut resistant sleeves OFF my arm first.

@icusawme2 4 жыл бұрын

That's one of the reasons he's called Crazy! haha

@babybiscuit11 4 жыл бұрын

Hes russian, that knife couldnt cut him anyway, he would just cut the knife, the sleeves arent for him, its to protect the knife.

@PerfectBiteHQ 4 жыл бұрын

babybiscuit11 he is the Russian Chuck Norris!

@michaelalfandary1643 4 жыл бұрын

What do you expect from a guy making KZfaq videos

@harryscity5605 4 жыл бұрын

@@babybiscuit11 5yy67hh

@andersoncrouse7728 4 жыл бұрын

Whenever he couldn't get the gas can to lock in I had flashbacks of the exploding mini camp stove

@death1305sam 4 жыл бұрын

You had togo there thanks for the flashbacks

@jim8432 4 жыл бұрын

Did the same

@drajatdiky 4 жыл бұрын

Which video?

@los_gas 4 жыл бұрын

whats the video called??

@Theserjtankianfan 4 жыл бұрын

Loš Gas I think it was a personal experience.

@zanerodriguez1915 4 жыл бұрын

The sleeves are for ppl who work with metal sheeting and tin rooms and I work in the refinery and insulators use them

@danahamelinproductions9224 4 жыл бұрын

They might also be used in printing and corrugated cardboard manufacturing for paper cut resistance

@felixdelabarara494 4 жыл бұрын

Definitely. Just imagine your arm clipping stacked aluminum sheets as you walk between rows.

@MyGir12 4 жыл бұрын

yea i work in a factory that deals in making car doors and its mandatory we wear the sleeves as its to protect us from any sharp ends of the metals we use

@Tamnd605 4 жыл бұрын

Mom: What are you watching? Me: A Russian guy trying to cut his arms.

@xjallows5388 4 жыл бұрын

Reiner Braun what it say before edited

@Tamnd605 4 жыл бұрын

@@xjallows5388 it said tryying

@xjallows5388 4 жыл бұрын

Bread Emoji alr cool

@kbssaprodussoes 4 жыл бұрын

You can put it on low, or use the rocket engine function

@Quilt69 4 жыл бұрын

cut resistant and cut proof are way different .

@UNaware_of_myself 4 жыл бұрын

Thank you. I was scrolling through the comments hoping someone would say it before I did..

@callsignredacted8290 4 жыл бұрын

Taras: *has razor sharp knife and cut resistant sleeves* Also Taras: *decides to test the sleeves on paper AFTER testing on his arm

@mattkane3462 4 жыл бұрын

Been following you since almost the very beginning. I love watching every one of your videos! Keep up the great work!

@rafaelrostek4003 4 жыл бұрын

Me too I loved his videos back than, but I love that he is still the same

@thegronic 4 жыл бұрын

"if You can light dry grass you can pretty mutch lite anything on fire" Taras Kul 2020

@hjvisagie 4 жыл бұрын

You have to push and twist the gas bottle on te stove, then locks in

@sarahdenkins3431 4 жыл бұрын

Also, it helps you to protect your hands underneath gloves when you working with sheet metal. If you ever worked with ventilation ducts oh, there are super Sharp. So, I hope that answers your question

@jasonschmitz9507 4 жыл бұрын

We wear them at work making cars, especially in the body shop when handling raw sheet metal parts

@nickmacey4480 4 жыл бұрын

My girlfriend used to work in a place where they made glass and she had to use the cut resistant sleeves

@lllz9800 4 жыл бұрын

Your 'imaginary gf' might wanna say

@maximilianpetrov8176 4 жыл бұрын

НЕLLЯАlZΞЯ bruh what

@xEstrangHero 4 жыл бұрын

Left or right?

@emergencynurse02 4 жыл бұрын

Sleeves like that are used by manufactures to prevent injuries on assembly lines or parts manufacture and welding. Car parts stamping, anything that is hot....machinery operations....stuff like that.

@Jay2more 4 жыл бұрын

2:39 that would be the coolest iron man hand arc reactor thing

@ayaanahmedkhan9409 4 жыл бұрын

5:10 taras.exe has stopped working 🤣🤣

@ConradFarley 4 жыл бұрын

“Looks like a big torpeeno” 🤣🤣🤣

@AngryChair74 4 жыл бұрын

Velkum beck to my lavatory we're seeftee is nambuh vun pree-or-itee! (sigh, I miss this)

@wolllf1z 4 жыл бұрын

i was waiting for him to take the sleeves off and blood just start leaking loll

@idkanymore6367 4 жыл бұрын

Me at home: bored because of quarantine Taras at bome: getting ready for zombie apocalypse

@nikolozkurashvili 4 жыл бұрын

@lllz9800 4 жыл бұрын

Actually *"boom"* is

@mrbeast5740 3 жыл бұрын

@@lllz9800 actually "wooaoh it cut agaian" is

@drg3491 4 жыл бұрын

I love survival stuff and i love the survival series keep it up

@bennyeyelash 3 жыл бұрын

We use the sleeves when working in the ceilings, pulling cables and such, lots of sharp edges on cable trays and metal structures and even sharply cut cable ties can easily cut you.

@clodwolf 4 жыл бұрын

Industrial protective sleeves is my go to in a survival situation. Lazy Russian Hacker making a new video from previously put to the test items

@natjonestower3035 4 жыл бұрын

Dude is getting nuts with these re-uploads.

@keegunsantel945 4 жыл бұрын

Motorcycle instructors say "the price of the helmet is the price of your head." That sharps-resist sleeve looks like a poor trade.

@felixsanchezugalde4203 3 жыл бұрын

I‘m really missing „ Security is our one priority “😢

@susancarter1596 4 жыл бұрын

I use the cut resistant arm sleeves while working with sheet metal or building cars. I also use them when climbing trees for trimming.

@jedinightstalkerthefirst4059 4 жыл бұрын

I'm a window Glazier. Which means I work with large pieces of thin glass and mirror. These things with definitely MINIMIZE the effects of sharp glass hitting your arms. I've had stitches 3 times on my arms and once on my leg. I use those sleeves now.

@mattlong9719 4 жыл бұрын

I had to wear those sleeves when I was working with sheet metal. It's very easy to get hundreds of cuts on your arms in a second when you are moving A/C cooling fins off of a stamping press.

@FargoFry 4 жыл бұрын

We wore those sleeves in a factory that produced metal products from giant stamps. They protected against all the the sharp burrs that the freshly stamped parts had.

@josiahpillay1762 4 жыл бұрын

Imagine if that sleeves ended up being one of his fails on his arm🙃

@IceAge20017 4 жыл бұрын

I was holding that lighter in my hand when you were testing it. Its great.

@banjouk8889 4 жыл бұрын

Kevlar sleeves, we use them in BMW's press shop to protect against cuts when handling sharp sheet metal and panels.

@okieadventures8548 3 жыл бұрын

I used to work in a glass factory and we were required to wear similar sleeves

@jefflatham3247 4 жыл бұрын

The butane can does lock in the stove if you turn it, it will lock into place.

@realsteel85 4 жыл бұрын

Do you know what that stove is called?

@jefflatham3247 4 жыл бұрын

@@realsteel85 snow peak.

@jimjones5530 4 жыл бұрын

@@jefflatham3247 thanks!

@sunshineeva7178 4 жыл бұрын

4:18 we should see a whole vid w/ just Taras cutting stuf with the sharp knife like that :P

@Mark-sp4xs 4 жыл бұрын

*starts cutting arms* Me: ok cool *turns are around for split second to cut veins* My emo ex gf: same

@Dakota-je9os 4 жыл бұрын

we use that type of sleeves for handling glass and sharp metals where i work

@sanb3586 4 жыл бұрын

6:44 is that amazed ghost !!!

@jristheb3astgarica973 4 жыл бұрын

Haha

@divineblessing5712 3 жыл бұрын

What seriously 😂😂🤣🤣🤣

@engsh 4 жыл бұрын

Look forward to taste testing with the outdoor cooking gadget.

@6286justin 4 жыл бұрын

Cut resistant sleeves: I work with metal and we use these sleeves every day. When the metal is 12ft long you need two people holding it, one on each end and holding like this can cause the sharp end of the metal to rub against your wrist or arms.

@thealphastrain101 4 жыл бұрын

I know quite a few factories I've worked in made us wear those kevlar protective sleeves. They're quite common here in Canada for the automotive industry.

@richardleach1706 4 жыл бұрын

I wonder if that sleeve thing would help us in the fiber glass industry

@yesac42 4 жыл бұрын

I use Kevlar cut sleeves at my job working in a aero space foundry. They work well and have saved my arms many times over from being sliced open.

@zachhettinger2071 4 жыл бұрын

When I was working in a glass factory we had to use those to protect our arms from large shards of glass

@user-br2cs2yh1p 4 жыл бұрын

The sleeves are used for steel industry we used them at my job we processed coils into usable sheets from thin gauge to heavy gauge keeps yea from getting cut

@shvester3mitshvester 3 жыл бұрын

curious if those cut resistant gloves would be good if gardening (&trimming) around bushes with thorns...like bougainvillea's? Am always getting my arms cut.

@enjoymp3s 4 жыл бұрын

LOL, 4:37 “SAFETY #1 PRIORITY” 🤣

@tylerb1305 4 жыл бұрын

I’m kinda scared to do this

@bhoff82 4 жыл бұрын

Some companies require an employee who uses a box cutter as a regular tool to wear the long cut resistant gloves.

@ExplosivePeeps 4 жыл бұрын

I use these when I work at my job, I work at a bread factory and we have to pull hot pans off the line. You'd be surprised at how easily you get burned. Pair these with heat resistant gloves and you're good to go.

@Drmagmasteve 4 жыл бұрын

His Survival gadgets are gonna help us in Covid 19 pandemic

@jabidhasan906 4 жыл бұрын

Am I the only one thinking that stove as arc reactor from iron man xdd

@bugmanmatt9492 4 жыл бұрын

Glass production makes good use of the sleeves.

@prescurmudgeon6374 4 жыл бұрын

Going over the instructions would be awwesoome.

@MILFDestroyer69 4 жыл бұрын

Had them gloves in a place I worked cutting open boxes with a knife, somehow ended up cutting my arm and needing around 15 stitches 😂

@mistery00t29 4 жыл бұрын

You already did review of this collapsible thing

@jimjones5530 4 жыл бұрын

What is it called?

@linkadrip 4 жыл бұрын

your going to have to start a museum with crazy gadgets and stuff someday. ha

@billd3agl350 4 жыл бұрын

the cut resistant sleeves would be good for construction work like sheet metal rebar or flashing, as well as on a slaughter line perhaps.

@michaelzimmerman8959 4 жыл бұрын

Those arms socks looks like they'd be good in a sword fight

@glennmiller8775 4 жыл бұрын

We use those sleeves and body shop when we build cars cuz of the sheet because of the metal is sharp edge

@drifterafloat 4 жыл бұрын

They do make chainmail sleeves which are even stronger and would hold up to you slicing on a piece of wood like you did and also fairly stab-resistant. Because it's chain mail

@thelugash 4 жыл бұрын

Roll up in the club, wearing nothing but welding pants and cut resistant sleeves

@kroyweb4140 4 жыл бұрын

My blood pressure went up when he test the sleeves!

@darthchop697 4 жыл бұрын

*When he put the sleeves to the test.

@The_Baker_Social 4 жыл бұрын

Cut sleeves are used in factories. Great Dane trailers, window factories etc anywhere that has workers working with sharp material

@xIIxNeMeSiSxIIx 4 жыл бұрын

I work in a mirror fabrication factory and the cut resistant sleeves are very usefull to manipulate glass without any risk of being cut.

@uberXserial 4 жыл бұрын

The cut resistant sleeves are what we had to wear at this sheet metal cutting facility I worked at so we wouldn't slice our arms with giant sheets of stainless and aluminum.

@camsloan02 4 жыл бұрын

I have seen that cut resistance material in a few other videos and they always get through, although they always have a hard surface on the other side. I wonder if they would preform better with a soft surface behind them like flesh.

@jadedheli996 4 жыл бұрын

I used to wear cut resistant gloves when I worked at a metal plant bc the metal sheets are sharp so you have to wear cut resistant material to protect your arms and hands.

@rocky3075 3 жыл бұрын

I work in construction and I've been required to wear cut resistant sleeves and gloves whenever working with glass, sheet metal or tying rebar because of the potential of a wire poke.

@daryushnadjafi6673 4 жыл бұрын

Cut resistant sleeves may be good for cornfields or something Maybe also for Palm Fields and bamboo

@brandonakins5753 4 жыл бұрын

We used the Cut proof sleeves when I worked in a steel mill where we handled sharp metal all day so we wouldn’t cut arms

@IrvinIce 3 жыл бұрын

"Very very sharp knife, here goes nothing." *Proceeds to knife wrist*

@lesliecouch1985 4 жыл бұрын

sleeves would be good for gardening, especially around rose bushes

@tbsmith-ht6ej 3 жыл бұрын

The cut resistant sleeves are for having knife fights in the hood. C'Mon man!

@maxxfargo4282 4 жыл бұрын

Disposable Aluminum is cheaper than paying that dishwasher at the banquet center to wash pans

@haziq_zm 3 жыл бұрын

He put a little too much trust in those sleeves

@CashIsKing_UseItOrLoseIt 4 жыл бұрын

The best use for the cut resistant sleeves I think would definitely be for butchers. P.s. ALL are great gadgiks in this video. Tq Taras, really Kul. 😎

@azcookie3112 4 жыл бұрын

Love your videos

@Wastedwu 4 жыл бұрын

I've had to wear sleeves like that in metal stamping plants. Sheet metal can be sharp.

@i.m.a.r.s6279 3 жыл бұрын

I used to use of cut-resistant sleeves when I work with large panes of glass

@HeadCannonPrime 4 жыл бұрын

you mean 5 gadgets I already reviewed and stuck into a compilation video.

@SandyToesDetecting 4 жыл бұрын

Great burner the first one, like that

@randelldarky3920 3 жыл бұрын

The sleaves may be good for Saturday night knife fights.

@shinigami1315 4 жыл бұрын

I used to wear cut proof sleeves when I worked at a razor factory. You can imagine why.

@codypeters1505 4 жыл бұрын

Those sleeves would be great for clearing blackberry bushes

@KaldraJayd 4 жыл бұрын

I wonder if that's a safety feature to detatch the fuel source on that first stove

@kenwhite5132 4 жыл бұрын

Oooh and I believe if the Russian hacker would have read the DIRECTIONS may have just accidentally told how to lock in the can.... love you videos crazy Russian hacker..... u the man bro......

@The_Jom 4 жыл бұрын

I work in behavioral therapy, we use the sleeves to protect our arms from bites

@jandellko 4 жыл бұрын

Jonathan Boucher wow

@rocky_25 4 жыл бұрын

Hope everything is going well

@KrakkenXXX 4 жыл бұрын

🤤🤤🤤🤤🤤

@gretag.2752 3 жыл бұрын

I like those collapsible fire pits or grils as usually they are so bulky and heavy

@AndrewMartinez1776Redux 4 жыл бұрын

You're lucky those cut resistant gauntlets worked when you were wearing it, or else this video would be called; "a gadget that sent me to the hospital."