Any issues off-roading ?

how can I find 6 lugs adapter for my 5 Lugs ...I have a 2018 Ram 1500 want to put the TRX wheel on it is a 6 Lugs I guess 6.5

can these be used to convert 4 lug to 5 lug for 1990 mustang ?

Hi I just have a question the axle from the 2000 Silverado can fit on the Chevy 97 2 converted into 6 lugs I asking in somebody say the axle from the 4 x 4 truck it's a bigger 2 inches thank you

thats why im here. looking at 6 lug rims :D

How did they work out for you? I'm trying to go down from 6 to 5.

I got a 16 ram ,Been thinking about that, GM wheels everywhere

+monster1176 yes

I have a 5 hole lug rim the tires I have on my truck now are 30/10.50x 15 5 hole lug

No, you would need adapters usadapters.com/products/6x5-5-to-6x135-6x139-7-to-6x135-wheel-adapters-1-25-usa-spacers-14x1-5-78mm-1

Are the wheels 6x5.5? Do you want them hubcentric for the wheel or just standard 2 pc adapters?

+The Al Hashemi I do not have them on the site yet but they are available. 423-704-0407

Yes

ricflores50 I have a 1996 F150 4wd with 15 inch rims with 5 lugs, I wanna go with a 6 lug n 16 inch or bigger rim. How do I make it a 6 lug?

Luis Reyes you have to cut off the rest,like this adapters are 1.1/4" thick you have to cut your studs to 1.1/8" long or so,

Sorry for the delay, lots of changes happening, you need to make sure you have clearance for the thickness of the adapters without the wheels sticking out too far, if yes, which six lug pattern do the wheels have?

Would be great to here back from you in knowing what size allen head wrench to use. I looked at almost all of your videos to find what size should be used but was un successful. I stripped a black bolt.. stripping was my human error. Just need to know for next time and where and how to get a new bolt. I have some 6 lug toyota rims to install on a 5x4.5 jeep, Thanks.

I believe they are an 8mm. I can’t get them freaking loose. They are in so tight from the manufacturer

How did you get them off finally?

65 to 70 ft lbs is good

sorry that is an incorrect link see usadapters.com/products/5x127-to-6x139-7-5x5-to-6x5-5-wheel-adapters-14x1-5-stud-2-in-thick-x-3

Diego Gonzalez Razo I have 5 lug universal 24" rims and tries and I need 6 lug rims same pro they still for sale if u want see them

Daymin Benoit sure send me a pic threw email babyjayden22411@gmail.com

may be a challenge, we can build the adapters but you need 1.75" clearance for the thickness of a two piece adapter.

WheelAdapterSpacers what about a 6 lug piece from 5th generation Toyota 4Runner? Any thoughts on that? Either a 1.75” piece has to make It fit correct?

Both bolt patterns are the same but you do need a spacer to bring the Dodge wheel out over the center bore of the Ford because the Ford Center hub is larger

5x6 is very odd how thick do you want?

well, there is no such thing as a universal wheel, if you have a wheel that has two bolt patterns you will need to identify which bolt patterns they are because there's a lot of different possibilities. then it would take a two piece adapter to go from 6x135 to one of the bolt patterns on your wheel. This would also involve changing the lug nuts on your vehicle and trimming the studs down to just under 1.25 inches. You also need to make sure you have enough clearance for the overall 2 inch thickness of the adapter.

2 PC adapters are $300 for 4

+suthi krishna What is your vehicle?

yes

They are available, what is the bolt pattern of the wheel

+harold hicks $229 for four delivered in the US

+WheelAdapterSpacers How much would 5 4.5 to 6 5.5 run for?

+Premium Photog raphy

+Francisco P Yes 423-704-0407

what is your year make and model vehicle? and wheel bolt pattern?

they are safe if properly installed, if you don't put them on right they will come off.

hola, dime con toda honestidad..es seguro esto? que probabilidades hay que rompan?