5 Tools Every Motorcyclist NEEDS! (And How To USE Them)

Рет қаралды 68,385

Күн бұрын

If you like what you saw and want to support the channel, click that subscribe and bell button. If you'd like to help out even more, you can check out / spitescorner
So you're getting started working on your bike and don't want to mess it up? That's smart. Then you should probably grab some of these...
Affiliate Links:
Torque Wrench: imp.i104546.net/75GKQg
Rear Stand: imp.i104546.net/DKbaJ2
Tire Plug Kit: imp.i104546.net/rQzWBv
Save Some Cash and Support The Channel
CARDO (10% off with code SPITE10): bit.ly/3IUZ1hM
FLYING EYES (10% off with code SC10): flyingeyesoptics.com/?ref=spi...
Ever wonder what gear I use? Find it here:
STREET GEAR
JACKET - S&S Savage 2.0 - imp.i104546.net/y2eVNW
GLOVES - REV'IT! Metric: imp.i104546.net/LXnMgV
BOOTS - Alpinestars SMX 6 V2: imp.i104546.net/JzJMRe
DIRT GEAR
HELMET - Bell MX9 ADV MIPS: imp.i104546.net/m5zPr7
ARMOR - Fox Racing Titan: imp.i104546.net/NkzMeq
GLOVES - REV'IT! Metric: imp.i104546.net/LXnMgV
BOOTS - Alpinestars Tech3: imp.i104546.net/eKqLJ1
Want to get in touch or get more info about the channel? direct.me/spitescorner
00:00 - Intro
01:39 - Rear Stands
03:52 - Tire Plug Kit
06:20 - Torque Wrench
09:20 - Dremel, Tap, and Die
11:18 - Multimeter
12:57 - Honorable Mentions

Пікірлер: 326

@spitescorner Жыл бұрын

What's another tool you think is essential for the home mechanic?

@simonkennedy6116 Жыл бұрын

I'd say a decent air compressor for blowing up your own tyres (I answered before I saw the whole video)

@CarlosGuzman-tv2tx Жыл бұрын

A manual impact driver helps a lot to not to damage the head of the screws when you cant loosen those and is a cheap tool

@Yougotrats Жыл бұрын

air conditioning for your garage lol

@MrMunky1985 Жыл бұрын

Pro tip....those sleeves on your multimeter tips slip off to have full length tips instead of little nubs. 😅

@antonioavrami4788 Жыл бұрын

Your mum ! 😉

@fullmetalcorgi1350 Жыл бұрын

My wife says I'm the only tool she ever needs.

@shadowdancer2131 Жыл бұрын

😂

@marcusvalentin5485 Жыл бұрын

Lie

@LogicalQ Жыл бұрын

That’s a keeper

@fullmetalcorgi1350 Жыл бұрын

@@LogicalQ things to say when the Victoria's Secret employee is taking your wife's measurements

@chriszeis5477 Жыл бұрын

My wife tells me I have every tool made,but I still find more I need

@thorstenmetalhead9666 Жыл бұрын

This is the content Yammie would never have let published under his channel, but you shine on. Keep it up your good work!

@Felix_A_ Жыл бұрын

Note on the multimeter, those probes should be a bit longer. The little cone shaped pieces on the end help to protect you from shorting out the positive on a frame or something else grounded. The little cone shaped things should just pull off without too much fuss.

@liquidrepublic Жыл бұрын

I came here to say the same. The tips on mine are just like his.

@John_Ridley Жыл бұрын

Yeah those are just there for CAT rating. They should pop right off.

@N269 Жыл бұрын

I find those guards quite good. Having a long exposed probes can lead to unexpected fireworks - especially when in the hands of an individual who epitomizes the expression "a little learning is a dangerous thing". Frankly, bike maintenance (any maintenance), as a whole, should be done by someone who has a firm grip on the subject, not an "education" (especially a KZfaq "education")

@ou7shined972 Жыл бұрын

yup

@liquidrepublic Жыл бұрын

@@N269 They definitely have their place, but it's nice to be able to remove them when needed as well. Learning to perform basic maintenance isn't an awful idea. It can give you a better idea of how your bike operates and makes it easier for you to identify when you do actually have a problem.

@carver7689 Жыл бұрын

I saw those Pittsburgh labels. Next time you walk into a Hazard Fraught store, Spite, get a pedestal fan. You won't want to use it while you're recording, but it will feel like angels' kisses while working in the garage in that summer heat.

@motodiablo Жыл бұрын

3:33 the man saw an opportunity, the man took it. Well done, sir! 😂

@thebrowns5337 3 ай бұрын

and the opportunity was... your mom

@markymarknj 9 ай бұрын

I have two, quick thoughts. One, you can also use a beam type torque wrench. They're less expensive than clicker types; they don't need to be calibrated; and they're good enough. Two, one thing that comes in handy is those little headlights you can wear on your head; it sits on your forehead, and lights up wherever you're looking. It's INDISPENSIBLE!

@sanxi34 Жыл бұрын

Something that has made my work on motorcycles SOOOO much better is a small battery-powered lamp, one of those that have multiple levels of lighting and a magnetic base with a hook. They are great for when you are running a bit lower in light, for then you need to sneak it through to see something in a dar corner, and they are super versatile =D

@KimmoJaskari Жыл бұрын

Also, a head-mounted LED light. Always puts the light where your eyes are. Absolutely great when wrenching, even though my garage has LED lights and is plenty bright you still get those dark nooks and crannies - a LED head lamp is perfect for that.

@rednelli Жыл бұрын

Hint: Remove the plastic caps from the probes. Hint two: Wrap a thin wire around the end of the probe and leave part of it straight as an extension of the probe. You can then insert it into small spaces. Super film. Useful for many amateurs.

@carlosdj81 Жыл бұрын

12:36 in case anyone is wondering

@punchbuggyyellow7097 Жыл бұрын

Other than a set of tyre spoons & a patch kit for anyone with spoked wheels running tube tyres, a chain breaker & riveting kit is an essential in my toolbox. It's also nice to have a shop stool on wheels, especially if it has a tool tray onboard.

@jasonmeador124 Жыл бұрын

Great one, Spite. Quick, conscise, knowledge drop. One other 'on the bike' emergency tool is a $20 bill stored in your under-the-seat tool kit.

@johnpflug1567 Жыл бұрын

Two twenties and a ten is much better these days. Inflation! Back in the good old days, the1960s, my Uncle Doug used to keep a $20 bill inside the folded registration of his Corvette; the State Troopers on the Jersey Turnpike were very appreciative!

@dasko3 Жыл бұрын

Enjoyable video Spite! Was anyone else hoping that they would see Whitney dressed up as 10mm goblin in the attic?

@paulforrest3182 Жыл бұрын

A manual impact driver that you strike with a hammer and the mechanism turns the screw. A set of JIS driver bits or screwdrivers. These are for Japanese bikes that have screws that ARE NOT Philips head, but look like them. A soldering iron Heat shrink tubing. A hot air gun. And a compressor

@user-hf7jp2lt5x Жыл бұрын

One of the best tools is a cup of tea or coffee. If stuff isn’t working out, just have a cuppa and it forces you to take the time to think. Great show.

@firefighter1c57 Жыл бұрын

#1 a service manual for your particular bike.

@gregt995 10 ай бұрын

For anyone uncertain about the tire patch, I've used one on one of my work truck tires which inflates to a max of 80psi and has a load rating of around 3000lbs and it has held up so far for nearly a year. That's with me very frequently hauling gravel, concrete, lumber, etc. and maxing out my payload on a semi-regular basis. I would have absolutely no qualms about using one of these on a motorcycle tire

@chucknv5482 Жыл бұрын

As an electrician, I cringed every time he lifted his multimeter by the leads 😂. That’s so wild to see. I’d get smacked for it at work. You have a nicked lead testing 480+V and it contacts a surface, good luck and it was nice knowing you.

@michalbezdek543 Жыл бұрын

I like how Spite is getting greasier and greasier as he goes throu the tools.

@scheppusmaximusgaming Жыл бұрын

i thought no one else noticed haha

@Ichibuns Жыл бұрын

Between the inside of my truck bed and its outer panels, I have a hard mounted air compressor. I also keep some tire plugs in the cab. Between taking the bicycles out, getting a flat tire, hauling the motorcycle places, etc. It will come in handy at some point and I'll be glad I have it. If it's miraculously not me, someone I run across would be very thankful. Even if the tire is "unrepairable," the repair will last long enough to avoid a tow.

@modularcuriosity Жыл бұрын

I love seeing the subscriber count already past 100k. Good Job Spite.

@John_Ridley Жыл бұрын

When I started working on motorcycles, I decided it was worth it to splurge on a digital torque wrench.

@DomGaskell Жыл бұрын

When I bought my first big bike, I bought a trickle charger in place of the tender. Also after having it not start on a couple of occasions I bought a jumper and adaper that permanently connects to the battery, so when it next needs a jump start, it's a case of hooking the jumper in rather than unloading just to get under the seat. All about making a painful situation less painful! Side note: my first bike was a CB125F, complete with the Honda reliability so I never needed any of this. It also had a centre stand, something I'm not blessed with now. Damn I was spoiled by that little thing...

@wardroland270 Жыл бұрын

Thanks Spite. Great job. Good info. God bless. Happy trails.

@Brian-jz1pi Жыл бұрын

Good video makes me think of what may happen on the road.And any maintenance I've been putting off.

@ClockDev Жыл бұрын

Having a fan in the shop to work with some fresh air is also pretty handy ;-)

@haneymoto Жыл бұрын

I always have random blocks of 2x4s or 4x4s around. They are handy under a wheel when you're taking it off. Or as a wheel chock need be. A large screwdriver or bar can be handy when putting axles back in to get things lined up.

@chrisv8997 Жыл бұрын

Hey! This was a very helpful video. Thank you.

@Mr_Scoobie_ Жыл бұрын

Tip. When using the tire repair kit put some rubber cement on it then light it on fire. It helps expand the rope plug and keeps from air escaping.

@awpgaming7505 Жыл бұрын

imagine taking all your 10mm out for a video to realize then to forget where you put them lol that would suck. The mom joke had a good laugh haha. By far one of your best videos with great comedy sir!

@davidlovelady163 Жыл бұрын

You had me with the 10mm search This is one of the best videos I’ve seen in awhile 👍👍

@1991sealed Жыл бұрын

The zip ties! Literally today needed one when my buddies license plate bolt fell out somewhere on the road and we didn't have one. Soon as I got home I stuffed a few in my bag

@nataliestennett5230 Жыл бұрын

Excellent tips.

@izcho 7 ай бұрын

I wish I saw this video before I stripped a bolt and also over torqued an engine cover bolt! Learned the hard way but this for sure helped me understand what really went wrong!! Thanks for all the awesome and useful info

@kaladincrayolablessed2166 Жыл бұрын

Loving the content

@ThreeStreets42 Жыл бұрын

Two weeks ago, I bought 3 new 10mm sockets, one for each of my tool kits. Legit no idea where the originals went. My tap and die set has saved my ass on more than one occasion!

@DiddleDangle Жыл бұрын

The your mom joke got me so good. Also this has to be one of the most useful / concise vids I've seen on this stuff. I'm a newbie so it's nice to know what the minimum set of tools looks like.

@NobodyWhatsoever Жыл бұрын

Hey, Spite, I worked with electronics for a few years, and always used the equipment already in the workshop until I eventually bought my own multimeter. It came with similar ends on the leads, and I found out there were cone sleeves on the ends of the leads. It won't be so helpful for those short ones, but even aftermarket leads (which can cost much less than a whole new meter, so instead of just replacing the whole thing, why not just the leads?) sometimes come with the plastic cones on their leads. Good video, and thank you. Great advice!

@user-ot1dv6ri4f Жыл бұрын

this is really comprehensive!

@joetheagent Жыл бұрын

Good tips. I was lucky and inherited a set of metric sockets that had extra 10, 11, and 12mm sockets in it already... I guess they must have encountered this problem too. Hang in there with the ridiculously unforgiving heat. Hydrate and chill if you can.

@LiveToLoop Жыл бұрын

Just noticed you have a garage now! Nice!

@BMWBAS Жыл бұрын

Great video, the 10mm skit was perfect. 😂

@michaelfrancis-vb7tp Жыл бұрын

Great work

@johnpflug1567 Жыл бұрын

Got them all!

@jktho Жыл бұрын

That was a good video spite.

@Ntmoffi Жыл бұрын

This is why harbor freight sells that 10mm socket set. 😂

@mattstur5748 Жыл бұрын

This was a really fun video

@tjey379 Жыл бұрын

Thanks you do have great maintenance tips, some of these suggestions I will look for and some are not even in my country but I have about 20% ,😄down already.👍👍👍

@chesterpophamproductions2879 Жыл бұрын

I love my auto sensing multimeter. Not like the old military days where we had to be careful and not blow the meter!

@michaelconran5252 Жыл бұрын

Since wife and I lay down the miles. We carry a NOCO battery jumper. Also a small air pump with light that plugs into the pigtail. This is a Harley branded one, but the price was on par with other brands. The NOCO is on the expensive side. For my Harley M8 I got the adapter, so I don't have to spend 30 tearing the bike apart to get to the battery. I just plug into the jumper pigtail. If you ride all day or multiple days. Carry the basic tools you will most likely need on your bike. It is usually something small and stupid that will ruin your day. Touring Florida, had the brake perch bolt back out some. Pulled over #27 Torx and on my way.

@BelfastBiker 2 ай бұрын

Wonderful list - I'm new to biking - got the zipties, dremel, multimeter, and the battery tender at home, and in the backpack, the plug kit battery powered inflator, and the jump pack. Need to look at bike lift kits or rear stand, torque wrenches and tap and die kit. Cheers.!!!

@CJ21461 Жыл бұрын

Dude the Texas heatwave is brutal you're soaked. So glad I'm not back home it's pretty nice riding weather in Socal right now. Stay safe and drink water.

@LeonardbroNocaprio420 Жыл бұрын

Most multi meters (including the cheapy that you just showed us) do have longer points, there is a sleeve around them, as there is a sleeve around the probes of yours too in the video. Go out there grab a needle nose and pull gently on the outside cover that's covering up that probe, you'll see that it pops off, leaving you about an inch of probe. When you are done you can snap these covers back on... I felt like a dumbass the first time I realized this as a 40 year old man about 7 years ago. Good content though, thanks for that!

11 ай бұрын

Very good, partner. Thank you..!! Regards from Brazil.

@elindenstein Жыл бұрын

I went through the Helicoil mess on an oil change on my Bandit 1200 back in 2013 and I've never been that mad at myself, not before and not since.

@paulgarritty8978 Жыл бұрын

Great video just remember to apply the rubber cement glue when inserting the tyre plugs 👍

@adamtovar9833 Жыл бұрын

This is super helpful

@theprodigalstranger5259 Жыл бұрын

Though its a bit harder to find I prefer Mouse Milk over PB Blaster. Best multi-meter I ever had was the Fluke 9090, only one I'd recommend. Honorable mention would be a good multi-tool like a leatherman!

@SunyJim Жыл бұрын

Totally agree with torque wrenches, also picked up the 1/4 and 3/8 so far. Haven't got a 1/2 inch yet, but also don't have anything that big to torque Too true about the tire patch kit, has to be one of the most common reasons to be stuck at the side of the road on a bike

@davidmcfaull3162 11 ай бұрын

For over 50 years on bikes with no center stand, Ive jacked up the bike on the right hand side and held the bike up with the kick stand.

@paulsmecker2439 Жыл бұрын

I have found one of the digital torque adapters is just as good as a whole bunch of different torque wrenchs and a quite affordable. Zipper ties always save the day!!

@1683clifton Жыл бұрын

One stupid thing I keep in my bag is an oldschool lensatic compass. Phone dead? No map? Just remember how interstates work and break out old magnetic direction finder.

@John_Ridley Жыл бұрын

Add: * Stainless steel zip ties are nice to carry around for securing hot stuff. * The $10 set of bolt extractors at Harbor Freight have saved me a few times.

@blandrooker6541 Жыл бұрын

Good tip about pit stands, but a front stand is nice to have as well. But, I ended up selling both my front and rear PitBull stands and getting an Abba SkyLift, about 775 bucks including shipping from the UK. Also, a Rabaconda street tire changer works wonders. Granted, those are some expensive tools, but worth it in my garage and according to my 61 year old back. Also, European style tire repair screws are SO much faster and easier than rope plugs, and I always have a battery powered air pump in my road kit.

@tomgibson5769 8 ай бұрын

Thanks!

@phatsmitty Жыл бұрын

Spite, your garage is not a mess - it looks very organized compared to mine. My garage looks like a yard sale. Like someone picked it up, shook it upside down, then put it back on the slab. My shiny new Tenere and my garage sound system are the crown jewels...

@petersymons7817 Жыл бұрын

Thank you

@diptenkrom Жыл бұрын

if you are doing this work in a shop or garage, you could hang hooks in the cieilg or rafters to use straps or ropes to hold a bike up as well.

@hvymax Жыл бұрын

Center stand was the first addition to my KLR.

@crjlife_9082 Жыл бұрын

I can’t stress enough a tire patch kit with co2 canisters. Has saved my ass twice already this past year.

@jeffferguson899 Жыл бұрын

for a better penetrating oil than pb blaster just mix 50/50 ATF and acetone. also I find an impact driver a great addition to the tool chest. especially if you have a vintage bike

@WVRider304 Жыл бұрын

Yes to the impact driver!!

@biccys Жыл бұрын

I would like to add, a selection of fuses to fit your bike. There's always a small cubby to store extra ones under the seat somewhere.

@zacharybeetham7318 Жыл бұрын

Spite you can remove those little covers on the probes they are longer than you think. Also with plugging, the reamer needs to be jammed in and out a few times to expand the hole enough to get the plug in easier, also always coat the plug in rubber cement beforehand it helps seal and lubes on the way in as a bonus. Also twist the plug tool about 45 degrees before pulling out puts a loop in he plug inside the tire ad helps you from pulling the plug back into whe you remove the tool. Cool video dude enjoy your content .

@Hopefulfodder Жыл бұрын

I needed a 10 mm socket and was using my bosses tool kit of scattered bits in ziplock bags in his tool box. He had 6! It was like seeing a rare treasure

@itsturbotime2994 Жыл бұрын

Other honorable mentions, though not tools, loctite and anti seize...

@wesleyedwards2764 Жыл бұрын

I keep mine in the tool box just like a 10 mm socket (well maybe not like the 10 mm) and allen wrenches. I think they could count as a "tool." A healthy dose of dielectric grease should probably go on ignition contacts that may be prone to exposure to moisture. My RF900R would not run in the rain the last time I got caught in a shower.

@mattcrain6893 Жыл бұрын

Proper spanner for adjusting preload on shocks can be very handy to have.

@JWest1 11 ай бұрын

as a diesel tech years ago, I used to use torque wrenches that would pull up to about 600lbft of torque, 855 Cummins head bolts torque at 400 foot pounds if I remember correctly.

@toddwebb7521 Жыл бұрын

My experience with bacon strips mostly on car tires is that if you catch it while it's low but not actually like rim sitting on the deflated tire on the ground flat they will wear all the way to the end of tread life without blowing out , but if you are like rim on the deflated tire flat it will blow out before getting to the end of the tread life, go ahead and replace it before that happens

@kokobeatz7222 Жыл бұрын

4:22 common myth is you shouldn’t plug your motorcycle tire. But I can confirm the manual says it’s okay and even gives you a rated top speed. And it will be faster than you think.

@neonsamurai1348 Жыл бұрын

I live in a condo, unfortunately I don't really have the space for half of that stuff :) (and trickle charging is a real pain as no electrical sockets in the garage, so I have to take the battery out each and EVERY time).

@danielgallegos971 Жыл бұрын

Your mom joke caught me off guard. I had to reply back 10 seconds to see if I heard correctly 😂

@postersm7141 Жыл бұрын

9:20 “ unfucking fucked threads” I can’t believe that close captioning actually got part of this right! I am impressed!!!

@bendutro4787 Жыл бұрын

Humble suggestion that what you should have demonstrated was thread chasing as opposed to cutting new ones. Chasing with taps/dies quickly leads to undercutting and thread pullout. Great content, ride on!

@tonyjourneyman1944 Жыл бұрын

I have extra double ring end 10/11mm and 12/13mm ring spanners for exactly the problem you mentioned at the start. These are not top shelf brand spanners, but still not crap ones either. The fork leg clamps on my bike are behind the headlight and impossible to get at with a torque wrench, what I'd really like is a torque "spanner" if such a thing existed.

@daltonj507 Жыл бұрын

😂 ..."secret of life, holy grail, no 10mm" cracked me up

@micpen22 Жыл бұрын

If you strip out an allen wrench, you can tap in a starbit of the same size and stripped out.

@tomoates8568 Жыл бұрын

I've had to cut a slit into a bolt with a rotary tool to get it out once lol. Fun times

@ezpoppy55 Жыл бұрын

My biggest takeaway: I’m not the only one who can not find that goddamned 10mm socket/wrench/tool when I need it! (And I enjoyed the Monty Python reference, too.) Great info and advice!

@user-jw8iv5mv9q Жыл бұрын

Lol

@hvymax Жыл бұрын

KLR threads are all cut in Zamac. I ripped the footpegs out of the frame and crushed the rear subframe sticking a landing across a log. I hate when Righty Tighty turns into Righty Loosey!!!

@tjmac1453 Жыл бұрын

LOL!! The never ending quest to find the 10mm.

@lukefish7562 Жыл бұрын

3:33 HEY! 🤬 And it’s my moms birthday today! 🤣 Tell her I said hello! 😆

@johnmitchell9705 Жыл бұрын

Just backing off on the tension on the torque wrench is enough. If the threads on a bolt are messed up replace the bolt with a new one if you can. You can use a helicoil to fix damaged threads.

@geoffhurley8103 Жыл бұрын

When you run the rasp tool through the nail hole, feel around and follow the hole as the nail probably went through at an angle. If you just shove it through, you'll make a second hole and worst case the tire will delaminate at speed. And always store the torque wrench set to zero.

@jacobgibson9814 Жыл бұрын

Kroil works really well for tough bolts

@borilapostolov7474 Жыл бұрын

Hey Spite, thanks for making your hands dirty. It was really helpful!

@John_Ridley Жыл бұрын

Harbor Freight has a $15 set of every kind of 10mm socket. I think they might have done it just for the LOLs

@KimmoJaskari Жыл бұрын

I like the Stop & Go mushroom plugs. I like the idea of having a mushroom head inside the tire pushing against the hole, seems very secure. The installation tool is also way easier to use than cramming rubber into a tiny hole. Stop n Go is just better than this generic plugging strip thing - in my opinion. I do have a full kit in my bike toolkit.

@motoryzen Жыл бұрын

I've seen for myself time and time again AND Ryan F9 from Fortnite has proven also that your regular dime a dozen sticky plugs are better and last longer

@elickes 11 ай бұрын

That quick "your mom" had me rolling!

@RideWithRen Жыл бұрын

Screw Grip is an excellent tool to have around if you're trying to remove old screws thar are worn out. In the absence of Screw Grip you can use laundry powder, fine sand, dirt, etc, but it's not as effective.