5 Ways To Connect Network IP Camera With POE Power Supply

Рет қаралды 956,141

Күн бұрын

How to connect IP Camera using Poe - Power Over Ethernet.
🙏 SUBSCRIBE ▶ / @securitytechadvice1981
FOLLOW US ON:
👉 Pinterest:
/ quickoverview
👉 Google+:
plus.google.com/+QuickOvervie...
Track: Raven & Kreyn - So Happy [NCS Official Video]
Music provided by NoCopyrightSounds.
Watch: • Raven & Kreyn - So Hap...
Free Download / Stream: ncs.io/SoHappyYO

Пікірлер: 137

@manuelitocarazas7959 4 жыл бұрын

Excelente video gracias por la información. Saludos 👍🇵🇪

5 жыл бұрын

Çok iyi Kamera Bağlantıları ile ilgili daha iyisi yok

@rosianeafrodite4546 5 жыл бұрын

very useful video. may I connect 2 ip cams coming from a poe switch port to nvr lan network interface and more 2 ip cams in NVR Network Interfaces with PoE Function?

@michaelmayfield4304 4 жыл бұрын

Mix and match won't hurt a thing. You're only trying to get 48vdc to the cameras to power them.

@RajkamalBhardwaj 5 жыл бұрын

Informatic video and maximum wire length power supply only Poe to IP camera.

@michaelmayfield4304 4 жыл бұрын

100 meters is the maximum length of the cat5/5e

@AzharKhan-sn9vf 3 жыл бұрын

100m

@RajkamalBhardwaj 3 жыл бұрын

@@AzharKhan-sn9vf thanks

@RajkamalBhardwaj 3 жыл бұрын

@@michaelmayfield4304 thanks

@YellowPurple 6 жыл бұрын

*it's really helpful video*

@alighawbar1343 3 жыл бұрын

amazing thank u very much

@desmauliimelda5955 5 жыл бұрын

THANKS

@Tralficage_tgc Жыл бұрын

Excellent video and I take this opportunity to ask the following: I have a PoE NVR and 2 IP cameras, one of them with PoE support, for which I use connection #3. The other camera does not support PoE. Is it possible to use connection #5 to activate it? Thank you.

@patododman8416 4 жыл бұрын

Gracias

@agodokossi5431 4 жыл бұрын

Good job

@uphill248 4 жыл бұрын

Hello, can cat5 or cat6 give power to an ip camera? I don’t want to purchase a Poe

@aditiatrinugroho1225 4 жыл бұрын

2 the best applications that..

@nonoyshowtv5958 3 жыл бұрын

Nice...very interesting...

@smokey281 2 жыл бұрын

Thank you

@ed_itecobuildin8098 4 жыл бұрын

Hii,very nice video. How extende Ip camera with NVR POE more than 100 meters and three screems connected as HDMI 2.0 which at 100 meters to NVR HDMI port?

@Tralficage_tgc Жыл бұрын

I have an additional question: If the Camera does not require PoE 12 Volt and the NVR supplies 40 volts in its ports, is there any risk of failure in the camera when using the splitter?

@doruwyl 3 жыл бұрын

Can we power any IP camera using a PoE switch? (the ones that are having ethernet port for data transfer) I want to avoid having 2 cables for each camera. I want the data transfer and power to run on the ethernet cable.

@MrAldoLuys Жыл бұрын

Obrigado ☺️

@miguelapaza5267 2 жыл бұрын

Lo máximo 👍👍👍👍👍

@FPSBELGIUM 5 жыл бұрын

Hello, if we have audio PoE camera, and we put an HDMI cable, do we have audio via the HDMI cable?

@GhostvaperYT 4 жыл бұрын

ethernet cable you mean? depends if the camera does audio or not. some of mine do and some don't. then you need a cam that can take an external microphone if not

@bablabiswas6317 3 жыл бұрын

nice projection. Jai Hind

@kavitharajeswari2990 4 жыл бұрын

cannot display the 3g option in hik vision....how can use this option

@sidmichael1158 4 жыл бұрын

Can i tap the power to our electric cable?

@zeouattara6073 4 жыл бұрын

Super

@zataayama7842 5 жыл бұрын

thanks mate, this video really help me..

@PlayJewel 6 жыл бұрын

How to connect multiple cameras with method 4? If i have 2 switches, with 4 cameras each. Do i connect it to a 8ch nvr or 4ch nvr is enough?

@ImranKhan-lu5ev 5 жыл бұрын

If you are going to connect 8 cameras then you should have 8Ch NVR.

@michaelmayfield4304 4 жыл бұрын

You would use a minimum of 8 channel NVR or a computer running nvr software like Milestone, iSpy, or Avigilon that allows multiple cameras.

@mns-hc9oy 6 жыл бұрын

Please put links to buy online

@naveenjoseph9727 5 жыл бұрын

informative

@suyadikomisah9458 4 жыл бұрын

@FullmoonEffects89 3 жыл бұрын

Im clueless but whats the purpose of all the other ones when you can do #3?

@bensaidismail5394 3 жыл бұрын

Can connect it directly with WiFi router via poe splitter

@brainjingo7491 3 жыл бұрын

Hit vid

@lloydiedesu5131 4 жыл бұрын

which is better 48v direct poe ip camers or ip camera with separate 12v does power vary in performance??

@michaelmayfield4304 4 жыл бұрын

direct connection to the PoE switch - as long as it's powerful enough for the number of cameras. The switches usually supply about 12 watts per connections with an average max of about 70 watts for all connections (for example, the ZyXel GS1900-8hp) if you go above the max watt rating for the switch the cameras will pop off and on.

@Houndog545 5 жыл бұрын

Hello i need to do what you did in step 1. What's that box called that you connected an ethernet cable to from the camera with which then connects to the nvr

@michaelmayfield4304 4 жыл бұрын

a switch

@24nikita 3 жыл бұрын

@@michaelmayfield4304 Yes but what kind of switch, there are a multitude of variations of switches on the market. Start with POE or non POE that will give you something to think about.

@sabodololon4504 3 жыл бұрын

thank

@cctvandnetworkingtechnical 6 жыл бұрын

nice

@amitor1234 3 жыл бұрын

Hi. My nvr has one Lan port. How do I connect it to the poe switch and seven cameras to the poe switch? My poe is netgear unmanaged 8 ports.

@CSanchez1990 3 жыл бұрын

amit amit connect the cameras to the network switch on PoE ports and connect the nvr to the network switch as well.

@mohamedalshoubaki3754 5 жыл бұрын

Thanks

@itizme8072 4 жыл бұрын

The only answer I could think of for the following question I have, is to give the camera an IP address, But otherwise, WHY do you need a switch or router? Can't you just connect ONE camera to the Ethernet port of a PC you want to use as a NVR/DVR, by changing the addresses in internet options/ LAN properties ? And if so. HOW? Or is it absolutely necessary to have a switch ?

@chucksteward2615 4 жыл бұрын

@IT IZME He wasn't doing any of that to show you or me how to do anything, It was just to get his required time for payment from KZfaq. If he cared about what he was doing he would have explained everything he was doing.

@surajfreedish9777 3 жыл бұрын

Nice

@willwade1101 4 жыл бұрын

If it's PoE then why do you need a power supply? I would think that that meant the DVR supplied the power to the cameras through the Ethernet cords.

@RockyJayyy 4 жыл бұрын

Yeah I was thinking the same thing.

@busybusiness9121 3 жыл бұрын

What?

@TheRealAnthony_real 5 жыл бұрын

Most switches are 24v POE and some cameras are 12v POE ... Would you damage the camera ? In my case I want to use a Synology as a NVR ...hence I just want a switch for powering the cameras ..

@colmanboylan9514 5 жыл бұрын

Yes you would damage the camera here. Only 24 volt POEs are used on intercoms hikvision. Never for a camera have I seen one here

@michaelmayfield4304 4 жыл бұрын

This information is erroneous. PoE power is between 37 and 57 volts DC with the VAST MAJORITY supplying 48vdc at about 12 watts per connections. Old Analog cameras run at 12 or 24 volts. A few specialty devices such as Ubiquiti M5 Nanostations use 24vdc which is supplied by their own power supplies (if you connect them to a normal PoE switch they won't power up)

@mrabbasi9403 3 жыл бұрын

@@michaelmayfield4304 is it mandatory to attach DC 12V/3A Power adapter to ptz ip 4MP cameras or no need...? As in my network NVR is connected to poe switches and poe switches connected to cameras so I'm lil buffeled whether to set preset/tour PTZ without DC adapter

@michaelmayfield4304 3 жыл бұрын

@@mrabbasi9403 - this really depends on the camera specifications. It's manual should state if an external power supply is needed. Most PTZ cameras have a power "brick" that supplies the additional power needed. They have to 'P'an / 'T'ilt / 'Z'oom and that usually takes more that the 48vdc @ 12 watts (it can go higher) that are usually supplied. Maximum current is usually 350 to 600mA .

@mrabbasi9403 3 жыл бұрын

@@michaelmayfield4304 can i have yours email ID or whatsapp number will talk u in detail regarding this matter since I'm new in this field so needed lil assistance

@dskkumar8084 4 жыл бұрын

2, Poe Injector Output 12V-2 A ????

@sharmaarke6283 3 жыл бұрын

Good

@ebberjr3924 3 жыл бұрын

Commentary would have been a tremendous help.

@mazharnoon8225 4 жыл бұрын

Hi guyz if am using dvr 108g f1 how can I connect it online with my phone

@mohdazeem5895 3 жыл бұрын

With app sir

@aarerajanbhai 2 жыл бұрын

We can use internet of that ?

@DarkZenonia 5 жыл бұрын

The 3. Is correct the other what the heek nice teach lol

@dr.mohammadi4803 2 жыл бұрын

does it matter to use class A or class B ?

@Localandmobileseo 5 жыл бұрын

Not sure about this? You dont need mains power if its POE?

@michaelmayfield4304 4 жыл бұрын

Not to the cameras. The 48vdc can be supplied to the cameras from the PoE switch. It comes across the blue and brown pairs.

@mrabbasi9403 3 жыл бұрын

@zulfiqaruddin7959 5 жыл бұрын

sir mera built camer ka view naie arah hai

@vladislav7867 Жыл бұрын

Спасибо дядя спас на защите

@paulnicholls331 5 жыл бұрын

The music is driving me nuts so distractimg

@taibadouhan8749 5 жыл бұрын

@samdeane6683 5 жыл бұрын

ikr

@AstroTomK 4 жыл бұрын

Must of got that music off pawnhub

@Fester_ 4 жыл бұрын

I'm high as f... so it sounded great ! Back to work in 10 minutes.

@vishalvishwakarma6117 4 жыл бұрын

apne bataya nvr with poe but apne tu dvr ko direct ip camera se kyu connect kiya explain

@mnageh-bo1mm 5 жыл бұрын

does this work with hikivison ?

@msdigital912 4 жыл бұрын

This all method has work all types of ip cameras and nvr

@lemondubs 3 жыл бұрын

Dumba$$.....it is hikvision being used.

@erickbulyota9474 4 жыл бұрын

What if a have more than 200 meter distance per each camera?

@durgaprasadcctvtechnical1905 4 жыл бұрын

Add separate power adapter in camera , nd will automatically come

@dibrentley7915 5 жыл бұрын

still no wiser for my problem :(

@Alex-ip6nd 5 жыл бұрын

What was the last one?)

@michaelmayfield4304 4 жыл бұрын

The last one is basically the same as the PoE injector. Power comes from a power supply to the splitter. Video goes out the Non-PoE cat5

@yasintechno1044 4 жыл бұрын

That is at least OK.

@FaridRudiansyah 4 жыл бұрын

#2 wrongly connected. Active Poe out to cctv that suport poe in, or use active poe splitter for unsupported cam/device. If passive poe injector, use passive splitter too. Active means auto voltage and amp (standard at/af). Passive is an hack, make sure the voltage and amp is match.

@sankarnatarajan4997 3 жыл бұрын

I want fixing 65 camara how to install

@Technical_support781 4 жыл бұрын

@mickcarson8504 4 жыл бұрын

PoE is not needed for Ethernet cable distance under 60 meters. Additional power provided by a transformer is only used if the cameras are more than 60 meters from both a NVR or DVR recorders, e.g. large properties, farm house, dairies sheds, where expensive material, pumps, compressors, solar panels, stainless pipes and fittings can be stolen, horse stables, factories, etc.

@bouncingsoul777 4 жыл бұрын

Excellent! Thank you. I have been reading through many stupid comments trying to find an answer to what you just explained. I don't have a power source at any point where I want to mount the cameras, but none of them will be over 60 meters away from the DVR. After reading your comment, it sounds like I shouldn't have a problem. Thanks again.

@TopChannel4831 2 жыл бұрын

song name pls

@Nattapong266 5 жыл бұрын

I dont really understand about the no.5 how benefit to use poe spliter compare to poe switch no4.... can you help explain? To me i ,ve the no4 ....

@lamar07103 5 жыл бұрын

You also have to account for voltage drop

@icur 4 жыл бұрын

Run 2 cameras with one line if it has enough power?

@bounktp5233 3 жыл бұрын

how to do it

@jimmyfan1227 5 жыл бұрын

I see UTEPO PoE Switch in this video, am i right here?

@jimmyfan1227 5 жыл бұрын

More UTEPO PoE Switch, www.utepo.com

@michaelmayfield4304 4 жыл бұрын

UTEPO is just a brand name, there are many. HP, ZyXel, TrendNet, etc.

@shedymanvideos4138 2 жыл бұрын

Hi, for example, if we have 4 cameras, how do we power the 4 of them? With 4 adaptors? Is there a central system for the four of them?

@Zoeee_Lau 2 жыл бұрын

Use a 4 ports PoE injector to power your cameras.

@andisubiakto9106 4 жыл бұрын

Poe switch

@joemarz2264 3 жыл бұрын

You connected the PoE injector backwards. It should be IN to the switch and OUT to the camera.

@HD2You 10 ай бұрын

also I don't understand why at option 5 he is using the POE splitter at the camera and not using the cable directly to the camera?

@mudslinger888 5 жыл бұрын

Could you find yet more annoying noises?

@user-gu8og1yd9m 5 жыл бұрын

pls name of music

@stefanhv7968 5 жыл бұрын

"So happy" Raven&kreyn

@amitupadhyay4032 5 жыл бұрын

Direct poe switch le bahi faltu me itni wire failane se kya fayada

@HaiLsKuNkY 6 жыл бұрын

You forget powerlines/home plugs

@ed_itecobuildin8098 4 жыл бұрын

who can resolve these problematicals solutions?? kia kia kia. Have good day and enjoy yourself for thinking.

@ericb6390 4 жыл бұрын

If you have to hook power supply AND ethernet then its not poe, poe is power over ethernet

@mamdouhsaloum367 4 жыл бұрын

بدنا طريقة البرمجة

@joelrggizmo1373 4 жыл бұрын

No disrespect but this video does not tell me anything. When I hear music I pass on to the next video that explains what they're doing and why they're doing it that way.