5 WAYS to use a Laser Cutter with Leather

5 WAYS to use a Laser Cutter with Leather - xTool D1 Pro 20W Review

Рет қаралды 31,337

Жыл бұрын

XTOOL Laser Cutter
D1 Pro: www.xtool.com/products/portab...
D1 Pro Kit: www.xtool.com/products/produc...
Purchase on Amazon
D1: amzn.to/3TO4hFM
Official Site: amzn.to/3UNXwoI
I do get commission on every sale that goes to help support our channel!
Our Leathercraft Shop: www.springbokcraftco.etsy.com
LEATHERCRAFT GEAR:
Hole Punches: amzn.to/2SSGieV
Corner Punches: amzn.to/3blMRwI
BUDGET Custom Brass Stamps: s.click.aliexpress.com/e/_AnPkE7
BUDGET Acrylic Dies for Clicker Press: s.click.aliexpress.com/e/_9J5Bv5
Slot Punches: amzn.to/3uDJiZC
Oblong Punches:amzn.to/3ySZidA
Pricking Irons: WUTA Leather - s.click.aliexpress.com/e/_AOPdux
Budget Irons: Tandy Leather’s Irons or Seiwa.
Edge Bevelers: amzn.to/3S12Gwl
Strap Cutter: amzn.to/3ydpboi
Mallet: Barry King Mallet (Rocky Mountain Leather Supply)
Hot Stamping Machine: amzn.to/2RSBQfm
Gold Foil: amzn.to/33EE6th
Cutting Mat: amzn.to/3obURpm
Cutting Board (For hammering): amzn.to/33HZA8I
1 Ton Arbor Press: Princess Auto
4 Ton Clicker Press: amzn.to/3oh3XkQ
Refillable Dye Markers: amzn.to/3QDWc4U
Burnishing Agent Tokonole: amzn.to/3tLitSS
Best Scissors Ever: amzn.to/3ffEcwT
WHERE I GET MY LEATHER
Hand and Sew Leather
OA Leather Supply
Tandy Leather
Acadia Leather
Maverick Leather
Jim Newman Leathers
As an Amazon Associate I earn from qualifying purchases at no additional cost to you. It helps keep our channel going!
Music:
Music from Uppbeat (free for Creators!):
uppbeat.io/t/andrey-rossi/sei... code: QWNL5MXVO85MOLVM
Music from Uppbeat (free for Creators!):uppbeat.io/t/roo-walker/boltL... code: N15AN33BXEFYBTWM
Music from Uppbeat (free for Creators!):uppbeat.io/t/paul-yudin/big-a... code: 9YEJTEQ3GFMKSVRJ

Пікірлер: 40

@knitsewfancy Жыл бұрын

"something, something, science...you can't do it" LOL Love it. I have the D1 with the 20w module. I love it and got some great ideas for leather from you. Thanks!

@SpringbokCraftCo Жыл бұрын

haha! thanks for watching!

@jeanninecannito3632 Жыл бұрын

I LOVE your tutorials! You get right to it. I have to fast forward thru most other tutorials.

@ihavekalashnikovyoudomath9275 3 ай бұрын

At my job we have a CO2 laser, and my boss lets us use any scrap we have for personal projects. So any downtime we have we're allowed to use the laser. What I do is that I laser cut acrylic and make stamps. I made my own logo/maker mark in ½in, 1in, and 2in sizes. I'll wet the leather all the way through, place my stamp, and clamp it down AS HARD as I can. It makes a nice and deep impression, especially as the leather gets thicker. I've managed to crack only the 2in stamp, but the ½in and 1in are fine still.

@andreathompson-bg4hl 7 ай бұрын

Ah something something science. Thanks for the clarification.

@jkrjhn8 Жыл бұрын

Great video!

@darknessfierce4209 4 ай бұрын

FYI, on why won't cut clear acrylic Clear acrylic will not be cut with a blue laser because the light will pass through the material and not be absorbed. This requires an appropriate laser, such as a CO2 laser cutter. A CO2 laser cutter emits a laser beam in the infrared range, which can be absorbed by acrylic of any color.

@pambenziger7220 Ай бұрын

Even though I knew this, and I appreciate you giving the real answer to anyone who might want it, I really liked her "something, something science" answer. My brain really wanted to give her a big high-five for this and I'm now a subscriber.

@edwardolivares5038 Жыл бұрын

Just bought mine 🙏🙏🙏

@andreatthatsme Жыл бұрын

I don't have a laser tool. I'm on the fence only because I have so many things I like to do already... embroidery, rhinestone, doll clothes, etc. This is one I have to give up. However, I you want to make stuff like molds and wood projects, I would buy from you as long as the prices are affordable. Thank you for always sharing.

@SpringbokCraftCo Жыл бұрын

Yeah for sure! So many hobbies and not enough money or time. Thanks so much for watching!

@darknessfierce4209 4 ай бұрын

great video

@MorganScott82 7 ай бұрын

Old video, hope you see this. Curious about results with different kinds of leather, this all seems to be vegetable tanned. Curious about oil tan, latigo and bridle leather, and while I have my own d1 and could test I'd love to benefit from your knowledge if you have any.

@joshalters3940 Жыл бұрын

Nice video, have you tried to cut the suede fabric yet?

@RealDustyChandler Жыл бұрын

Can anyone reccomend some good masking for 3-4oz leather to reduce some of the soot on leather patches? Also, could masking be a fire hazard?? THANK YOU!

@ericdekeersmaeker5780 24 күн бұрын

I don’t really get why so many people try to cut in one pass. Go faster with more passes (time is the same) and the cut will be a lot cleaner. With leather ánd wood. But nice review. Thanks

@marialinkhart5235 3 ай бұрын

How do you remove the burnt ash that covers everything

@bigsubful 6 ай бұрын

Did you refer to mm per seconds, I suppose. Is it right?

@jamesshelton9126 Жыл бұрын

I have engraved tumblers and glass also metal business cards.

@SpringbokCraftCo Жыл бұрын

such a versatile machine!

@Lillian.M. Жыл бұрын

Great video. Can you also make a video on the Glowforge CO2 40W laser that you have, and all it can do. Thank you

@SpringbokCraftCo Жыл бұрын

I'll definitely do one in the new year. Thanks for the comment!

@Lillian.M. Жыл бұрын

@@SpringbokCraftCo Great, of course when you have time, I know its no easy task making these videos and time consuming. Thank you looking forward to it !

@ramonhidalgo8377 Жыл бұрын

Would you recommend this for engraving and cutting patches for caps?

@SpringbokCraftCo Жыл бұрын

i think it's prob the best bang for buck laser right now for that. definitely get the air assist with it.

@Stryker2 Жыл бұрын

I’m curious if you could mark the clear acrylic with masking tape and cut out the template? Have you tried that yet?

@SpringbokCraftCo Жыл бұрын

I haven't tried it, but I've read on a few forums it doesn't work well. Thanks for watching!

@petadang Жыл бұрын

What settings did you use for the leather cutting on lightburn?

@SpringbokCraftCo Жыл бұрын

I haven't used the xTool with lightburn yet. But these are the settings for xTool's software: kzfaq.info/get/bejne/jdNyY6ajrKnZYGQ.html

@cwjones227 Жыл бұрын

I have a question: How do you get the burnt smell out of your wearable laser cut leather products? I cut out earrings and they smell like tri-tip. I am testing my bad passes I made with my xTool D1 Pro 20w with distilled vinegar... Help!

@SpringbokCraftCo Жыл бұрын

I find sprinkling baking soda on it helps and letting it sit in it a bit and then washing it off. But yeah, the smell is not great.

@ryangillis3208 Жыл бұрын

Share the file you used for the tool holder?

@Hoops-Senior 7 ай бұрын

Don't understand why you didn't cut the rubber stamp out while on the laser after rastering..

@jppalm3944 8 ай бұрын

Xtool support great for youtubers. Days and weeks if you're not

@dbc4133 Жыл бұрын

Thanks for sharing. Your video was helpful. However, I'm confused about materials that should be avoided with the Diode laser, d1 pro. Not because of your video, but I see so many people engraving/ cutting leather and acrylics when I thought these were highly toxic materials to cut and should be avoided. I've watched several videos and many are cutting materials which the D1 Pro manual states we should never cut. I find it really troubling with XTool because they specifically list materials We Should Not Cut due to Toxicity, but at same time they are SELLING/SUGGESTING acrylics and Leather to D1 Pro/ Diode laser owners. The information is so conflicting...No one seems to care or they are unaware of the Chlorine gas and other toxins they are exposing their lungs and they work space to. Is there something I'm missing? I'm also concerned about some woods and MDF. Is there a website that offers information about safe laser engraving materials? But More importantly types of materials we should avoid?

@SpringbokCraftCo Жыл бұрын

Definitely. I'm not an expert on this subject at all. But from what I've researched, I personally would only laser cut vegetable tanned leathers (which doesn't have Chromium in it). The thing you're avoiding when laser cutting chrome tanned is Chromium VI. Typically this was used more in the past and their are strict regulations in place to minimize chromium VI. Chromium III is more common now (and in general, people believe this is safe to laser, but there are others who would just avoid it to be safe) The issue is if you don't know where the leather comes from and can't guarantee that it doesn't have Chromium VI, many countries have less strict regulations and lack of quality control. If you know where you're getting your leather from, you can ask them what their tanning/dyeing formula is. This is a good start for what is not safe: www.troteclaser.com/en-ca/learn-support/faqs/unsuitable-materials-laser-processing

@Atom_Alchemist Ай бұрын

can someone please translate the whole speed 11 to actuall mm/s or mm/min?

@pinball16 5 ай бұрын

$1000 seems like a lot since an ender Falcón 2 is half that price.

@jacobthayer236 Жыл бұрын

Haha, you're awesome!

@NickyVEE89 Жыл бұрын

Been trying to return mine for the last week, and xtool has ghosted me. I spent around 2800 bucks for everything. And they wont even respond. Guess I didn't do my research.