50 inches of doom 😆

When I was young my friend Johnny had a box that took up a entire wall in his room with a bunch of 6x9’s and 4 12”s it was insanely huge sounded awesome whole house shook.

That’s the same design I’m using in my vehicle. I have a 15 inch Sundown subwoofer in a small enclosure but with a 80 inch long tube curved inside it which is tuned down to 16hz approximately. It’s the best way to get very low tuning without having to resort on a huge enclosure.

I always enjoyed every bit of your video. There is something going on rather than the main video itself like the editing of the wall w/c was an extra addition of entertainment for me. :D greetings and best regards to you and pancake! :)

I learn a lot from your "silly" videos. Thank You very much.

i hear... *someting long!?!?!?!* maybe... *i knew that* you did nothing i said!

Dude great vid! I’ll definitely be doing this !

your custom box was the one in the right... by the way, love ur videos mate. U are THE BOSS

Love ur vids

Transmission line and tapped horn enclosures are among my favorite in ported types.

the beat sounds good

Well done

ive just put a 2 way set of small bookshelf speakers i made on my parcel shelf and in the boot i got a lanzar 15 inch sub and a 15 inch passive radiator and it sounds great

could you do a video explaining the basics of how boxes play into sound quality and why ported boxes are known for being louder etc...

That wall got me

That beat 👌🏾💨💨💨💨💨 nice video bro

Left box is ported for sure

ported boxes tend to have less excursive movement than sealed boxes in my experience. Much different sound too, but that's the point. I've had sealed single and dual 12" boxes outperform vented boxes before, so there's a time and place for everything. Very interesting to see how a 50" port works!!

can you add different tuning ports into the same box?

Quite a silly video! I love it!

Older Rockford fosgate speakers back in the mid 90’s had the T/S parameters listed and using term-pro at the time I’m pretty sure the specs for a killer ported 6 x 9 box (sounded close to entry level 10’s for sound characteristics) was 2.25 cubic feet with a port that was 3” x 3” x 3” long cubed. Huge box, but it impressed an incredible amount of people. To be honest about 1 cubic foot sealed per 6 x 9 actually sounded quite pleasant as well.

Left hand gesture game on point. lol

I have a newer truck with 10" excelon (KFC‑XW1000F) in a box that's about .45 sq ft in each compartment. I drive them with a 2000w kenwood (KAC-9106D). What steps should I take to tune them to an existing bose system? I tapped into the rear door speakers via a LC2 (AudioControl LC2i).

Man, I love youtube because of these kind of videos, it answers quesion that come to your mind, thank you for making this video. Any chance you can upload that sample of FL studio? I have no clue abut that app and I would like to check it.

Okay I don't care what anybody says seeing that speaker move like that is cool can you do more videos showing that

Years ago I knew someone that had alpine subs that were 6x9 was in an old MK2 cavalier Sri.

I built a couple of sub boxes tuned to 24hz, and is it normal that virtually bo air comes out of the port when it’s playing at 40-60hz??

Vibe audio for the win :D

That little tune is stuck in my head wtf

Lol I have a set up in my pickup truck (lorrie?) which is a single cab. I had an old system from my car I was hoping so salvage but alas couldn’t fit two tens kicker comps behind the seats without losing my center console (much rather remove that and put in a bigger sub that takes more power in a sealed box) so instead I got 2 6” bass tubes and called it a day. With this tubes I found a thing I’d been missing my whole life, which was the fabled and missed MID BASS that is overlooked most of the time. So me being the reasonable person I was decided to set amplifier low pass to 80 rather than 120 (got tired of hearing mid bass take over my listening experience) and even had to use ye old fashioned equalizer to drop the 60-200 hz to a bearable listening experience. So now I finally have the pure bass subs I want with subtle mid bass thrown in there (lpf mainly work for high frequencies ig) so now lesson learned. Don’t go for 6” subs unless you’re using a pro set up like Justin prices work truck (6 6” subs sundown audios with a custom ported box and lots of power)

Two....... This is actually a nice program, if I tell it, nobody has done such of an in depth analysis on by 9s......very interesting. I'm enjoying this. 4 of my cars has by 9s in them and I've always tried to get the most from them. Like you said 100hz and up are easy..... The trick is to get lower end in the "free air" style most car manufacturers design them. I can think of a few rides that had stock systems that got lows but not very loud, I'm aware that this is studio environment talk and test but automotive wise, loosely I try different methods to enhance the low end performance without compromising space.. Sometimes I wanna ride without subs but get a bit more than the "thump" they give.. Lol, I could go on and on..... I done.

You need 1m more subs

All the other kids with the pumped up kickss

defo better with the long port in.

#bestKZfaqeeerrrrrrrrrrrrrr

the best

i know that they might be fine from 30hz to 45hz because if you think about it they have the ruber surround vs most pro audio midbass speaker have a cloth surround im not sure you know what i mean. now the rason i would stik above the 55 or 60 hz on this 6x9 they migh be going all the way up to 3.5khz and thats a lot of movement to make and at the same time trying to make a 30hz tone migh not handle much power and sound good

what would happen with that port and a passive radiator on the back ?

The right box is ported because it moves more because more air can get to it

I like the home protection system beside the door there a baseball bat and a hammer.👍

damn that not weird at all ,that sound dope you should make a song out of it

i have 6x9s in a horn loaded enclosure, and they sound much deeper

Id go with left the more movement

Left. Its hitting its resonate frequency causing it to (fight) the air being pushed through the port.

Please make a bigger box! I've just bought these boxes, been very underwhelmed with the performance, is like to see what the best size is really

It's that closer to a transmission line? There's probably more volume in the lort than the enclosure lol

Folded horn enclosure please. Great vids. The type of enclosure that I’m recommending will really do what you want with the bass with a smaller footprint

The right one

Toyoto twin cam's loved 6x9

I want that song !

The right 1 was ported. Cause it moves a lot more freely than the other 1

Right one

Nice video But i dont understand How you get the 6x9 to move so mucht

Maybe put a 180 degree bend in the port?

Does that driver have Qts parameter suitable for a bass reflex setup?

As a youngster I put a by 9 (6x9) in a 12" old school "fisher audio" house cabinet enclosure and it produced the same amount of bass as the 12" if not more.... This was way before any knowledge of what audio stuff, just playin around.....

Sweeet video

How about making a proper ported enclosure?

my subwoofer takes it as with the 50 port it makes the bass so much crisper

7 comments you know when your early when you see that

50 inch port, what is it tuned to, 3hz? cool video

How's about a larger box but slot ported for even more efficiency

Slot ported .6 cuft enclosures shouldn't take up much space. I think my Paradigm's are pretty close to that size and they get down to 40hz.

I bet the volume was advertised as both boxes combined lol

6x9 speakers basicly need the same port size and lenght as a decent 8inch subwoofer has, because most 6x9 are free air speakers and cant perform wel on lower hz in small cabinets and non or tiny ports they need alot room to breathe. (yeah i tested alot of speakers in the past mostly car and hifi speakers in different cabinets port tunings and offcourse cleanest of all no ports, but high power usage.) Try this for fun if you want, 6x9 in a prefab sealed/or ported box for a 10inch subwoofer by cutting out a board from mdf and place it infront of the 10inch hole from the subwoofer cabinet, cutout the hole for the 6x9 on the mdf board and you are done (i did this sort of thing alot) if you choose a sealed one you can add your own ports

Right box

try a box with 15 liter and a 60mm port long about 15 cm :D

I had a friend that had 4 free air 6x9 subs in a Camaro so they faced up towards the glass and they slammed for 1992 at least I remember it that way

Right I think

PVC with PVC with conectors

Love the subtle call outs to the commenters that think they know better than you. Subscribed.

btw i need that test track so badly lol

Song name at the end?😅 it's so cool😁

The left box is ported

Left is Ported. The port reduces the excursion around the tuning. Under the tuning it should anyways move alot. The long port with the low tuning will ensure a massive excursion peak between 40-60hz

of course I enjoyed you wrecking people who know absolutely no idea what there talking about

Wich software is that?

Ur test track feels like Daft Punk - Instant Crush

get a single 6x9 get your SMD subwoofer box and make a spacer to fit the 6x9 in it. see how that sounds.

right box obvs ported ll

My car has two 6×9s on the rear window sill (& an air vent like the front dash) which sound like they may be using the whole boot as a speaker box.

I had 2 Sony explods in huge ported box doing 32hz easy

by the way dude i like your voice :D

Is the box really waving in real or not, I think not

Should just make the 6x9 boxes taller and port inside the box. Would still fit on your stands then

Vibe BlackAir 6x9's get low! Try them.

If I were to put a bigger bassport, can that improve the bass?

I dont know what that guy was talking abouti had a 20 year old 6x9 that came out of my first car. When i was waiting for my new sub to come in i put the 6x9 in a box meant for a 8 inch sub and it performed wonderfully. It was over powered of course but it did sound good playing notes below 30 Hertz.

Use the bass track as a tune and make a song. (post on SoundCloud)

Uh physics tell me that the speaker that doesn’t move is ported

1:06 OwO

right side lol

The right side is has the port

Do a torture test

Passive radiator maybe ......

Where are u from ? and where Its youre cat

Right

tuned to like 5 hz

you may want place a flared port inside to reduce the farting sound.

Iv always loved ported speaker boxes! Passive ones just don't cut it for me