Thanks to Keeps for sponsoring this video & for the free product! Head to keeps.com/cruciblecoachworks to get a special offer. Individual results may vary.

What a timing; my gf just broke up with me. This series and especially you guys make me so happy. This made my day a lot better even with the given circumstances. Thank you guys and love from Belgium and from me.❤❤❤

The straight line sheet metal cutter you were using was invented be Al Swink. He also invented the car wash after WW2 using B-17 supercharger motors to blow the cars dry. He went on to become the Mayor of Santa Monica, Ca.

Graphics department working overtime on those primo fan shroud diagrams! 👌🏻👌🏻

Ohhh, you’re early today. What a trickster you are.

You're right, that fender really does impact the look a lot, it's looking more and more glorious with each panel you fabricate. I know it's still early to talk finish but, I really can't wait to see it all painted and shined, it's gonna be incredible!

Love this series. Regarding the fan shroud... any thoughts to adding a round flange to capture the edge of the fan blades? That will create a draw path from the radiator core and increase the efficiency of the fan and the ridgity of the shroud. Cheers.

For the shroud, this is a system that should get a lot of ram air, so I'd include check gates in the fan shroud so air can get out through it. NAPP makes one for Miatas, you can look at that for reference. It's quite simple, it just takes some rectangular holes and oversized rubber flaps. Much like oil pan baffles with one-way gates.

I never cease to be amazed by the insane levels of skills you both have! I’d happily sit and watch a 2 hour video

I am absolutely loving this build! Sending support from Brisbane Australia 🇦🇺

Lovely work chaps. VERY VERY much enjoy the detail and the banter.

The metal work was the perfect inspiration to get started on my projects today! Thank you for the video.

I love watching this puzzle come together. Well done boys, keep it up!

Thanks for another great video

I'm always bummed when it ends and I have to wait an entire week to see it again... But its great! Doing the lords work indeed!!

Another great video 👍

It looks so good withouit a fender flare. Just like a 60's car.

I've watched a lot of custom car shop videos and your skills and craftsmanship leave most of them in the dust. Great work! Subscribed.

TJ Hunt needs you to help fix the RH rear quarter of his 997 GT3

I know it takes time to work on a side project. But I’m so stoked to see that fender take shape. I hope it’s very close to the rendering. Learned something too, when wheeling realized I’ve experienced shape bleed and had zero clue what was going on. Now I’ll watch for that. Thanks fellas.

Neat work, guys! Regarding the joint between the side and top of the fender, along the wire framework--I suggest making that radius as large as possible so that it doesn't even read as a corner. Rather, like one big continuous curve.

No shit, I'm excited about every new video in this series! Doing a project like this someday is a dream for me and I love watching you guys make it happen! Btw. the engines backstory got my girlfriend crying haha that's about as much of a heart a car can have :)

Love this build greetings from Sweden.

Not likely functional given the huge gap but having a ring around that fan would look tough and add some character. It's steel it'll be easy to weld ;)

Always Great work. Love the Ducting and shrouding

That fender gap looks perfect. This build and the metal skills are really something to look forward to with every episode.

It's coming along great I can't wait to see the finished job. 🎉

Another Banger, and to put some personal anecdotes with Keeps, I can say that even after I had to stop my year of a subscription for financial reasons, I haven't lost much more hair, even 3 years after I last used it and I'm 40.

Thx for the metrics

Ryan definitely puts the fun in dysfunctionality.

Loving this, well done chaps!

If something bothers me on the car channels. It's when you start a project and it doesn't end. I haven't heard about the Porsche 928 for months. I'm a big fan of that car. , a platonic love since I saw it in Tom Cruise's film Risky Business, it was my first scale gift car and I saw every step that was taken on the channel. Now I see this project that is going very well but I feel a certain lack of love because the 928 continues without moving forward. Don't leave the project stranded

I went away quickly to do the pounds to kg conversion, then came back to hear it. 😂👌🏼

Jay! In time so I get to see my dauther play football (soccer for overseas)! The eye winking elfer on the background 🤩🤩

solution, get a CNC water cutter instead. can actually handle relative thick steel to. and no edges, smooth as a babys behind. also dont you need a tunnel for that fan? think it enhances the amount of air it pulls

Great work! Also, I want the “What the Fuch” shirt!

This build is awesome

Need four cut outs in in the corners of shroud !

It's coming together really enjoy the channel and the content look forward to watching every Saturday never miss a episode peace out 😊

During the charades segment I just yelled jackal at the top of my lungs repeatedly. Was I correct?

Thanks for sharing

I'm glad I subscribed a few weeks back. This is shaping up to be pretty cool.

Nice work, the front is coming together 2x👍

I love how Tony loses half of his hair halfway through the video that was sponsored by keeps 😂 (although due to a haircut)

That fender is looking great. I still wonder if the exit for the cooled air is large enough? I know you guys have a plan. See you next week.

Aluminium cuts alot nicer on a plasmatable if you hook up a nitrogenbottle instead of compressed air. Run it at 8 bars

Even though that fan is moving a lot of air I reckon you need a shroud/short duct around it to separate the air from being pulled radially from beside the fan instead of through the rad. (IMHO)

Curious if you’ll template off the panel you just did with your tape method to transfer to the other side. Nice progress this week!

Just casually drop two seconds of that 914 into the b-roll........that's fine, nobody wants to see more than that........everything is fine.

yessir

That shirt is sick "what the fuch"

I went on a special trip today to get Inkzall markers that I saw on here as I have been using Sharpies on my aluminium car project and they just keep dying trying to mark it.

Hey the British pronunciation of Aluminium sounds like a the medical term for a neck injury! I prefer the American pronunciation! For me it accentuates the dynamic it has!

as was probably said already ,go minimalist with the flare as it already looks great and just needs a lip any modern flare look on this would be horrifying

You will continue to have cooling problems because you do not have a thermostat that also reduces flow to allow rear cylinders to stay at an even temp throughout the engine

Fan go brrr

Merging the sponsor add with the actual build is just plain evil genius moves.....no skipping ahead....touche.

what are your plans on the doords tho? are you gonna use the origional boxter door and modify or are you going to make one yourself?

You should make another clay model of the car, and "accidentally" knock it onto the ground....

I'm not sure why you said you can't plasma aluminum, you totally can. I've done a bunch of cnc plasma cut aluminum and it usually works great. I've built more than one fan shroud that way.

Haha wheel gap is never coming back and should be the only thing you deviate from the 60s look. 😉

shouldn't the fan shroud have a lip on it that goes passed the fan blades. most car I worked on has a lip.

Maybe you will meet the “hawk tuah” girl

I think there’s too much body above the wheel. The fender should be low and sleek and hug the wheel. Look at a GT40. I’m talking about the body and not the gap between the wheel and fender.

The big fan is necessary these things always overheated im not sure if it was all the fault of the car though as much as the woman that used to drive them alot 😂

1st

The nose at the lights looks really weird.The intake is way too small.

42 episode's in , it's starting to look like Ryan will be Tony's age by the time it's done 😂

guessing this is going to get painted... not exactly DeLorean metalworking ;)

Where is the Porsche?

You can plasma cut aluminium...

So many builders use fiberglass and carbon fiber for their body panels. Why are you going with handmade sheet metal?

TOO MANY ADS.....

Worst music for this episode 👎

I just do not understand your mentality. Driving a car that has barely welded panels is plain dumb. You are throwing all kinds of c rap all over the car, which you then need to clean off before you can weld it. Makes no sense. On tap of that , there is a distinct lack of forward planning, which can ultimately bite you in the ass down the line. Surely you should build the systems for the car and prove they work , before building a body, otherwise you are likely going to have issues down the line. There are great build series out there, see Brough Builds, Fanatik or project pinky, for a methodical approach. Of course this is your project, so you can do what you like, but you often come across as hapless people with no forethought whatsoever

no rubber flaps in the plate of the ventilator.so with no ventilator working the air with driving go's through

Hey Dude where’s your safety glasses??? Are you kidding me. Old saying: The next guy is going to do his work exactly as the idiot before TAUGHT him- Sorry, no disrespect- you’re a talented metal guy, but ZERO TOLERANCE for ignoring “BLIND-EYED BILLY”, the guy with the eye patch in the corner. WE ALL KNOW ABOUT EYE INJURIES! Glasses are CHEAP- Growing a new eye is IMPOSSIBLE.