ill just carry a welding kit and an angle grinder on my keychain and weld my bike to lamp posts
@Rhydon_464 жыл бұрын
Lol😂
@meso064 жыл бұрын
This guy will still find a way to pick your weld.
@jonas29934 жыл бұрын
Oh boy that gave me a laugh😂😂
@Bigassboya4 жыл бұрын
MECHANICAL ATTACK
@bobbystapp4 жыл бұрын
Lol
@ricks57564 жыл бұрын
3:08 starts picking 5:11 gets it open Must be a good lock if LPL takes over 2 minutes to pick it !!!
@antonemartinez52393 жыл бұрын
It’s crazy cuz he essentially picked two locks in the same cylinder and still flys through it !!
@arthurheidt63733 жыл бұрын
@@antonemartinez5239 such a french waste of money to develop this shit
@frutt5k3 жыл бұрын
@@arthurheidt6373 DOM is german
@mwkoskamp13 жыл бұрын
Think he had a lot of off screen practice before making this movie.
@Thejigholeman2 жыл бұрын
@@mwkoskamp1 ya know, that's something I've been wondering. How much practice does he get with these locks? We've seen him open fan sent locks, and it appears to us that he is working with them for the first time.
@mechadonia5 жыл бұрын
This dude could pick open a welded shut steel box. I’m speechless.
@fishzara4 жыл бұрын
Wtf is you profile pic?
@UTUBESUCK6664 жыл бұрын
You are new here, right?
@DJ-04 жыл бұрын
@@UTUBESUCK666 this comment is from a year ago lol
@merlin65973 жыл бұрын
Would he be able to open the Fnaf mystery box?
@patertje20012 жыл бұрын
@@UTUBESUCK666 another year boi
@TakeoElite4 жыл бұрын
Dude you really need your own pick proof rating system going :D
@whydidyoutubeaddthis3 жыл бұрын
Actually tho that'd be pretty neat. BUt i think the reason why he doesn't is because people are always learning new things and he'd have up update old locks (and he does thousands of them) when a new better method of picking was found or whatever.
@TakeoElite3 жыл бұрын
@@whydidyoutubeaddthis well then he needs to make it a date based system, like rating from 1 through 10 with two digits behind it for the year. (and if he really would like to go the extra mile add a table to explain what exploits or picking skills came out each year so people could look it up if certain locks where rated before a new vulnerability was found)
@ajv70383 жыл бұрын
His rating system should be based on how long it takes him to pick it. For eg. this is a 10 seconds rank lock, 20 seconds rank lock and so on
@Wishram3213 жыл бұрын
@@whydidyoutubeaddthis you could get around that by making the rating system non-bounded
@YetAnotherScrub3 жыл бұрын
@@ajv7038 There are 3 factors really: Time required, skill required, and tools required. A meaningful rating would need to combine those factors.
@Sombody1235 жыл бұрын
I think most would-be-thieves would just glance at the lock and give up, not knowing where to even begin.
@dozog4 жыл бұрын
@wkruit1 ..... Who will just enter through a window at a second floor...😎 A chain is as weak as it's weakest link.
@leon13noelspy4 жыл бұрын
@wkruit1 there is now also the ix twinstar with two moving elements in the key but the most secure yet is the diamant from Dom. You can't drill these locks open and picking should be really hard on them
@jimmy171720044 жыл бұрын
The lock mechanism itself is great. It's not snap proof though. Look at the midsection. That won't support a man's weight and there are no anti snap break off sections. You don't need any skill to break that lock in the real world, just good pliers and a bit of muscle/body weight.
@pjmillah21724 жыл бұрын
Unfortunately most burglars used forced entry randall keys useless.
@MG-lg6tg4 жыл бұрын
I also doubt it would be as easy to pick, if the lock isn't oriented upside-down. You'd need an extra hand to hold the tension wrench or you risk damaging the lock. In that case it might remain locked permanently.
@davida1hiwaaynet4 жыл бұрын
That's a very fascinating idea where the lock re-keys its self with the construction key and the steel balls. Thanks for sharing this with us!
@bakatov3 жыл бұрын
DOM used to be able to supply this lock with 3 types of keys. 1 full key (left and right - masterkey) 1 left key 1 right key The person with only the left key, needed the person with the right key to make a full key and open the lock. I think we have one in the shop somewhere if anybody’s interested
@ahuma69522 жыл бұрын
Why not just have two locks on the same chain? Or on a door, two bolts?
@kotzikacki7658 Жыл бұрын
Yea I'd be potentially interested
@Qblaze6 жыл бұрын
Am I the only one that loses faith in some of these locks after watching him or others just tear through them? Taking 2-4 minutes to manually pick a high security lock is quite intimidating.
@Khronosian6 жыл бұрын
Sam Carlson, often, but not always, he remembers to remind people that he's a _professional_ with many years' experience. I'm a hobbyist, and this lock frankly scares me shitless. Street hoodlums and general thieves and thugs would be left with only the option of destructive entry. In short, the locks are far from bad, LockPicking Lawyer is just really, _reeeeally_ damn good.
@adamnichols4766 жыл бұрын
Every lock is pickable with a few exceptions. This guy can pretty much get through anything and that most criminals would not invest that much time learning.
@MrTrilbe6 жыл бұрын
most locks are not meant to keep people out, they are meant to delay them or make it not worth the time or effort and now it seems so intimidating that they wont even try. Not to mention with a lot of the locks shown, LockPicking Lawyer has practised picking them before filming to do the research needed to make the video so has a good idea where the sweet spots are
@DerekHundik6 жыл бұрын
is there any lock he couldn't open
@cageordie6 жыл бұрын
So far, Bowley. It took him a good while to do the Mul-T-Lock MT5+ and Abloy have good luck getting any Protec2 videos taken down. If anyone has a different answer I'd be really interested to hear. My new house is getting Bowley locks on all the conventional entry doors.
@thejumperkin3 жыл бұрын
I appreciate the fact you covered and commended their simple rekeying feature with the extra keys, I feel like that's really quite important to consider for a lock like this
@NoctisMotus7 жыл бұрын
Nothing more menacing-looking than a keyway with devil horns. ;)
@elcaponeholyemperorofnj11693 жыл бұрын
🐮
@st4rlightr4v3n43 жыл бұрын
More like system Tenacious D
@NoctisMotus Жыл бұрын
@@st4rlightr4v3n4 hehe
@MrMojo13ification4 жыл бұрын
I imagine Dom eating ice-cream and crying while watching this video 😂
@LockNoob7 жыл бұрын
Great lock and explanation of the ball baring mechanism :-)
@alinmarianbalasa93314 жыл бұрын
Now my doubt about the construction keys is solved. THANK YOU SIR!
@jarred2814 жыл бұрын
You know, I would have never thought I'd watch 20+ videos on picking locks but these videos are fantastic. It calms my mind from running. I subbed a few days ago and I haven't found a single video of yours that wasn't interesting, your calm demeanor is great and the videos don't drag on before they get interesting.
@ryanincro176 жыл бұрын
Your commentary is why I keep coming back. Keep the videos coming!
@Bartooc4 жыл бұрын
When you wake up in the middle of a night. "One is bindin', got a click there, got a click out of two, little something out of three, four is loose and five is loose."
@outbackcountry5124 жыл бұрын
Soon as I hear that , they will hear the racking sound of a certain device that passes out Darwin Awards , it's simple play stupid games win stupid prizes !
@THEZWARRIORWAR4 жыл бұрын
Walter Baker you do realize LPL has his own share of guns right?
@LeifNelandDk4 жыл бұрын
@@THEZWARRIORWAR , even LPL can't pick a lock and fire a gun at the same time.
@lemting22644 жыл бұрын
@@LeifNelandDk are you sure about that?
@LeifNelandDk4 жыл бұрын
@@lemting2264, well, I'm not going to put it on the test.
@TenzoUK4 жыл бұрын
You can make it as difficult to pick as you like, but drill prevention is paramount
@sodalines5 жыл бұрын
I love this lock. its been my favorite lock for forever now. They are hard to find. great video bro.
@hellomate76812 жыл бұрын
Talking about "System D" it's also feels like about some Linux has initial system that have complex but can get breach. 😆
@AlbertLebel6 жыл бұрын
That's a beautiful lock. Well made. Not sure I'm ready for something of this caliber yet, But I'd love to get my picks in one some day. Well done LPL.
@colonelgraff91983 жыл бұрын
The Dom lock: what all Subs fear
@alexandrusima15202 жыл бұрын
crave*
@Will-mk5pj2 жыл бұрын
lol
@NaerenVastir2 жыл бұрын
that was a solid 2 minute pick from LPL. better than anything masterlock has thrown his way. lol
@ivanljujic41285 жыл бұрын
Watching you pick all these locks never gets old. You kinda make it seem easy, But it's probably harder than flying a plane with no wings.
@samcarpenter23993 жыл бұрын
Until I started watching your channel I wasn't nearly as interested in lock smithing or picking. Now I'm seriously considering taking up and learning such a valuable trade. Great job and well done 👍
@Max_Marz3 жыл бұрын
Think you'd ever be able to tour some lock manufacturers to see how something like that crazy keyway is cut? As a machinist I'm pretty interested to see how thats even done.
@frutt5k3 жыл бұрын
I guess they use this: en.wikipedia.org/wiki/Electrical_discharge_machining
@Max_Marz3 жыл бұрын
@@frutt5k EDM is a very slow process, I'd be shocked (eheheh) if they edm'd out every single core. Its more likely a specialized broaching operation I'm just having trouble imagining it.
@frutt5k3 жыл бұрын
@@Max_Marz That leaves only one method: an extruded 'blank' in which the pinholes are drilled
@Max_Marz3 жыл бұрын
@@frutt5k "Only one method"?!?!?! There is no such thing in manufacturing young grasshopper.
@SalisburySnake3 жыл бұрын
I also used to be a machinist and love looking at tool marks to figure this stuff out. I don't think there's anything exotic about this one though, it's really just 2 normal keyways side by side. I'm fairly sure most keyways are broached, but I haven't seen it done. For the non-machinists here, broaching is a process where you would make a starter hole and then push or pull a long skinny tool through with teeth on it that progressively cut the shape. Each tooth gets closer to the final shape until the last tooth finishes it. Wire EDM could certainly make some wild keyways in exotic materials, but I'm not aware of it being done. It's extremely slow and expensive. It would be a top choice to make a one-off challenge lock though.
@rustylocks13307 жыл бұрын
Great video again, I have been wanting to see the internals of these for awhile and haven't had the balls to take mine apart. Well done LPL!
@Pheonixco4 жыл бұрын
" I, Aku, the shape shifting master of darkness, unleashed an unspeakable evil. But a foolish samurai warrior wielding a magic sword stepped forth to oppose me"
@_Stormfather3 жыл бұрын
Comments you can hear
@LockpickingNord7 жыл бұрын
Wow Dom build the good stuff! And you did a superjob on this fine Lock!👍 The core and the pins remind me of the IX10.☺ Greetings from Germany
@geoffowen76274 жыл бұрын
What a really nice. Lock, definitely looks like a fun pick. Great work as always.
@Thedoug3695 жыл бұрын
I've been subscribed and watching your videos for a while now, and I have to say that you sir, are truly a master of your craft! I'm new to lock picking myself, and your vids amaze me almost every time. Keep picking, and teaching!
@zahidlatif8745 жыл бұрын
I enjoy your great narration, voice and English ...
@leporid2574 жыл бұрын
commentors: omg that's a devil!! me: that's a cow
@TheAuron323 жыл бұрын
Hell Bovine from Diablo 2?
@Thestudiosforadventuring3 жыл бұрын
Me: it's a spider!
@thatguybrody48193 жыл бұрын
@@TheAuron32 that's the secret cow level lock.
@TheAuron323 жыл бұрын
@@thatguybrody4819 Moo? moo.
@thatguybrody48193 жыл бұрын
@@TheAuron32 moomoo moo
@theavidpicker27217 жыл бұрын
Very nice and strange lock! Great picking LPLAWYER! I really enjoy these videos that showcase the strange keyways and actually picking them! I just got my first smiley keyway padlock and I am going to have to go through and search for the best way to tention it.
@Guust_Flater4 жыл бұрын
What !? A video over 13 minutes? I'll buy this lock without seeing the video! This must be some kind of record. 😃
@IronShadow934 жыл бұрын
Calm your horses, most of it is disassembly and explaination of how it works. He opened the lock in under 3 minutes.
@HappyDude13 жыл бұрын
@@IronShadow93 Thats a very good lock then! Most of them he opens under 30 seconds
@blainelanders23612 жыл бұрын
Mad skills man. I also like the previously suggested idea of you coming up with some sort of 1-10 rating scale on lock quality with categories like build quality, pick defense, brute force defense, price points and so forth. I watch most of your videos not so much from a locksmith point of view but on engineering and construction. I am wondering with all your success on picking how you might rate any particular design so someone like me would get a better understanding on how this industry is evolving and what designs are really better. Thank you sir.
@Graff-zr3tn4 жыл бұрын
Another rather unique appearing lock overcome by this guy, who made short work of it again. Very impressive.
@danielroglich33094 жыл бұрын
Great job picking brother as always, what crazy lock. Love that crazy keyway also,thanks for the review!
@iandoesallthethings4 жыл бұрын
Great SEO on this video title! It'll attract a ton of people who are looking for the Behringer Model D EUROrack synthesizer. 🙃
@nelsonnipo7 жыл бұрын
love the lock!love the key!very nice video.
@LogicBob7 жыл бұрын
That keyway is EVIL looking! 😈
@DanafoxyVixen5 жыл бұрын
looks like Bull horns to me.. is that the new evil? its hard to keep up these days
@Operational1175 жыл бұрын
Logic Bob Or just WILD lookin’! 🐮
@some12343215 жыл бұрын
A Devil's Keyway ;)
@secretagent59545 жыл бұрын
sos your mothers twat
@hangrygrampa55114 жыл бұрын
Just stick it in a bag of cocaine
@LiqnLag4 жыл бұрын
When I was stationed in England, the dorms all had those DOM dimple locks you showed briefly. The day I arrived on station the dorm manager game me my key and said 'don't lose this key or it''ll cost ya over $200 dollars get another and is a pain in the ass to get done'. No one I knew ever lost their DOM key =)
@nachtelfirokese884 жыл бұрын
Just a question because im curiouse, those Dorms? Are they single persons Dorms or for multiple Person? Because i think about it a bit cause LPL mention each new key make's all other key's obsolete! Which means, if those dorms are for more people than, lets say 3 person, the price is freaking high.
@LiqnLag4 жыл бұрын
@@nachtelfirokese88 Initially they were for 2 people, then the war happened and had cleared out half of us .Command realized the rooms were for a single people during that period, so I came back to a single room for the remaining 6 months of station. The service tended to do things the most expensive way but to be honest, those custom aluminum arming wire pliers that prolly cost far too much to craft were god sent.
@themadhatter47617 жыл бұрын
A very interesting lock, thanks for the video. 👍👍
@Chris-ui2sb7 жыл бұрын
I've seen this on some old cigarette vending machine and thought it was a pretty high security lock. Nice work!
@parkerlreed6 жыл бұрын
What will systemd swallow up next!
@alessandroceloria5 жыл бұрын
Next month release: Systemd will now handle key storage as well as your home's doors and car ignition. All of this can be managed by the handy lockctl command. Every access attempt will be registered into your binary log files.
@flograuper92945 жыл бұрын
Found the Linux user
@psider15224 жыл бұрын
Poettering strikes again...
@intelfx864 жыл бұрын
I was looking for this comment.
@Omnihil7774 жыл бұрын
sudo systemctl start openlock.service
@vf124974394 жыл бұрын
I would say I'll just tie a rottweiler to my bicycle outside the store.... Lock picking Lawyer, click out of one, two is loose another biscuit for my new puppy Lucifer and a click on 3......
@acrinsd3 жыл бұрын
We used these types of locks 30 years ago on construction trailers. We had one locksmith who could re-key and make keys. He was the only one in the county who could work on these locks.
@Potti3147 жыл бұрын
Wow, that's a cool lock - thank for showing.
@georgelee2433 жыл бұрын
Showing before n after inserting the key before taking the cylinder apart will be a great help in your explanation.
@SasquatchPJs2 жыл бұрын
That ball bearing key change is so damn smart. I love it.
@stevenr.rodriguez99972 жыл бұрын
I was just thinking about a design like this! That’s nuts how good the algorithm is to literally read my mind.
@martyhastings93477 жыл бұрын
thanks for the video.... It did not seam like the "right" side did much. looked to me like most of the picking was on the left side pins. am i right? seems like the biggest feature is the shape. (Kind of hard to get a bump key)............Also it seems to me that i can pick a lock when i an sitting at my desk, but when its on my door it is hit and miss if i can pick it or not. ..........by the way could you show us what to do if we break a pick in a lock?
@John_Ridley5 жыл бұрын
ISTM that in addition to rounded or slanted pins, an alternative (though more expensive) would be to have radial pin rows.
@cassandradawn7803 жыл бұрын
so i'm a linuxoid and i thought so many things until i read channel name
@ikhifeli54434 жыл бұрын
Why am I watching this instead of studying for my finals?
@e2smodeltrainz3453 жыл бұрын
idk
@Terminator4843 жыл бұрын
Bet you learn more about engineering here than you ever would in school.
@MadScientist2673 жыл бұрын
Because doing finals won't get you anywhere... Watching LPL will open doors for you...
@RemusLt4 жыл бұрын
Manufacturer: Dom "System D" Euro Profile Cylinder! LockPickingLawyer: a piece of cake.
@jaimedelgado75294 жыл бұрын
That rekeying mechanism is such an elegant solution.
@Carpenters_Canvas2 жыл бұрын
I’m just getting into it , got my first cheap pick set coming . I have picked a couple cheap small locks with semi decent consistency. Stuck on a 60 MM padlock from ace. I’ll prolly do better with an actual tension bar and pick Using a wiper blade
@SkyfalconTin3 жыл бұрын
Thank you for making videos about locks
@Twobarpsi5 жыл бұрын
Well here I am again watching another one of his videos LOL
@dragonalpha4333 жыл бұрын
DOM is somekind of a Standard Lock preducing Company in Germany. They build Budget Locks for about 10 - 15 € ( 11$ - 17$ ) and High Quality locks like the D-System for something abhot 140€ ( 174$ ). In Germany we don't have much Real Good Lock Companys there are Only ABUS, DOM, and a Mid Budged Company called Meister ( Master ), so almost all rental Houses are equiped with DOM or ABUS locks. Some are Good, most are bad because the Landlords oder Rental Companys don't wanna spent so much money. In fact it's normal that a Person / family that move in in a Rental House / apartment is switching the "build in" lock from the landlord with a own lock, because the landlord don't hand over all keys, they always keep a key so they can enter your apartment if there is some Pipe Breaking, Gas or Fire Alarm or any other emergency. If u have Private Landlords, sometimes it happens that the landlord enter your apartment even if u don't are at home, but thats not allowed. A landlord has to enroll an visit more than 24Hrs. before he stands in front of the door. In This case the DOM-D System isn't aviable in germany so maybe ist just an lock preduced for the oversea Market. In germany it's actual "State of the art" to use some Electronic Key systems ( Mobile Phone, RFID, Code, Bio-Scan ( Finger, Eye, Hand Veines ). Mostly all bigger companys ( BMW, AUDi, Ford, ) and some Hospitals, Super Markets and Gas-Stations are using Bio-Scan / RFID combinations or some Key / Bio Combination. After your Vids about destroying a ASUS Fodable Lock, and some other other "Made in Germany" locks, i decided to Use a Kryptonite Bike lock for my new Trek Roscoe 2021. Thx a lot for your nice Vids and protecting me for a bad Decision for a Abus Folding Lock. Because in germany the Insurence Com. and the Police say that a Bike Theft / Intruder uses only about 3 Minutes to Open a Window, a door or a bike lock with portable tools ( Screwdriver, crowbar, hammer, metal foils, saw's, and spanner ) no elektric grinder or hydraulic diven tools. Because they are loud and we don't have so much Space between Houses that u can use a loud tool. Most Intruders will try to open a non-Closed window, or a door that is just snap in the frame without locked right. i hope my English isn't that rusty ;) Greetings from germany
@Myoldusernamewasevenmorecringe2 жыл бұрын
I wish you'd use one of those mics that pick up the sounds of acoustic guitars on the locks. That way we could hear all the clicks that you're sensing. 😁
@tunafish32167 жыл бұрын
Wow what a different lock very cool.
@cliffp.83965 жыл бұрын
Impressive work
@metamorphicorder7 жыл бұрын
looks snapable. sweet though really cool lock. i wish it came as a kik half so i could put it inside a stanley 24 7. thats a badass key.
@Hessi3 жыл бұрын
Wow. Now that's an ancient registration card! It's at least 28 years old, because it still has a four-digit postal code printed on it. Moreover, DOM belonged to Emhart only from 1982 to 1988. Since "Emhart" looks like a small sticker, the card is probably almost 40 years old. Where did you get it?
@edwardranno7119 Жыл бұрын
Interesting
@rosestrohm79864 жыл бұрын
Deja vu! I have seen this lock beforeee *eurobeat intensifies*
@christianbh5 жыл бұрын
The construction key design is very clever
@thumperlockpicking92694 жыл бұрын
Fantastic picking Mr.L.P.P, WOW
@sadoldgit3132 жыл бұрын
Glad I retired from my Locksmith business five years ago! The amount of gear you need to support the plethora of different locks would mean a bigger shop!
@mike-ology222 жыл бұрын
Mr Locking picking lawyer. Thanks for sharing your insights, your expertise is much appreciated. I've just recently watched your seminar/conference video and like what you are doing. Because of you I have taken up lock picking too, just to see how easy it would be for a novice to open locks. Also, using your videos to make sure any lock that I buy, is a secure one. So thank you. As for some of videos, I've noticed you have put the lock upside down in your vise, which isn't the normal procedure of opening the lock. I wanted to try and open my front door lock, it didn't work. I then went on to watch some of your videos like this one to learn any tips and tricks, but the lock is upside down. Would it be possible to remake these videos so its easier to understand what is going on? I've also heard you speak about the pins being different with different carvings, what is the purpose of this? Why would that make a lock better or worse? I'm also trying to make a difference and want community driven public education on all matters. Check my about page for more info. I appreciate your time and thanks again for sharing. Mike, from England
@sodalines6 жыл бұрын
I want one of these in the worst way. I love the shape of the key.
@mxcollin953 жыл бұрын
Cool lock design. 👍
@ckoegl2 жыл бұрын
I'd really like to see a "reassembling video" of this lock!
@TheGeezzer4 жыл бұрын
Well done for picking that intimidating lock! Yeah the axiom "shit-hot" comes to mind. DOM must stand for Dammit Opened Me! 😮😆💨😋💨😎💨😉
@rickburrows43042 жыл бұрын
The chainstore TK Maxx in the UK has all their roller shutter keyswitches retrofitted with these cylinders in place of the original GEBA, as all keyswitches are internally sited and nearly all shutters covering windows, often wondered why they bother improving the security of the switches and add the difficulty of sourcing/replacing restricted keys when most other stores have push buttons or rocker switches tucked away nicely out of sight and public access.
@officialcherto3 жыл бұрын
8:38 that ball flew away when you did number 1
@wissensfrosch2 жыл бұрын
Since this is a German lock, I have to tell you, that you have put it upside down. It is weird at first if you see people using keys upside down. Would that actually make it harder at first to pick the lock when it is turned 180° to what you are used to? Does anyone know the reason why Europe and the USA put in locks in opposite directions?
@VoltisArt2 жыл бұрын
The springs should be enough to make the process of picking or using the key the same when flipped. I'm not sure about a reason Europe would be different, but I've been taught to mount locks with the pins up, in order to keep potential debris (including scrapings from the key) out of the pins, along with dust and residue from weather. This would be moot with keyways that don't have vertical pins.
@klausbrinck21372 жыл бұрын
They don´t. They simply don´t care that much about the direction. If u move to a new home, u may have a lock that´s put the other way around, it has happened to me many times. And about using the key upside-down, well, they also don´t, they simply use the key the way it matches and opens the door (after using a new lock once, u get used to it for the next million of times). None is confused by an "upside--down"-lock. For a lockpicker, on the other side, I guess it makes a difference, I think most people are more comfortable picking downwards. ...
@chemusvandergeek12095 жыл бұрын
Good lard, just using a practice lock is hard for me; this looks insane. Gotta get in the rest of the 9998 hours now.
@chemusvandergeek12094 жыл бұрын
Unless the pins are stronger than the cylinder and housing, that keyway seems like it makes forcing the lock _easier_ rather than harder; you can put in a much beefier bar to try to twist the cylinder.
@HibikiKano6 жыл бұрын
Lol @key cards. So far had 3 locks with key cards. Have never been asked for the card when I wanted new keys. Even got keys for one of the locks from a non licensed dealer.
@rich10514144 жыл бұрын
Even if the store enforces asking for cards, bringing the core itself will also do the trick.
@HibikiKano4 жыл бұрын
@@rich1051414 Perhaps, but bringing just the spare key shouldn't.
@rich10514144 жыл бұрын
@@HibikiKano You are right, but try convincing locksmiths to turn away customers...
@gadgetdeez70692 жыл бұрын
The teardrop design is pretty smart. It allows them to have a single set of slanted key pins and drivers. If you took a pin from one aide and installed it in the other side, because the receiving teardrops are orientated, the pins will always be oriented correctly, side inspecific.
@gadgetdeez70692 жыл бұрын
Funny fun fact, ford did this with their over head cam 4.0 v6. They made 1 head for the engine that fits on left or right side. On one side the chain is in the front, on the other side the chain is in the back. Same with your pins tear drop design. 1 pin design works in both sides.
@bird7186 жыл бұрын
fascinating lock and key... unfortunately it is not practical due to thick keys.
@josephpalmieri30954 жыл бұрын
Fascinating.
@ahackercalled4chan3 жыл бұрын
wow this was a gnarley lock!!
@matthewkriebel73427 жыл бұрын
There are ugly tool marks on the face of the core, above the keyway. Do they come like that or was something ground off?
@mattshicks99347 жыл бұрын
Nice lock, nice job! I watched your video on tension, and I watch you tension each lock, it seems very strong. I bend and break pics when I try and pick like you do with more tension. Is there something I'm getting wrong?
@TheScramblerTV3 жыл бұрын
Lennart Pottering is at it again!
@Alexander_l3225 жыл бұрын
The way you have this lock oriented makes the key way look like a bull with 2 horns!
@christopherlawler30336 жыл бұрын
The ball-bearing mechanism is known as the "lost ball method" and is very commonly used by many lock manufacturers for construction keying.
@notahotshot5 жыл бұрын
Wow! Is that why he mentioned it in the video? Probably not.
@forric235 жыл бұрын
Seems such a shame they went to so much trouble with the pins and keyway and key control but the lock body still seems to be susceptible to lock snapping. If it had a stronger midesection and a few anti snap features it would be a lot more intimidating.
@jeffmoss267 жыл бұрын
man that is cool!
@lambdanil5 жыл бұрын
Oh no, SystemD! (GNU/Linux reference)
@CamdenBoyd3 жыл бұрын
Got real excited seeing it was 13.5 minutes and thought it would take till the end of the video for him to pick 🤣🤣🤣🤣 slightly disappointed lol but it's fine.
@Quacks03 жыл бұрын
That lock certainly does look pretty "wild" to me --- even the keyway-opening looks like a wild horned animal like a bison or mountain goat :)
@JEMHull-gf9el7 жыл бұрын
I was wondering if you would ever get to the system D. Was that Drill protection ceramic? it looked to be a different color then the metal surrounding it.
@moefritz62255 жыл бұрын
J.E.M. Hull just hardened steel.
@deltacx10594 жыл бұрын
If you work in a machine shop you can 3d scan the key and use a CNC mill to make your own copy
@Zorgdub4 жыл бұрын
I was looking for Initial D Eurobeat, but this is fine too.
@CoolAsFreya2 жыл бұрын
With construction keyed cylinders, does picking present a risk of disabling the lock? Since it's highly unlikely when picking to get all the wafers (or ball bearings) above or below the sheer line, you could make it so neither the original or new key worked?
@joshuaabbott7498 Жыл бұрын
I love watching your videos I’ve always been fascinated with picking locks is there a lock that you can’t defeat?