Yes! I try my best I have a lot customers of both sides!

Check out freddy lsx it’s like 90 percent English

@@Tazerect ong, they never speak spanish anymore. back in the day they barely spoke english perro 🤣🤣

No problem 👍 truck put good power!!

What exhaust system are you using

The dog bro 😢

Just seen one in The Valley. L87 put good power!

What did you do I’m trying to do a l86 10 speed on my nbs

@jmg_2_slow74 well I did a LT swap because I want a reliable setup. Take it to mexico, anywhere I want. If you looking for max performance I would keep it LS but built. LT fuel system it's expensive. But if yes, it is possible and not hard. I made my 03 cluster work. All my gauges work with the 2022 engine setup.

This truck had the 243’s with ms3 cam on nnbs intake out down 428. Not bad

@@Elvis55 now its new setup spicyy!! what would you think I’ll put down with e85?

@@Elvis55 @jorgemoreno8316 Post some videos of your build, I’d love to see how it comes out and sounds. I’m building a lq4 with 243s polished and milled .20 with a tsp 220 and 5.13s. Lifted 4x4 on 38s build. And same excited to see what I’ll do especially with being a 4x4. I’m predicting at least 350 rwhp. I’m also doing larger injectors, and 30 overbore. I’d like to try a 4 barrel efi with a single plane intake for the snappy throttle response and the aesthetics however from what I’ve seen I may lose low end. Likely throw a tbss intake to play with different setups and see how it responds. That’s what it’s all about right?

@@Elvis55crazy that’s my set up on my c10 !!!!😮

SBE 6.0

Injectors son de FIC fuel injector connection, y son 60 libras. Fuel pump es la 450 walbro Manguera es la original con un regulador de gas. That port it intake should be a good test.

@@Elvis55 6.0s are underestimated, but they sure can get up there before doing some serious mods. Good content 🔥

Lq9

No milling, and converter it’s a 4c

Yes we running the 102mm

@@Elvis55 just checking, i thought you had to use the 105mm for it to flow with it

@@MyTiresDontBurn it will help more using the 102mm intake with throttle body. But you might not see much difference. This guys bought the parts from another guy for a good price.

Yes, heads are stock mill

@@Elvis55 ah ok thank you

What other mods you have, like gesrs, stall converter & headers?

@@Elvis55 I have a 3600 fti 4l80e lq9 headers cam and 4:10 gears

@@Elvis55 or should I do heads and cam and run a tbss and do the Holley later on

@@jankycustoms6089 with that stall converter and gears get a bigger cam, something around the 238/242. You will gain good power combine with the Holley.

​@@jankycustoms6089Throw that cam away and get a better one

Summit Slaes the throttle body cable. Lokar Hi - Tech LS throttle body cable.

@@Elvis55 what about the pedal. Did that truck come with a dbc or dbw

7.52 this truck using ls7 lifters.

Fuel pump it’s a 450 walbro and injectors we are using the FIC 60 lbs. (Fuel injector connection)

@@Elvis55 thank you brotha 🤙🏽 badass set up

No, unless your maxing your injectors. But adding more fuel will not gain more power. You do need to get your AFR at a hood point. Some builds like a little rich or with more air, not where you ganna lean the engine.

We shifting this one at 7k

@Elvis55 what rpm do you recommend boss?

@@1lowNNBS shifting with similar set up, 6,800-7,000

Thanks for the info!

And what head gaskets did you use?

No flycut

F35 from Texas speed

93

@@Elvis55 Awesome

We been thinking of doing one.

We just link them. F35 camshaft 257 Prc heads from Texas speed Holley hi ram Ls3/L92

Will this set up work good on 6.2 ls ?

60e and 4:56 gears

@@Elvis55 lq9 id say ?

🖕🏼a 80e for N/A the 60-65e will work just fine just has to be build right

We have a 4K stall converter and 4:56 gears, to make up on the low end.

Yes

4k