I bet this guy gets a plush toy on every try.

Either slow down the feeder all or put them in one at a time. It goes down to about 50% duty cycle every time bogs and has to back up. Other than that it's incredibly powerful

I will bet you can run two single trees through that chipper faster than you run two the same time.

it move quicker with one pice at a time than with two or more

If toilet paper is made from trees, does that mean we wipe our arses with wood?

it needs more hp or slower rate of feed

Looks like they need an 1100 HP Wood Shredder.

It sucks once you've bought your 550HP shredder only to realise that it would have been worth that extra $150 for the 600HP version.

That's bloody terrifying, that is!

Ongoing isue with these chippers. It needs a smarter feed system to stop the rewind and slow the feed to match the grinding wheel.

I would rather use a chain saw and have the fire wood!

Hard wood-soft wood probably makes difference.

I would have made a lot of firewood logs out of those. What happens to the woodchips after, do they go to a biomass power station?

I think feeding it too much at a time is less efficient and slows it down a bit. But I have no experience in this job, so I could be wrong.

What a cake job. :)

Why not let the wood finish chipping that's in there before you stick more in?I'd rather see a continuous slow run rather then stop start stop start stop start stop start.

well it works fine if you don't try to jam 8 logs at a time

this is not wood, this is the entire log

Where can I get one? And also does it come in blue?

Wouldn't it be better to grab the logs past center a bit so the part you feed in would be lower than the grabber so it would be easier to start the feed. I rarely see an operator grab the logs and try to feed the high side in.

You can run 3 logs faster one at a time than you can run two logs at the same time. I Don't understand why he keeps sticking more than two logs in ?

I think another 550 HP will do halt the bogging and rewind operation :}

The first time I saw this ,I could not believe it would work so easily ,well ,550 HP ARE not too much..

this is cool

Good job !! From Brasil ! São Paulo State

Gets the job done I guess, but this has left me with an empty satisfaction, especially that bogging. Looking at the discharge tube size, one should expected such results. I reckon different approaches of engineering could bring better results with similar power levels. Satisfying machine = one that does not bog down, no matter how much you try to make it haha~! #LustForDestruction

hate these amateur Noobs at loading a machine of this complexity... Once the piece is in the "roller" DO NOT MESS WITH IT!!! The machine struggles with itself, much less trying to deal with the operator Forcing stuff down it's throat...

Warum macht man das holz klein? Zu gammelig um es zu trocknen und zu verheizen?

happy new year

You could argue 25 minutes is a little too much

Obviously the motor is way to small for the job, PLUS the operator is way over stuffing the machine. It's like cramming TWO cheese burgers in you mouth at one time, try chewing on that.

Mantap

No way in hell this thing has a 550 HP motor. If you know trucks and the engine sizes this would be obvious.

Der Typ hätte ich entlassen weil er die ganze Zeit die Maschine am Limit hat. Mir tut das Ding mega leid 😪 😥 😥.

Why are chopping up those logs they look good enough to be used for lumber to build things

Seems to lack power and toque as if it has to pause to avoid bogging down.

I do admit, those logs look like scrap. Maybe old dead phone poles….

Pls let me know How much the price with this machine

wow, but why the fuck would you shred actual timber?

I'm wondering if these are insect-killed trees; might be spreading the eggs all over if they're not burning the chips for fuel.....

Unless there's a market for those chips this is just a monumental wastes of fuel and machinery .

and then he does it again. I would fire his ass for abusing the equipment

Nick Fragile Jr covd19 Michigan tory good morning coffee ☕ coffee ☕ Monday December 12th happy Christmas 🤶

very good operator and a cool job, I greet

Wonder if you could put a saddle on one of those poles for my xwife?

take that, mother nature!

And another amateur loading!!! Therefore 👎👎👎

It dont Look Like 550HP to me... i Worked on a 400HP Machine and it was much faster :P

je y a beaucoup de personnes sans resource et qui seraient heureux d avoir du bois pour ce chauffer eh bien non c est mieu de tout detruire pour en faires des meubles de bois compresser qui ne tiennent meme pas lors d un demontage et remontage ils finissent de la meme maniere que ces pauvres arbres scandaleux ils faudrais que ces patrons crevent de froid et la on verras s il detruisent encore des arbres honte a eux

25 minutes of log crushing. Pfff.....

What a waste of horsepowers...

For a shredder with that much HP it seems to perform rather slowly. I have seen an 80 hp machine that was just as productive

this are dead trees from road accidents , nobody wnat this wood , so it will be schred in pieces for wood pellets

SCHADE UMS HOLZ

way under powered

J

weak

And ladies and gentlemen :, this is how we destroy our own planet ! THANK YOU.

This machine has s way to slow to be watching this video

I need it contact me

Warum macht man das holz klein? Zu gammelig um es zu trocknen und zu verheizen?