Great build…I wish I was 20 years younger and still had ambitions like you guys. Don’t forget to change the fuel pump while it is easy to get to.

Great project! Love seeing these father/son builds. Keep up the good work. Can't believe how well the wheel base matches on those two vehicles.

Damn, such a nice garage set up with the lift and ROOM!!! Awesome project, you are fortunate to have a father that you can do this with, very cool and all the best....

I’m in ! Good luck with the build and glad to see you and your Dad are working on it together. This build will be unforgettable memories for you both! Miss having my Pops around to do the same! ENJOY and keep the videos coming.

A while ago I watched Brent @ Halfassed Kustoms do a 65 for a guy that already had cab swapped. Might be some good input there. Just found your build n thought I'd watch along. Thanks for sharing 👍💯

Great Job Joffrey and Dad on taken-us on a adventure of putting a 57 truck body on a 04 Yukon frame. from the look of it, it should look great..

If you have the opportunity to rent a small sand blaster it will be the later "making of any finish you put on it". Get some masonite panels, 2'x3', to use as deflectors to keep away from "soft" parts- and yes, you will burn up a whole sheet doing this. Dad sounds to be the man for the line jobs- his work looked pretty good even after you struggled it out from under! For your "new bushings" at the bed rear- the hot rodder's favorite- league hockey pucks! They are about a half inch- 15mm, I believe, thick and drill and shape like wood, have few vices and are totally water proof. Before you are done you may wish you had kept the Yukon wire harness, if for no other reason than as a pattern- the firewall is falling within a few inches of where it was, the dash is going to be about the same distance away. Will Dad be running any shop cams- in toto, this will be a "low bucks, high outcome" sort of build that fairly recent gear heads could tackle! FR PS; Happy New Year, to both of you setting out on this journey. I never got to know my father in that way- I think we both missed out on something, you don't need too! fr

I did a 64 f100 on a 2004 2 wheel drive frame. I used to yukon bidy mounts and just moved them. It was a fun project. I still drive it.

I can't wait to see more of these videos and hope you build more like it. I'm in Rome Georgia

You’ve encouraged me to video my build….56’ international fire truck cab on a 2000 Dodge 3500 chassis. I hoping it’s as fun as I have envisioned!

Cool project, I like those E-Z Chassis parts. I'm doing something similar putting a 67-72 C10 body on an 04 Tahoe that looks just as crusty. I'm planning on using the Tahoe floor and firewall though so I can keep all the HVAC goodies. I also post videos of where I'm at but always cool to see how someone else is tackling something similar. Keep it up! Love these old trucks.

awesome father son project. cherish every minute you get to work with him.

Looks like a fun build. My 57 is going on a 02 2500 Avalanche frame, one of these days. Good luck

It's looking great! Thank you so much for posting.

What a great video. Hope you keep posting more.

Cool truck hope to see you on power tour

This is going to look amazing!

Love the way it looks.

I'm not going to lie that frame looks amazing for the older body 😍

That kit has be worth its weight in gold!!

Awesome, looking forward to this as it proceeds

Awesome video. Can hardly wait to see the next one. Great work guys !!!

That was great! Well done. Looking forward to more videos when you get the chance. (Those two looked like they were meant to go together all along)

Nice fit! Looks good. That kit made it super nice.

really cool project ! thanks for sharing chassis swap info

Following this for sure!

Ran across this and subbed just for this build!! Very interesting waiting on your next video to drop!!

Cool project, I love those styles, I'll be watching the series for sure. Merry Christmas

Loved this first video. You guys are doing a great job. Thanks for sharing with us.

Cool build. Fun build

This is a solid project for certain-thank you for sharing your father and son journey!

Yes very cool look great well done

Giving me ideas this is my wife's dream truck but I want to update the running gear so this is perfect

I've always liked that body style(55-59?). The Tahoe looks like a perfect match. I thought modern trucks were wider than the older ones but looks like a great fit. Carry on and we'll keep watching.🇨🇦👍

Great idea!

That's gonna be awesome.

27:37 Pretty cool. I plan to follow along with the further episodes.

Cant wait for the next video

Awesome, I can't wait to see how it goes and what parts you can reuse and have to purchase!

Keep the videos coming my new friends and Merry Christmas !!! 🎄

Thats cool man . Love your video

Lookin Good!

Great idea, I cant wait to see it progress. Thanks for sharing.

fits like a glove.... Good deal

Hi Joffrey, This is exactly what I wanted to see. Trying to get my hands on a '48-'53 Chevy PU and put it on a newer frame. The concepts will be the same. Thanks for sharing your adventure. Can't wait to see more. Bart Vancouver Island, Canada.

That's a great way to upgrade the 57. I enjoyed the build so far and was impressed with the progress.

Awsome video ill sure watch where this goes

Great build project I love it Definitely 1 of my favorite body trucks and ive thought about a Tahoe or Yukon chassis but never knew they made a kit. I wish I could find one to put a 1985 K5 on a 2000 up Tahoe or Yukon chassis

Love this project. Great Progress. Looking forward to following along. We're wanting to do a 40-50s pickup project ourselves!

Great job. 🎉 Happy belated birthday. 🎉

Nice project. I'm adapting a 59 Apache to my 2004 Tahoe chassis. I saved the front Floorplan and the firewall from the Tahoe to give me more leg and head room in the Apache cab. The floor and firewall of the 59 were chopped up from a previous conversion to a 2wd Trailblazer chassis.

Excellent video, definitely deserves more views!

Looks good.

Awesome! I purchased the E Z Chassis kit to put my 55-59 cab and bed, onto a C10 / K10 chassis. I also found a K10 donner. Your video has provided me the motivation I need! Subscribed!

I stumbled upon this video while trying to get started on Physics and Calculus for the Spring semester beginning Jan. 17th, 2023. Unfortunately, this project may prove to be an unwanted distraction. But hey, sacrifices must be made.

So much good information on this one. Thanks for sharing your (and your Dad's) hard work. Subscribed.

Looks good subbed

Such a cool build! Just subbed, I'll be waiting updates!

Very enjoyable project you and your dad have going on here. Excited to see this continue for sure its gonna be a wonderful truck. I'm the 992nd subscriber almost to 1K!

Honestly it does sit higher but you now have 4 wheel drive! Looks awesome!

I have a 67 c10 on a 01 z71 Tahoe love it

Fantastic project 😎👍 Hopefully you give that cab a nice shiny paint job. It deserves it 🏆 Merry Christmas 🎁🎄

Awesome! Sub’d and watching y’all from Lilburn Ga.

wow that is cool.

Just Subbed your Channel, looking forward to the next video on this build it looks interesting

Hope you get more subs your video was awesome 👌 👏 👍

I'm new to your channel here that is gonna be one cool ass build.

I hadn't had even thought of that

Wish the shop that started my project knew about the adapter mounts you used. I might have been able to my 1985 donor.

Lost my Dad in 2021 and miss him immensely, but Happy and Thankful with every second my family and me had with him. Cherish every second you get with him!!! Looking forward to this build!!

Rad !

Here before this chanel blows up

Like it

I just put my 53 Chevy body on a 2010 Chevy 3500. It's pretty sweet!

I started a like project. I have a 57 GMC truck and was advised to transplant it onto a 1985 GMC truck. They do not match. The 57 frame is narrower than modern frames. Good luck. Thankfully I only paid $1,500 for the 1985 GMC. The only thing I kept was the 454BB.

Those beds are from 55 to 66 with some variation and step side beds up to the mid 70's will fit with minor mods, we put a bed off a 67 on dads 59 for several years until we got a 56 bed in better shape,

Looks like this is going to be an interesting build. Definitely be looking for new videos. Is there a way to keep the dash, firewall, and front of the floor and fit the 57 onto that? Would take some cutting lol. That kit made it sit so perfect on that chassis. So crazy that that part of the build went so smooth. Good luck

Go buy a few metal electrical boxes at Home Depot and use the slugs to weld up all those firewall holes. Dipping them in muratic acid will remove the galvanizing.

noice

You could put the steering colum in thr 57

Time for a update Pt2

Halfass customs just did this onto a 2500 frame,....similar

Looks great guys, How far from the bottom of the pinch welds under the door does the frame show under the body? Can you lower the body a couple inches with thinner cab mounts? Happy new Year!!

Hey - nice work so far. I'm interested to know where you got the 5.3 you swapped into the GMC prior to the build. I'm also in the Atlanta area (NW suburb) and have a 2005 GMC Yukon with 305K on the original engine and transmission. It's in good shape so I'm looking for a swap motor as the oil pressure idles at 20 and never get above 40. I did follow to see what happens with the build - good luck with it.

Just found this project. I really like the use of the 2004 as a frame. I have a 55 2nd gen GMC and was looking into using the 04. One problem that seemed like a problem was the location of the tires under the 55 fenders. Was that a problem for you? Did you have to narrow the wheel width to get the newer frame under the 50's fenders?

Hmmm sounds intersting... I youst to have a 57 Chevy truck will follow your build but have to close the curtain to the driveway so my 03 Yukon cant see what I am watching on youtube...Thought i would not do that to him!!

I have a 1964 3100 where do i can get the support to but on the cabinet in a chassis of a 2004 thaoe

I have just began the same Tahoe 57 Chevy swap. I purchased a 2001 Chevy Tahoe a year ago and just started working on it. I took off the body and I’m removing the wiring harness and plan on using a Psi harness. I have not started the easy chassis swap yet. If you have any more details on that please include I have looked all over for more details on that installation , and I am anxious to find more information. I will share my information as I proceed. How would we connect I would like to chat

If that Yukon has the bose system, I need the external amp. I think it is in the bottom of the console

Hey Joffrey love the Yukon-57 marriage. I want to do a Yukon Denali -57. Got a question. Will the EZ conversion cab mound allow you to lower cab possibly two inches?

I could sure use that headliner and window controls

Great job! What company made the conversion hardware?

All hail the small window! Hey is the wheelbase the same? No frame stretching eh?

So glad your not lowering it ! ! !

Thks for a great video it called easy chassis??? Please

Ctr mite have the correct bed

Sweet project! My daughter and I were talking about this a few weeks ago. Where in the North East are you? I may be interested in some of your leftovers

That is a 63-66 box I built a ton of those truck

are you going to paint it I hope or patina

Jeffery, what type of paint did you paint the frame with?