Be sure to follow us at www.boosted-ride.com boostedride boosted.ride
Пікірлер: 38
@Dr.MikeTuneoligist6 ай бұрын
Getting Jason's signature is like getting a hot check 😂
@gafrers6 ай бұрын
Nice work and update. Chaotic but aimed. So looking forward to more of this build.... and updates on the rest of the fleet
@swissmochaj6 ай бұрын
You guys aren't scared. Not afraid to just get at it. I'm sure you guys did some research on back halfing a Camaro. At least I hope you did lol. Looking forward to watching the build.
@Blain57006 ай бұрын
Awesome work so far. I think you just gave it it's name, "Nightmare". 🤘🤘
@Axial326 ай бұрын
YESSSS I AGREE with this name.!!!!
@adzmc37576 ай бұрын
Adz!! So much for not tubbing it 😂. I wouldn't worry about tying steel into the rear bar to save it. Just remove the bar before you skid. Hopefully you give yourself plenty of clearance on the rear guards now for skids and a meaty tyre for the drag track. Love watching the progress.
@colinlovelace59836 ай бұрын
It’s going to be a well built machine in the end, no worries…you guys do great work. You can always add anything back later on if you ever need it. Great vid…can’t wait for the next catch up vid. Always good to get Karl’s approval. 😉
@humble77366 ай бұрын
Great video again guys, slowly putting the puzzle back together 🤟
@51OWI6 ай бұрын
This build is gonna be sick man, cant wait for you guys to come to aus 🇦🇺👌🏻
@AZ-Patriot6 ай бұрын
On the wheel wells, you could roll some 1/8 sheets to reinforce it with a cutter on the bottom backside. That way, when you've got a gator back coming off the carcass of the tire, it'll get chopped off right away instead of beating up the fenders.
@Nissaninthewoods6 ай бұрын
No way 12 27 is my birthday. That's awesome!!! That would be a awesome wall hanger.
@1TX0UTLAW6 ай бұрын
Can't wait to see it burning some rubber! Like and share! 🎉
@markheineii78046 ай бұрын
Oh ya baby. Can't wait to see this thing rip.I don't care if Jason singed it or not I LOVE ME SOME BOOSTED RIDE.
@CarsCatAliens6 ай бұрын
This is gonna be a good one. I haven't ever seen a Camero I don't like...
@polatroyed86776 ай бұрын
Full Send! I was hoping you'd just cut it all out n get it down in the weeds... this is gunna be sweet! Some serious tubs with smash plates to take the steel belts destroying the bumper, this was every bit a perfect choice 👌 Rad 🎉🎉
@chopper11686 ай бұрын
I remember you were gonna do a belt give away. Will look good hanging next to mine in my garage.
@matthewmooch72106 ай бұрын
Hellllll Yeaaaaa Brotherrrrr!!!!!! Keep up the good work guys, like watch one off stuff getting build!!!
@blueracercam206 ай бұрын
Looking forward to seeing this car complete. But, please get rid of those hideous rims 😂
@caymccarp346 ай бұрын
Damn that puzzling trying to figure that stuff out. Im trying to learn from you guys. Just shared the video with all my car buddies too. 👍👍👍
@veto87926 ай бұрын
Man you guys do great work. Can’t wait to see it rippin. Hope to see you give Killa B a run for the money.
@veto87926 ай бұрын
Cleetus was trying to push tandem burnouts last year. Imagine this and Killa B on the skidpad at the same time. That would be sick.
@Labergemusic6 ай бұрын
Oh snap, you know I want that signed belt lol
@Richard-Bright6 ай бұрын
Have a look at Steve nogas's old yellow camaro.. now in cletus shop..
@Lured-in6 ай бұрын
If I win the blower belt, I’m going to hang it on the wall in my living room! I’m sure that my wife will love it! Bahaha!
@loganmcgillan24336 ай бұрын
Nice job bro look forward to that bad boy doing burnouts 👏👌😝
@polatroyed86776 ай бұрын
Cutty Cutty 🎉🎉🎉🎉
@veto87926 ай бұрын
Can I put a buckle on the belt to hold my pants up? 😂😂
@peterloescher30066 ай бұрын
Team KELLY for the win
@davidjohnson84746 ай бұрын
Id love to backhalf my 05 Dodge Magnum RT
@710performance6 ай бұрын
What rearend are you putting in it? When are you shooting to be done?
@dakotaharbert9356 ай бұрын
Watching you gut that car has me thinking, do you know how much any of the burnout rigs weigh?
@frankensteincreations47406 ай бұрын
Would’ve had to C-notch the sheet metal frame, and it would’ve been sh*t and flimsy… This way she’s going to be tough and rigid… 👍🤘👏
@Axial326 ай бұрын
Another follower had the great name idea for this car in the comments, Nitemare or Nightmare!
@dicknijenhuis98946 ай бұрын
Even the Dodge panel truck looked easier to build than the Camaro.
@NoMatureContent6 ай бұрын
Did chev really look at the Camaro tail lights and say "You know what these need? They need to be totally different and way uglier". What ever they did with that model was entirely unnecessary and completely inappropriate.
@robcameron55216 ай бұрын
Hook me up please bubby , ill pay postage to me in new zealand 😊 .
@skinnygreenpuppies6 ай бұрын
On our build we used 3 12 inch by 12 inch plate 1/4 thick I made a fender tub out of them for the rear. We made the back plate hang 2 inches lower on the back side and sharpened it so it would cut the tires as they were spinning instead of tearing the car up