6 Secrets for Synchronizing Cylinders

Рет қаралды 25,693

Күн бұрын

Schedule time with Corey: mentoredengineer.com/consulting/
Corey describes several ways to have two or more cylinders move at the same time. This is not an easy task!

Пікірлер: 12

@mode1charlie170 3 жыл бұрын

A pressure compensated flow divider would work as well.....

@MentoredEngineer 3 жыл бұрын

Yes, a pressure compensated flow divider, such as the one below, would do the same job as a gear style flow divider except it is in a cartridge valve form. www.sunhydraulics.com/model/FSCH,

@impactodelsurenterprise2440 3 жыл бұрын

You missed out the trusty cheap spool flow divider.

@depayton1979 2 жыл бұрын

Engineers always do It the hard way

@zachcooper6955 Жыл бұрын

Great video. I am trying to make a custom press brake and am having this issue. In the routing in double rotating cynlinder section; wont this create three independent 'systems', one from the power source, one between the two cyl., one seemingly drawing from the dump tank? How would you accurately bleed the middle system connecting the two cylinders and can you draw from a dump tank? Thanks!!

@MentoredEngineer Жыл бұрын

@zachcooper6955 This is difficult to discuss over KZfaq. Please sign up for Office Hours or schedule a time with me at the links below. mentoredengineer.com/product/office-hours-with-corey/ calendly.com/mentoredengineer/brainpicking?month=2023-01

@Callmedstone 2 жыл бұрын

Dat life jacket tho 🏊‍♀️ 🚁 🤿

@atharhaider44 2 жыл бұрын

Hi, We've a rotary (gear type) flow divider in our cylinders but still these cylinders move with different speeds. What could be the solution for this?

@atharhaider44 2 жыл бұрын

There is more time difference in the movement of both cylinders

@MentoredEngineer 2 жыл бұрын

Do you have a schematic and the loads on each motor? Look up my contact info at mentoredengineer.com to send the information

@sridharsudharshanam4157 7 ай бұрын

Hi Sir, Can i get 3 cylinders sycronizing

@MentoredEngineer 7 ай бұрын

3 cylinders can be difficult. If you can't mechanically tie them together, I would try to meter the flow out of each cylinder with a flow control valve. After that, you will need to add some sort of electronic control system that measure the stroke and then changes the flow of oil as needed. I'm facing the same challenge right now, but with 10 cylinders all having varying loads.